主题 : 请问版主有关于2440的 uboot 的源码啊!! 光盘里都是 2410的 复制链接 | 浏览器收藏 | 打印
级别: 新手上路
UID: 2189
精华: 0
发帖: 3
金钱: 30 两
威望: 30 点
贡献值: 0 点
综合积分: 6 分
注册时间: 2008-10-31
最后登录: 2009-03-12
楼主  发表于: 2009-03-07 23:04

 请问版主有关于2440的 uboot 的源码啊!! 光盘里都是 2410的

管理提醒: 本帖被 arm9home 从 Linux技术交流专区 移动到本区(2010-02-08)
可以放进去啊
*無鈳取玳
级别: 论坛版主
UID: 27
精华: 12
发帖: 5398
金钱: 40120 两
威望: 17929 点
贡献值: 71 点
综合积分: 11036 分
注册时间: 2008-01-16
最后登录: 2014-11-22
1楼  发表于: 2009-03-08 08:36
据我所知, 事实上友善之臂从来没有正式发布过mini2440的u-boot,
光盘上"OpenSourceBootloader"目录下的u-boot-1.1.6-FA24x0.tar.gz源代码是友善之臂在原始的u-boot 1.1.6基础上打了网上一些开发者开发的针对S3C2440的u-boot补丁, 可以支持Mini2440开发板.
如果你需要比较新的版本的u-boot, 可以试试
1) 本站用户hugerat移植的u-boot 2008.10 (http://www.aiothome.com/bbs/read.php?tid=1090)
2) 我之前为QQ2440做的一个版本, 应该可以支持mini2440的NAND Flash启动模式, http://www.aiothome.com/bbs/read.php?tid=125
我最近会更新这个版本, 加入对mini2440的支持
"If you have an apple and I have an apple and we exchange apples, then you and I will
still each have one apple. But if you have an idea and I have an idea and we exchange
these ideas, then each of us will have two ideas."
*無鈳取玳
级别: 论坛版主
UID: 27
精华: 12
发帖: 5398
金钱: 40120 两
威望: 17929 点
贡献值: 71 点
综合积分: 11036 分
注册时间: 2008-01-16
最后登录: 2014-11-22
2楼  发表于: 2009-03-08 08:47
u-boot-1.1.6-FA24x0.tar.gz中所用的配置文件是include\configs\open24x0.h或include\configs\open24x0_legacy.h. 板级的修改在board\open24x0目录下. 用make open24x0_config来配置
"If you have an apple and I have an apple and we exchange apples, then you and I will
still each have one apple. But if you have an idea and I have an idea and we exchange
these ideas, then each of us will have two ideas."
*無鈳取玳
级别: 论坛版主
UID: 27
精华: 12
发帖: 5398
金钱: 40120 两
威望: 17929 点
贡献值: 71 点
综合积分: 11036 分
注册时间: 2008-01-16
最后登录: 2014-11-22
3楼  发表于: 2009-03-17 18:20
按键是为了让bootload中止自动启动内核并进入交互模式.你还是把操作步骤和串口终端输出的信息贴出来,否则至少我没法理解你在说什么:)
"If you have an apple and I have an apple and we exchange apples, then you and I will
still each have one apple. But if you have an idea and I have an idea and we exchange
these ideas, then each of us will have two ideas."