你好版主，我从
http://android.git.kernel.org/下载到了android-2.6.36.tar.gz内核在编译都正常，可是在启动中信息中看到每个驱动都执行了两次
R_IRQS:246
VIC @f4000000: id 0x00041192, vendor 0x41
VIC @f4010000: <d 0x00041192, vendor 0x41
Console: colour dummy device 80x30
6>console [ttySAC0] enabled
console [ttySAC0] enabled
<6>Calibrating delay loop... Calibrating delay loop... <c>530.84 BogoMIPS (lpj=2654208)
530.84 BogoMIPS (lpj=2654208)
<6>pid_max: default: 32768 minimum: 301
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: CPU: Testing write buffer coherency: ok
ok
<6>s3c64xx_dma_init: Registering DMA channels
s3c64xx_dma_init: Registering DMA channels
<6>s3c64xx_dma_init1: registering DMA 0 (ce808100)
s3c64xx_dma_init1: registering DMA 0 (ce808100)
<6>s3c64xx_dma_init1: registering DMA 1 (ce808120)
s3c64xx_dma_init1: registering DMA 1 (ce808120)
<6>s3c64xx_dma_init1: registering DMA 2 (ce808140)
s3c64xx_dma_init1: registering DMA 2 (ce808140)
<6>s3c64xx_dma_init1: registering DMA 3 (ce808160)
s3c64xx_dma_init1: registering DMA 3 (ce808160)
<6>s3c64xx_dma_init1: registering DMA 4 (ce808180)
s3c64xx_dma_init1: registering DMA 4 (ce808180)
<6>s3c64xx_dma_init1: registering DMA 5 (ce8081a0)
s3c64xx_dma_init1: registering DMA 5 (ce8081a0)
<6>s3c64xx_dma_init1: registering DMA 6 (ce8081c0)
s3c64xx_dma_init1: registering DMA 6 (ce8081c0)
<6>s3c64xx_dma_init1: registering DMA 7 (ce8081e0)
s3c64xx_dma_init1: registering DMA 7 (ce8081e0)
<6>PL080: IRQ 73, at ce808000
PL080: IRQ 73, at ce808000
<6>s3c64xx_dma_init1: registering DMA 8 (ce80c100)
s3c64xx_dma_init1: registering DMA 8 (ce80c100)
<6>s3c64xx_dma_init1: registering DMA 9 (ce80c120)
s3c64xx_dma_init1: registering DMA 9 (ce80c120)
<6>s3c64xx_dma_init1: registering DMA 10 (ce80c140)
s3c64xx_dma_init1: registering DMA 10 (ce80c140)
<6>s3c64xx_dma_init1: registering DMA 11 (ce80c160)
s3c64xx_dma_init1: registering DMA 11 (ce80c160)
<6>s3c64xx_dma_init1: registering DMA 12 (ce80c180)
s3c64xx_dma_init1: registering DMA 12 (ce80c180)
<6>s3c64xx_dma_init1: registering DMA 13 (ce80c1a0)
s3c64xx_dma_init1: registering DMA 13 (ce80c1a0)
<6>s3c64xx_dma_init1: registering DMA 14 (ce80c1c0)
s3c64xx_dma_init1: registering DMA 14 (ce80c1c0)
<6>s3c64xx_dma_init1: registering DMA 15 (ce80c1e0)
s3c64xx_dma_init1: registering DMA 15 (ce80c1e0)
<6>PL080: IRQ 74, at ce80c000
PL080: IRQ 74, at ce80c000
S3C6410: Initialising architecture
S3C6410: Initialising architecture
bio: create slab <bio-0> at 0
bio: create slab <bio-0> at 0
<6>usbcore: registered new interface driver usbfs
usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
usbcore: registered new device driver usb
<6>s3c-i2c s3c2440-i2c.0: slave address 0x10
s3c-i2c s3c2440-i2c.0: slave address 0x10
<6>s3c-i2c s3c2440-i2c.0: bus frequency set to 64 KHz
s3c-i2c s3c2440-i2c.0: bus frequency set to 64 KHz
<6>s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
<6>s3c-i2c s3c2440-i2c.1: slave address 0x10
s3c-i2c s3c2440-i2c.1: slave address 0x10
<6>s3c-i2c s3c2440-i2c.1: bus frequency set to 64 KHz
s3c-i2c s3c2440-i2c.1: bus frequency set to 64 KHz
<6>s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
<6>ROMFS MTD (C) 2007 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
<6>io scheduler noop registered
io scheduler noop registered
<6>io scheduler deadline registered
io scheduler deadline registered
<6>io scheduler cfq registered (default)
io scheduler cfq registered (default)
<6>s3c-fb s3c-fb: window 0: fb
s3c-fb s3c-fb: window 0: fb
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
<6>s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
<6>s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
<6>s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
<6>brd: module loaded
brd: module loaded
<6>loop: module loaded
loop: module loaded
<6>at24 0-0050: 1024 byte 24c08 EEPROM (writable)
at24 0-0050: 1024 byte 24c08 EEPROM (writable)
<6>at24 1-0057: 16384 byte 24c128 EEPROM (writable)
at24 1-0057: 16384 byte 24c128 EEPROM (writable)
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
<6>s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
<6>s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
<3>s3c2410-ohci s3c2410-ohci: init err (00000000 0000)
s3c2410-ohci s3c2410-ohci: init err (00000000 0000)
<3>ohci_hcd: can't start s3c24xx
ohci_hcd: can't start s3c24xx
<3>s3c2410-ohci s3c2410-ohci: startup error -75
s3c2410-ohci s3c2410-ohci: startup error -75
<6>s3c2410-ohci s3c2410-ohci: USB bus 1 deregistered
s3c2410-ohci s3c2410-ohci: USB bus 1 deregistered
<4>s3c2410-ohci: probe of s3c2410-ohci failed with error -75
s3c2410-ohci: probe of s3c2410-ohci failed with error -75
<6>mice: PS/2 mouse device common for all mice
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
<6>s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
<6>using rtc device, s3c, for alarmsusing rtc device, s3c, for alarms<6>s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
<6>i2c /dev entries driver
i2c /dev entries driver
<6>sdhci: Secure Digital Host Controller Interface driver
sdhci: Secure Digital Host Controller Interface driver
<6>sdhci: Copyright(c) Pierre Ossman
sdhci: Copyright(c) Pierre Ossman
<6>s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
<6>s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
<6>s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (24000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (24000000 Hz)
<7>sdhci [sdhci_add_host()]: Disabling DMA as it is marked broken
以上是我的启动信息
而用你们的36内核是没有这种状况发生的，向你请教一下，你们的android内核是从这个网站下载的吗？ 还是需要修改哪些代码？每个驱动都好像执行两次是个什么状况？
