主题 : 编译android出差如下错误,请教! 复制链接 | 浏览器收藏 | 打印
我的个性签名
级别: 新手上路
UID: 28128
精华: 0
发帖: 42
金钱: 210 两
威望: 42 点
贡献值: 0 点
综合积分: 84 分
注册时间: 2010-09-06
最后登录: 2013-08-07
楼主  发表于: 2011-06-17 15:33

 编译android出差如下错误,请教!

Looking up port of RPC 100003/2 on 192.168.1.85
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Looking up port of RPC 100005/1 on 192.168.1.85
VFS: Mounted root (nfs filesystem).
Freeing init memory: 152K
Warning: unable to open an initial console.
init: reading config file
init: before for loop<6>init: processing action 0x28068 (early-init)
init: processing action 0x28068 (early-init)
init: starting 'ueventd'
init: command 'start' r=0
init: command 'start' r=0
init: starting ueventd
init: processing action 0x2be68 (wait_for_coldboot_done)
init: processing action 0x2be68 (wait_for_coldboot_done)
init: /sys/ rule /sys/devices/virtual/input/input* enable
init: /sys/ rule /sys/devices/virtual/input/input* poll_delay
init: /sys/ rule /sys/devices/virtual/usb_composite/* enable
init: wait for /dev/.coldboot_done
init: fixup /sys/devices/virtual/input/input1/enable 0 1004 0660
init: fixup /sys/devices/virtual/input/input1/poll_delay 0 1004 0660
init: fixup /sys/devices/virtual/input/input1/mouse0/enable 0 1004 0660
init: fixup /sys/devices/virtual/input/input1/mouse0/poll_delay 0 1004 0660
init: fixup /sys/devices/virtual/input/input1/event1/enable 0 1004 0660
init: fixup /sys/devices/virtual/input/input1/event1/poll_delay 0 1004 0660
init: command 'wait_for_coldboot_done' r=0
init: command 'wait_for_coldboot_done' r=0
init: processing action 0x2beb0 (property_init)
init: processing action 0x2beb0 (property_init)
init: property init
init: command 'property_init' r=0
init: command 'property_init' r=0
init: processing action 0x2bef8 (keychord_init)
init: processing action 0x2bef8 (keychord_init)
init: command 'keychord_init' r=0
init: command 'keychord_init' r=0
init: processing action 0x2bf40 (console_init)
init: processing action 0x2bf40 (console_init)
init: before open tty0<6>init: before ioctl<3>init: cannot open '/initlogo.rle'
init: before open tty0<6>init: before ioctl<3>init:  fd>0 <3>init:  before write char <3>init:  after close fd <3>init:  before return 0 <6>init: command 'console_init' r=0
init: command 'console_init' r=0
init: processing action 0x2bf88 (set_init_properties)
init: processing action 0x2bf88 (set_init_properties)
init: command 'set_init_properties' r=0
init: command 'set_init_properties' r=0
init: processing action 0x280b8 (init)
init: processing action 0x280b8 (init)
init: command 'sysclktz' r=0
init: command 'sysclktz' r=0
init: command 'loglevel' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'symlink' r=0
init: command 'symlink' r=0
init: command 'symlink' r=0
init: command 'mkdir' r=-1
init: command 'mkdir' r=-1
init: command 'mkdir' r=0
init: command 'mount' r=-1
init: command 'mkdir' r=0
init: command 'symlink' r=0
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=-1
init: command 'mkdir' r=-1
init: command 'mkdir' r=-1
init: command 'mkdir' r=-1
init: command 'mkdir' r=-1
init: command 'mkdir' r=-1
init: command 'mount' r=0
init: command 'mkdir' r=-1
init: command 'mount' r=0
init: command 'write' r=0
init: command 'write' r=-2
init: command 'write' r=0
init: command 'write' r=-2
init: command 'write' r=-2
init: command 'write' r=0
init: command 'write' r=-2
init: command 'mkdir' r=0
init: command 'mount' r=-1
init: command 'chown' r=0
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'write' r=0
init: command 'mkdir' r=0
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'write' r=0
init: command 'write' r=0
init: command 'mkdir' r=0
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'write' r=0
init: processing action 0x28960 (fs)
Kernel panic - not syncing: Attempted to kill init!










^很多问题的背后都是简单的原因......
级别: 荣誉会员
UID: 34780
精华: 0
发帖: 1219
金钱: 6230 两
威望: 1246 点
贡献值: 0 点
综合积分: 2438 分
注册时间: 2010-12-21
最后登录: 2017-09-18
1楼  发表于: 2011-06-18 11:13
建议你先说明一下用的是什么板, 怎么编译的, 这个错误是怎么操作后出现的......否则光看这些信息, 没法知道是怎么回事
我的个性签名
级别: 新手上路
UID: 28128
精华: 0
发帖: 42
金钱: 210 两
威望: 42 点
贡献值: 0 点
综合积分: 84 分
注册时间: 2010-09-06
最后登录: 2013-08-07
2楼  发表于: 2011-06-19 18:40
我是tiny6410的板子,从官网下载的gingerbread源码,
放入friendly arm定制的vendor文件夹,然后又做了一些适应环境的修改,
然后编译的。
我的个性签名
级别: 新手上路
UID: 28128
精华: 0
发帖: 42
金钱: 210 两
威望: 42 点
贡献值: 0 点
综合积分: 84 分
注册时间: 2010-09-06
最后登录: 2013-08-07
3楼  发表于: 2011-06-19 18:44
忘了说明了,编译是成功的,这是nfs挂载后运行报的错。
^很多问题的背后都是简单的原因......
级别: 荣誉会员
UID: 34780
精华: 0
发帖: 1219
金钱: 6230 两
威望: 1246 点
贡献值: 0 点
综合积分: 2438 分
注册时间: 2010-12-21
最后登录: 2017-09-18
4楼  发表于: 2011-06-20 09:37
NFS好像是不支持的, 建议直接烧写试试看
我的个性签名
级别: 新手上路
UID: 28128
精华: 0
发帖: 42
金钱: 210 两
威望: 42 点
贡献值: 0 点
综合积分: 84 分
注册时间: 2010-09-06
最后登录: 2013-08-07
5楼  发表于: 2011-06-20 15:26
支持的,用现成的是可以的,
自己编译的就不行了。

init: command 'wait_for_coldboot_done' r=0
init: processing action 0x2beb0 (property_init)
init: property init
init: command 'property_init' r=0
init: processing action 0x2bef8 (keychord_init)
init: command 'keychord_init' r=0
init: processing action 0x2bf40 (console_init)
init: before open tty0<6>init: before ioctl<3>init: cannot open '/initlogo.rle'
init: before open tty0<6>init: before ioctl<6>init: command 'console_init' r=0
init: processing action 0x2bf88 (set_init_properties)
init: command 'set_init_properties' r=0
init: processing action 0x280b8 (init)
init: command 'sysclktz' r=0
Kernel panic - not syncing: Attempted to kill init!
我的个性签名
级别: 新手上路
UID: 28128
精华: 0
发帖: 42
金钱: 210 两
威望: 42 点
贡献值: 0 点
综合积分: 84 分
注册时间: 2010-09-06
最后登录: 2013-08-07
6楼  发表于: 2011-06-21 16:58
执行  ” loglevel 3“
这个init.rc中的语句就挂起了


init: command 'sysclktz' r=0
666:cur_command:        loglevel 3
Kernel panic - not syncing: Attempted to kill init!