刷了31号的新系统nanopi2-debian-sd4g-wifiap.img后串口调试信息如下:
--------------------------------------------------------------------------------
Second Boot by Nexell Co. : Built on Nov 19 2014 20:10:38
--------------------------------------------------------------------------------
PLL0: 550000000 PLL1: 1200000000 PLL2: 800000000 PLL3: 612000000
Divider0 PLL: 1 CPU:1200000000 CPU BUS:300000000
Divider1 PLL: 2 BCLK:400000000 PCLK:200000000
Divider2 PLL: 2 MDCLK:800000000 MCLK:800000000
MBCLK:400000000 MPCLK:200000000
Divider3 PLL: 0 G3D BCLK:550000000
Divider4 PLL: 2 MPEG BCLK:400000000 MPEG PCLK:200000000
123
DDR3 POR Init Start
phy init
########## READ/GATE Level ##########
DDR3 Init Done!
Loading from sdmmc...
Image Loading Done!
Launch to 0x42C00000
U-Boot 2014.07-g4046724 (Dec 30 2015 - 16:46:21)
PLL : [0] = 550000000, [1] = 1200000000, [2] = 800000000, [3] = 614399000
PLL1: CPU FCLK = 1200000000, HCLK = 300000000
PLL2: BUS BCLK = 400000000, PCLK = 200000000
PLL2: MEM MCLK = 800000000, DCLK = 800000000, BCLK = 400000000, PCLK = 200000000
PLL0: G3D BCLK = 550000000
PLL2: MPG BCLK = 400000000, PCLK = 200000000
I2C: ready
DRAM: 256 MiB
Heap = 0x43000000~0x45000000
Code = 0x42c00000~0x42c72984
GLD = 0x42bffeb8
GLBD = 0x42bffe68
SP = 0x42bffe68,0x42bffe50(CURR)
PC = 0x42c06114
TAGS = 0x40000100
PAGE = 0x42c80000~0x42c8c000
MACH = [4330]
VER = 1
BOARD= [nanopi2]
LCD = N/A (-1)
MMC: NXP DWMMC: 0, NXP DWMMC: 1, NXP DWMMC: 2
In: serial
Out: serial
Err: serial
switch to partitions #0, OK
mmc0 is current device
Writing to MMC(0)... done
Writing to MMC(0)... done
HDMI: display.0, preset 0 (1280 * 720)
HDMI: PHY Ready!!!
DONE: Logo bmp 800 by 480 (3bpp), len=1152056
DRAW: 0x47000000 -> 0x46000000
Hit any key to stop autoboot: 1 0
## Booting kernel from Legacy Image at 48000000 ...
Image Name: Linux-3.4.39-FriendlyARM
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4480744 Bytes = 4.3 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.39-FriendlyARM (root@jensen) (gcc version 4.9.3 (ctng-1.21.0-229g-FA) ) #133 SMP PREEMPT Thu Dec 31 17:31:38 HKT 2015
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: NANOPI2
[ 0.000000] Display: HDMI selected
[ 0.000000] nxp_reserve_mem: reserve CMA: size 201326592
[ 0.000000] NXP/CMA: Reserved 0x74000000/0x0c000000 for 'ion'
[ 0.000000] NXP/CMA: success register cma region for 'ion'
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU : iomap[ 0]: p 0xc0000000 -> v 0xf0000000 len=0x300000
[ 0.000000] CPU : iomap[ 1]: p 0xf0000000 -> v 0xf0300000 len=0x100000
[ 0.000000] CPU : iomap[ 2]: p 0xcf000000 -> v 0xf0400000 len=0x100000
[ 0.000000] CPU : iomap[ 3]: p 0x2c000000 -> v 0xf0500000 len=0x100000
[ 0.000000] CPU : iomap[ 4]: p 0x00000000 -> v 0xf0600000 len=0x100000
[ 0.000000] CPU : DMA Zone Size =16M, CORE 4
[ 0.000000] CPU : VERSION = 2 (0xE153000A), Assign Peripheral Exclusive Bus
[ 0.000000] s5p4418-NanoPi2: Board initialized
[ 0.000000] CPU : Clock Generator= 64 EA, DVFS = support, PLL.1
[ 0.000000] PLL : [0] = 550000000, [1] = 1200000000, [2] = 800000000, [3] = 614399000
[ 0.000000] PLL1: CPU FCLK = 1200000000, HCLK = 300000000
[ 0.000000] PLL2: BUS BCLK = 400000000, PCLK = 200000000
[ 0.000000] PLL2: MEM MCLK = 800000000, DCLK = 800000000, BCLK = 400000000, PCLK = 200000000
[ 0.000000] PLL0: G3D BCLK = 550000000
[ 0.000000] PLL2: MPG BCLK = 400000000, PCLK = 200000000
[ 0.000000] PERCPU: Embedded 8 pages/cpu @812a7000 s12288 r8192 d12288 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
[ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 init=/sbin/init systemd.show_status=false g_ether.host_addr=82:cf:ce:fa:44:18 lcd=HDMI720P60
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 829884k/829884k available, 218692k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc0800000 - 0xfee00000 ( 998 MB)
[ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB)
[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
[ 0.000000] .text : 0x80008000 - 0x8081b018 (8269 kB)
[ 0.000000] .init : 0x8081c000 - 0x80854000 ( 224 kB)
[ 0.000000] .data : 0x80854000 - 0x808c5bf8 ( 455 kB)
[ 0.000000] .bss : 0x808c5c1c - 0x8099f400 ( 870 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:288
[ 0.000000] VIC @f0002000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @f0003000: id 0x00041192, vendor 0x41
[ 0.000000] GPIO @f001a000: start 64, mask 0xffffffff (gpio 53)
[ 0.000000] GPIO @f001b000: start 96, mask 0xffffffff (gpio 54)
[ 0.000000] GPIO @f001c000: start 128, mask 0xffffffff (gpio 55)
[ 0.000000] GPIO @f001d000: start 160, mask 0xffffffff (gpio 56)
[ 0.000000] GPIO @f001e000: start 192, mask 0xffffffff (gpio 57)
[ 0.000000] ALIVE @f0010800: start 224, mask 0x000000ff (alive 4)
[ 0.000000] GIC @f0301000: start 256 (vic 31)
[ 0.000000] timer.0: source, 10000000(HZ:250), mult:3355443200
[ 0.000000] timer.1: event , 10000000(HZ:250), mult:42949673
[ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 4294967292ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 2390.01 BogoMIPS (lpj=4780032)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.036000] Security Framework initialized
[ 0.036000] SELinux: Initializing.
[ 0.036000] Mount-cache hash table entries: 512
[ 0.036000] Initializing cgroup subsys debug
[ 0.036000] Initializing cgroup subsys cpuacct
[ 0.036000] Initializing cgroup subsys memory
[ 0.036000] Initializing cgroup subsys freezer
[ 0.036000] CPU: Testing write buffer coherency: ok
[ 0.036000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[ 0.036000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.036000] Setting up static identity map for 0x405f0e08 - 0x405f0e60
[ 0.036000] L310 cache controller enabled
[ 0.036000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x70470001, Cache size: 1048576 B
[ 0.076000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[ 0.108000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[ 0.140000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[ 0.140000] Brought up 4 CPUs
[ 0.140000] SMP: Total of 4 processors activated (9560.06 BogoMIPS).
[ 0.140000] devtmpfs: initialized
[ 0.144000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.144000] pwm: max = 50000000 hz
[ 0.144000] prepare_gpio_suspend:
[ 0.144000] alfn[0][0]: 0x00000000, alfn[0][1]: 0x00000000
[ 0.144000] alfn[1][0]: 0x66800000, alfn[1][1]: 0x55555566
[ 0.144000] alfn[2][0]: 0x55555555, alfn[2][1]: 0x00555555
[ 0.144000] alfn[3][0]: 0x00000000, alfn[3][1]: 0x00000000
[ 0.144000] alfn[4][0]: 0x00000000, alfn[4][1]: 0x55540000
[ 0.144000] dummy:
[ 0.144000] NET: Registered protocol family 16
[ 0.144000] [Register machine platform devices]
[ 0.144000] mach: add amba device uart-pl011.0
[ 0.144000] mach: add amba device uart-pl011.1
[ 0.144000] mach: add amba device uart-pl011.3
[ 0.144000] mach: add amba device uart-pl011.4
[ 0.144000] mach: add amba device pl08xdmac.0
[ 0.144000] mach: add amba device pl08xdmac.1
[ 0.144000] mach: add amba device ssp-pl022.0
[ 0.148000] mach: add device syncgen [2]
[ 0.148000] mach: add device hdmi
[ 0.148000] mach: add device i2c bus (array:3)
[ 0.148000] mach: add device Real Time Clock
[ 0.148000] mach: add device generic pwm (array:2)
[ 0.148000] mach: add device generic gpio (array:6)
[ 0.148000] mach: add device i2s (array:1)
[ 0.148000] mach: add device spdif tx
[ 0.148000] mach: add device usb_ehci
[ 0.148000] mach: add device usb_ohci
[ 0.148000] mach: add device usb otg
[ 0.148000] mach: add device ion-nxp
[ 0.148000] mach: add device adc
[ 0.148000] mach: add graphic device opengl|es
[ 0.148000] [Register board platform devices]
[ 0.148000] plat: board revision 0
[ 0.148000] plat: add dynamic frequency (pll.1)
[ 0.148000] plat: add framebuffer
[ 0.148000] plat: add device sdmmc [0]
[ 0.152000] plat: add device sdmmc [1]
[ 0.152000] plat: add device sdmmc [2]
[ 0.152000] plat: add backlight pwm device
[ 0.152000] plat: add device keypad
[ 0.152000] plat: add device fixed voltage
[ 0.152000] plat: add device spdif playback
[ 0.152000] plat: add device nxp-v4l2
[ 0.152000] camera_power_control: failed to regulator_get() for vcam1_1.8Vplat: register spidev
[ 0.160000] plat: add touch(ft5x0x) device
[ 0.160000] plat: add onewire ts device
[ 0.160000] plat: add device gpio_led
[ 0.160000]
[ 0.160000] hw-breakpoint: Debug register access (0xee113e95) caused undefined instruction on CPU 1
[ 0.160000] hw-breakpoint: Debug register access (0xee113e95) caused undefined instruction on CPU 2
[ 0.160000] hw-breakpoint: Debug register access (0xee113e95) caused undefined instruction on CPU 3
[ 0.160000] hw-breakpoint: CPU 2 debug is powered down!
[ 0.160000] hw-breakpoint: CPU 3 debug is powered down!
[ 0.160000] hw-breakpoint: CPU 1 debug is powered down!
[ 0.160000] hw-breakpoint: Debug register access (0xee113e95) caused undefined instruction on CPU 0
[ 0.160000] hw-breakpoint: CPU 0 debug is powered down!
[ 0.160000] Serial: AMBA PL011 UART driver
[ 0.160000] uart-pl011.0: ttyAMA0 at MMIO 0xc00a1000 (irq = 7) is a PL011 rev3
[ 0.164000] console [ttyAMA0] enabled
[ 0.168000] uart-pl011.1: ttyAMA1 at MMIO 0xc00a0000 (irq = 6) is a PL011 rev3
[ 0.172000] uart-pl011.3: ttyAMA2 at MMIO 0xc00a3000 (irq = 9) is a PL011 rev3
[ 0.176000] uart-pl011.4: ttyAMA3 at MMIO 0xc006d000 (irq = 10) is a PL011 rev3
[ 0.192000] bio: create slab <bio-0> at 0
[ 0.196000] gpiochip_add: registered GPIOs 0 to 31 on device: nxp-gpio.0
[ 0.200000] gpiochip_add: registered GPIOs 32 to 63 on device: nxp-gpio.1
[ 0.204000] gpiochip_add: registered GPIOs 64 to 95 on device: nxp-gpio.2
[ 0.208000] gpiochip_add: registered GPIOs 96 to 127 on device: nxp-gpio.3
[ 0.212000] gpiochip_add: registered GPIOs 128 to 159 on device: nxp-gpio.4
[ 0.216000] gpiochip_add: registered GPIOs 160 to 167 on device: nxp-gpio.5
[ 0.220000] pl08xdmac pl08xdmac.0: Unbalanced pm_runtime_enable!
[ 0.224000] pl08xdmac pl08xdmac.0: initialized 8 virtual memcpy channels
[ 0.228000] pl08xdmac pl08xdmac.0: initialized 16 virtual slave channels
[ 0.232000] pl08xdmac pl08xdmac.0: DMA: PL080 rev1 at 0xc0000000 irq 1
[ 0.236000] pl08xdmac pl08xdmac.1: Unbalanced pm_runtime_enable!
[ 0.240000] pl08xdmac pl08xdmac.1: initialized 8 virtual memcpy channels
[ 0.244000] pl08xdmac pl08xdmac.1: initialized 15 virtual slave channels
[ 0.248000] pl08xdmac pl08xdmac.1: DMA: PL080 rev1 at 0xc0001000 irq 2
[ 0.252000] fixed_vdds: 1350 mV
[ 0.252000] nxp_ion_probe success!!!
[ 0.256000] SCSI subsystem initialized
[ 0.260000] ssp-pl022 ssp-pl022.0: ARM PL022 driver, device ID: 0x00041022
[ 0.264000] pl022: mapped registers from 0xc005b000 to f005b000
[ 0.268000] ssp-pl022 ssp-pl022.0: setup for DMA on RX dma1chan7, TX dma1chan6
[ 0.272000] ssp-pl022 ssp-pl022.0: will use autosuspend for runtime pm, delay 10ms
[ 0.276000] usbcore: registered new interface driver usbfs
[ 0.280000] usbcore: registered new interface driver hub
[ 0.284000] usbcore: registered new device driver usb
[ 0.292000] nxp-i2c.0: 390625 hz [pclk=200000000, clk = 256, scale= 1, timeout= 500 ms]
[ 0.296000] nxp-i2c.1: 97656 hz [pclk=200000000, clk = 256, scale= 7, timeout= 500 ms]
[ 0.300000] nxp-i2c.2: 195312 hz [pclk=200000000, clk = 256, scale= 3, timeout= 500 ms]
[ 0.304000] Linux media interface: v0.10
[ 0.308000] Linux video capture interface: v2.00
[ 0.316000] pps_core: LinuxPPS API ver. 1 registered
[ 0.320000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 0.324000] PTP clock support registered
[ 0.328000] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.332000] Bluetooth: Core ver 2.16
[ 0.336000] NET: Registered protocol family 31
[ 0.340000] Bluetooth: HCI device and connection manager initialized
[ 0.344000] Bluetooth: HCI socket layer initialized
[ 0.348000] Bluetooth: L2CAP socket layer initialized
[ 0.352000] Bluetooth: SCO socket layer initialized
[ 0.356000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.356000] Switching to clocksource source timer
[ 0.376000] NET: Registered protocol family 2
[ 0.380000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.388000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.396000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.404000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.412000] TCP: reno registered
[ 0.416000] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.428000] NET: Registered protocol family 1
[ 0.432000] RPC: Registered named UNIX socket transport module.
[ 0.436000] RPC: Registered udp transport module.
[ 0.444000] RPC: Registered tcp transport module.
[ 0.448000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.456000] Disply Reset Status : On
[ 0.460000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.464000] i2c.1 addr 0xa0 (try:1)
[ 0.468000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.476000] i2c.1 addr 0xa0 (try:2)
[ 0.480000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.484000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.492000] i2c.1 addr 0xa0 (try:1)
[ 0.492000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.500000] i2c.1 addr 0xa0 (try:2)
[ 0.504000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.508000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.516000] i2c.1 addr 0xa0 (try:1)
[ 0.520000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.524000] i2c.1 addr 0xa0 (try:2)
[ 0.528000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.568000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.572000] i2c.1 addr 0xa0 (try:1)
[ 0.576000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.584000] i2c.1 addr 0xa0 (try:2)
[ 0.584000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.592000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.596000] i2c.1 addr 0xa0 (try:1)
[ 0.600000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.608000] i2c.1 addr 0xa0 (try:2)
[ 0.612000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.616000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.624000] i2c.1 addr 0xa0 (try:1)
[ 0.628000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.632000] i2c.1 addr 0xa0 (try:2)
[ 0.636000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.672000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.676000] i2c.1 addr 0xa0 (try:1)
[ 0.680000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.688000] i2c.1 addr 0xa0 (try:2)
[ 0.688000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.696000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.700000] i2c.1 addr 0xa0 (try:1)
[ 0.704000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.712000] i2c.1 addr 0xa0 (try:2)
[ 0.716000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.720000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.728000] i2c.1 addr 0xa0 (try:1)
[ 0.732000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.736000] i2c.1 addr 0xa0 (try:2)
[ 0.740000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.776000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.780000] i2c.1 addr 0xa0 (try:1)
[ 0.784000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.792000] i2c.1 addr 0xa0 (try:2)
[ 0.792000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.800000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.804000] i2c.1 addr 0xa0 (try:1)
[ 0.808000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.816000] i2c.1 addr 0xa0 (try:2)
[ 0.820000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.824000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.832000] i2c.1 addr 0xa0 (try:1)
[ 0.836000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.840000] i2c.1 addr 0xa0 (try:2)
[ 0.844000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.880000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.884000] i2c.1 addr 0xa0 (try:1)
[ 0.888000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.896000] i2c.1 addr 0xa0 (try:2)
[ 0.896000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.904000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.908000] i2c.1 addr 0xa0 (try:1)
[ 0.912000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.920000] i2c.1 addr 0xa0 (try:2)
[ 0.924000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.928000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.936000] i2c.1 addr 0xa0 (try:1)
[ 0.940000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 0.944000] i2c.1 addr 0xa0 (try:2)
[ 0.948000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 0.984000] _edid_i2c_read: can't read data, timeout
[ 0.988000] _edid_read_block: failed to _edid_i2c_read ret -62
[ 0.992000] hdmi_get_edid_preset: failed to edid update
[ 1.000000] Display HDMI register operation
[ 1.004000] Display.0 fps=161 (6 ms), wait= 4 jiffies, Pixelclk=200000000hz
[ 1.008000] bt_bcm: rfkill initialized
[ 1.012000] audit: initializing netlink socket (disabled)
[ 1.020000] type=2000 audit(1.020:1): initialized
[ 1.028000] NFS: Registering the id_resolver key type
[ 1.036000] fuse init (API version 7.18)
[ 1.040000] msgmni has been set to 1620
[ 1.044000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.052000] io scheduler noop registered
[ 1.056000] io scheduler deadline registered
[ 1.060000] io scheduler cfq registered (default)
[ 1.064000] display.0 connected to fb.0 ...
[ 1.068000] nxp-fb.0: dma addr = 0x74000000, buf[0xb30c8380]
[ 1.076000] nxp-fb.0: dma addr = 0x74384000, buf[0xb30c8540]
[ 1.136000] hdmi_stop entered
[ 1.140000] hdmi_run entered
[ 1.152000] HDMI PHY Ready!!!
[ 1.156000] Display.0 fps=161 (6 ms), wait= 4 jiffies, Pixelclk=200000000hz
[ 1.164000] _calc_hdmi_sync_param: _h_sync_offset 0
[ 1.192000] hdmi_run exit
[ 1.192000] nxp-fb 0: out[0], 1280 * 720 - 32 bpp (phys:74000000 virt:0xb4000000 max:7372800)
[ 1.208000] uart-pl011 uart-pl011.0: no DMA platform data
[ 1.212000] uart-pl011 uart-pl011.1: no DMA platform data
[ 1.216000] uart-pl011 uart-pl011.3: no DMA platform data
[ 1.224000] uart-pl011 uart-pl011.4: no DMA platform data
[ 1.232000] loop: module loaded
[ 1.232000] tun: Universal TUN/TAP device driver, 1.6
[ 1.240000] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 1.244000] PPP generic driver version 2.4.2
[ 1.248000] PPP BSD Compression module registered
[ 1.252000] PPP Deflate Compression module registered
[ 1.260000] PPP MPPE Compression module registered
[ 1.264000] NET: Registered protocol family 24
[ 1.268000] usbcore: registered new interface driver asix
[ 1.276000] usbcore: registered new interface driver cdc_ether
[ 1.280000] usbcore: registered new interface driver net1080
[ 1.284000] usbcore: registered new interface driver cdc_subset
[ 1.292000] usbcore: registered new interface driver zaurus
[ 1.296000] usbcore: registered new interface driver cdc_ncm
[ 1.304000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.308000] nxp-ehci nxp-ehci: SLsi Synopsys EHCI Host Controller
[ 1.316000] nxp-ehci nxp-ehci: new USB bus registered, assigned bus number 1
[ 1.324000] nxp-ehci nxp-ehci: irq 50, io mem 0xc0030000
[ 1.340000] nxp-ehci nxp-ehci: USB 0.0 started, EHCI 1.00
[ 1.344000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.352000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.356000] usb usb1: Product: SLsi Synopsys EHCI Host Controller
[ 1.364000] usb usb1: Manufacturer: Linux 3.4.39-FriendlyARM ehci_hcd
[ 1.372000] usb usb1: SerialNumber: nxp-ehci
[ 1.376000] hub 1-0:1.0: USB hub found
[ 1.380000] hub 1-0:1.0: 3 ports detected
[ 1.384000] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.460000] HDMI HPD State 0x1
[ 1.460000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.468000] i2c.1 addr 0xa0 (try:1)
[ 1.472000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.476000] i2c.1 addr 0xa0 (try:1)
[ 1.480000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.488000] i2c.1 addr 0xa0 (try:2)
[ 1.492000] Error: i2c.1, addr:60, trans len:-11(128), try:2
[ 1.496000] Fail, noack i2c.1 addr [0xa0] data[0x00], trans[ 1: 1]
[ 1.504000] i2c.1 addr 0xa0 (try:1)
[ 1.508000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.512000] i2c.1 addr 0xa0 (try:2)
[ 1.516000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 1.524000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.528000] i2c.1 addr 0xa0 (try:1)
[ 1.532000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.540000] i2c.1 addr 0xa0 (try:2)
[ 1.544000] Error: i2c.1, addr:60, trans len:-11(128), try:2
[ 1.580000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.584000] i2c.1 addr 0xa0 (try:1)
[ 1.588000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.588000] Core Release: 2.93a
[ 1.588000] Setting default values for core params
[ 1.588000] Finished setting default values for core params
[ 1.608000] i2c.1 addr 0xa0 (try:2)
[ 1.612000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 1.616000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.624000] i2c.1 addr 0xa0 (try:1)
[ 1.628000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.632000] i2c.1 addr 0xa0 (try:2)
[ 1.636000] Error: i2c.1, addr:60, trans len:-11(128), try:2
[ 1.644000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.648000] i2c.1 addr 0xa0 (try:1)
[ 1.652000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.660000] i2c.1 addr 0xa0 (try:2)
[ 1.664000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 1.700000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.704000] i2c.1 addr 0xa0 (try:1)
[ 1.708000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.716000] i2c.1 addr 0xa0 (try:1)
[ 1.720000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.724000] i2c.1 addr 0xa0 (try:2)
[ 1.728000] Error: i2c.1, addr:60, trans len:-11(128), try:2
[ 1.736000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.740000] i2c.1 addr 0xa0 (try:1)
[ 1.744000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.752000] i2c.1 addr 0xa0 (try:2)
[ 1.752000] Error: i2c.1, addr:60, trans len:-11(128), try:2
[ 1.760000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.768000] i2c.1 addr 0xa0 (try:1)
[ 1.768000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.776000] i2c.1 addr 0xa0 (try:2)
[ 1.780000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 1.788000] Using Descriptor DMA mode
[ 1.792000] Dedicated Tx FIFOs mode
[ 1.796000] dwc_otg dwc_otg: DWC OTG Controller
[ 1.800000] dwc_otg dwc_otg: new USB bus registered, assigned bus number 2
[ 1.808000] dwc_otg dwc_otg: irq 49, io mem 0x00000000
[ 1.812000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.816000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.816000] i2c.1 addr 0xa0 (try:1)
[ 1.816000] Fail, noack i2c.1 addr [0xa0] data[0x00], trans[ 1: 1]
[ 1.816000] i2c.1 addr 0xa0 (try:2)
[ 1.816000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 1.816000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.816000] i2c.1 addr 0xa0 (try:1)
[ 1.816000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.816000] i2c.1 addr 0xa0 (try:2)
[ 1.816000] Error: i2c.1, addr:60, trans len:-11(128), try:2
[ 1.816000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.816000] i2c.1 addr 0xa0 (try:1)
[ 1.816000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.816000] i2c.1 addr 0xa0 (try:2)
[ 1.816000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 1.848000] Fail, noack i2c.1 addr [0xa0] data[0x00], trans[ 1: 1]
[ 1.848000] i2c.1 addr 0xa0 (try:1)
[ 1.848000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.848000] i2c.1 addr 0xa0 (try:2)
[ 1.848000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 1.848000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.848000] i2c.1 addr 0xa0 (try:1)
[ 1.848000] Fail, noack i2c.1 addr [0xa0] data[0xa1], trans[ 0:128]
[ 1.848000] i2c.1 addr 0xa0 (try:2)
[ 1.848000] Error: i2c.1, addr:60, trans len:-11(128), try:2
[ 1.848000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.848000] i2c.1 addr 0xa0 (try:1)
[ 1.848000] Fail, noack i2c.1 addr [0xa0] data[0xa0], trans[ 0: 1]
[ 1.848000] i2c.1 addr 0xa0 (try:2)
[ 1.848000] Error: i2c.1, addr:60, trans len:-11(1), try:2
[ 1.880000] _edid_i2c_read: can't read data, timeout
[ 1.880000] _edid_read_block: failed to _edid_i2c_read ret -62
[ 1.880000] _hdmi_hpd_changed: failed to edid update(), use static information
[ 1.880000] notify_hpd_changed: state 1
[ 1.880000] hdmi_run entered
[ 1.880000] hdmi_run: hdmi already running!
[ 1.996000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.004000] usb usb2: Product: DWC OTG Controller
[ 2.008000] usb usb2: Manufacturer: Linux 3.4.39-FriendlyARM dwc_otg_hcd
[ 2.016000] usb usb2: SerialNumber: dwc_otg
[ 2.020000] hub 2-0:1.0: USB hub found
[ 2.024000] hub 2-0:1.0: 1 port detected
[ 2.028000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.036000] nxp-ohci nxp-ohci: SLsi Synopsys OHCI Host Controller
[ 2.040000] nxp-ohci nxp-ohci: new USB bus registered, assigned bus number 3
[ 2.048000] nxp-ohci nxp-ohci: irq 50, io mem 0xc0020000
[ 2.112000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.116000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.124000] usb usb3: Product: SLsi Synopsys OHCI Host Controller
[ 2.132000] usb usb3: Manufacturer: Linux 3.4.39-FriendlyARM ohci_hcd
[ 2.136000] usb usb3: SerialNumber: nxp-ohci
[ 2.140000] hub 3-0:1.0: USB hub found
[ 2.144000] hub 3-0:1.0: 3 ports detected
[ 2.148000] Initializing USB Mass Storage driver...
[ 2.156000] usbcore: registered new interface driver usb-storage
[ 2.160000] USB Mass Storage support registered.
[ 2.164000] g_ether gadget: using random self ethernet address
[ 2.172000] usb0: MAC 6e:f2:6b:bc:1e:b4
[ 2.176000] usb0: HOST MAC 82:cf:ce:fa:44:18
[ 2.180000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 2.184000] g_ether gadget: g_ether ready
[ 2.188000] mousedev: PS/2 mouse device common for all mice
[ 2.196000] input: Nexell Keypad as /devices/platform/nxp-keypad/input/input0
[ 2.204000] usbcore: registered new interface driver xpad
[ 2.208000] touchscreen-1wire initialized
[ 2.212000] backlight-1wire initialized
[ 2.216000] input: fa_ts_input as /devices/virtual/input/input1
[ 2.224000] ts-if initialized
[ 2.224000] [RTC] day=2009.09.01 time=00:00:00
[ 2.232000] nxp-rtc nxp-rtc.0: rtc core: registered nxp-rtc as rtc0
[ 2.236000] i2c /dev entries driver
[ 2.240000] gspca_main: v2.14.0 registered
[ 2.248000] usbcore: registered new interface driver uvcvideo
[ 2.252000] USB Video Class driver (1.1.1)
[ 2.256000] device-mapper: uevent: version 1.0.3
[ 2.264000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-devel@redhat.com[ 2.272000] Bluetooth: HCI UART driver ver 2.2
[ 2.276000] Bluetooth: HCI H4 protocol initialized
[ 2.280000] DVFS: ASV[0] IDS(10mA, 5) Ro(110, 61)
[ 2.284000] ASV 0 = 1400000khz, 1350000 uV
[ 2.288000] ASV 1 = 1200000khz, 1250000 uV
[ 2.292000] ASV 2 = 1000000khz, 1175000 uV
[ 2.300000] ASV 3 = 800000khz, 1125000 uV
[ 2.304000] ASV 4 = 700000khz, 1100000 uV
[ 2.308000] ASV 5 = 600000khz, 1075000 uV
[ 2.312000] ASV 6 = 500000khz, 1075000 uV
[ 2.316000] ASV 7 = 400000khz, 1075000 uV
[ 2.320000] DVFS: regulator vdd_arm_1.3V
[ 2.324000] DVFS: cpu DVFS with PLL.1 [tables=8]
[ 2.328000] cpuidle: using governor ladder
[ 2.336000] cpuidle: using governor menu
[ 2.336000] Synopsys Designware Multimedia Card Interface Driver
[ 2.344000] dw_mmc dw_mmc.0: Using internal DMA controller.
[ 2.352000] mmc0: no vmmc regulator found
[ 2.356000] dw_mmc dw_mmc.0: Using external card detect irq 225 (io 161)
[ 2.364000] dw_mmc dw_mmc.0: Version ID is 250a
[ 2.368000] dw_mmc dw_mmc.0: DW MMC controller at irq 43, 32 bit host data width, 32 deep fifo hw timeout 500 ms
[ 2.376000] dw_mmc dw_mmc.1: Using PIO mode.
[ 2.380000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.392000] mmc1: no vmmc regulator found
[ 2.396000] dw_mmc dw_mmc.1: Version ID is 250a
[ 2.400000] dw_mmc dw_mmc.1: DW MMC controller at irq 44, 32 bit host data width, 32 deep fifo hw timeout 500 ms
[ 2.412000] dw_mmc dw_mmc.2: Using internal DMA controller.
[ 2.416000] mmc2: no vmmc regulator found
[ 2.420000] dw_mmc dw_mmc.2: Using external card detect irq 152 (io 88)
[ 2.428000] dw_mmc dw_mmc.2: Version ID is 250a
[ 2.432000] dw_mmc dw_mmc.2: DW MMC controller at irq 45, 32 bit host data width, 32 deep fifo hw timeout 500 ms
[ 2.444000] usbcore: registered new interface driver usbhid
[ 2.448000] usbhid: USB HID core driver
[ 2.452000] ADC: CHs 8, 200000(1000000 ~ 130208) sample rate, polling mode, scale=166(bit 6)
[ 2.464000] snd pcm: register sound platform 'nxp-pcm'
[ 2.468000] snd i2s: ch 0, master, iis mode, 48000(47999)hz, 32 FBITs, MCLK=12287980hz, RFS=256
[ 2.468000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 2.468000] mmc0: new high speed SDHC card at address aaaa
[ 2.468000] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 2.472000] mmcblk0: p1 p2
[ 2.488000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.508000] spdif-tx: 48000(47348)Hz, MCLK=12121212hz HDMI out
[ 2.516000] asoc: dit-hifi <-> nxp-spdif-tx mapping ok
[ 2.524000] GACT probability NOT on
[ 2.528000] Mirror/redirect action on
[ 2.528000] u32 classifier
[ 2.532000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
[ 2.540000] Actions configured
[ 2.544000] Netfilter messages via NETLINK v0.30.
[ 2.552000] nf_conntrack version 0.5.0 (12966 buckets, 51864 max)
[ 2.556000] ctnetlink v0.93: registering with nfnetlink.
[ 2.560000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.568000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.576000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
[ 2.584000] xt_time: kernel timezone is -0000
[ 2.588000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.596000] arp_tables: (C) 2002 David S. Miller
[ 2.600000] TCP: cubic registered
[ 2.604000] Initializing XFRM netlink socket
[ 2.608000] NET: Registered protocol family 10
[ 2.612000] Mobile IPv6
[ 2.616000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.620000] IPv6 over IPv4 tunneling driver
[ 2.624000] NET: Registered protocol family 17
[ 2.628000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250)
[ 2.640000] NET: Registered protocol family 15
[ 2.644000] Bluetooth: RFCOMM TTY layer initialized
[ 2.648000] Bluetooth: RFCOMM socket layer initialized
[ 2.652000] Bluetooth: RFCOMM ver 1.11
[ 2.656000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.664000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.668000] NET: Registered protocol family 35
[ 2.672000] Registering the dns_resolver key type
[ 2.676000] Registering SWP/SWPB emulation handler
[ 2.684000] otg_wakelock_init: No USB transceiver found
[ 2.688000] nxp-rtc nxp-rtc.0: setting system clock to 2009-09-01 00:00:01 UTC (1251763201)
[ 2.696000] ALSA device list:
[ 2.700000] #0: SPDIF-Transciever
[ 2.716000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.724000] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.728000] Freeing init memory: 224K
[ 2.732000] Write protecting the kernel text section 80008000 - 807ed000
[ 2.740000] rodata_test: attempting to write to read-only section:
[ 2.748000] write to read-only section trapped, success
[ 3.108000] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 3.120000] systemd[1]: Detected architecture 'arm'.
[ 3.128000] systemd[1]: Set hostname to <NanoPi2>.
[ 3.216000] Unable to handle kernel NULL pointer dereference at virtual address 0000019b
[ 3.224000] pgd = 80004000
[ 3.224000] [0000019b] *pgd=00000000
[ 3.228000] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
[ 3.228000] Modules linked in:
[ 3.228000] CPU: 3 Not tainted (3.4.39-FriendlyARM #133)
[ 3.228000] PC is at __rcu_read_lock+0x10/0x20
[ 3.228000] LR is at page_remove_rmap+0x94/0x110
[ 3.228000] pc : [<800be2e0>] lr : [<8010c2d4>] psr: 600f0013
[ 3.228000] sp : b3331e10 ip : 00073ff7 fp : 00000000
[ 3.228000] r10: 76eba000 r9 : 76f88000 r8 : b3331ec8
[ 3.228000] r7 : 810eea58 r6 : 00000000 r5 : b3aa02e8 r4 : 810eea58
[ 3.228000] r3 : b3230000 r2 : ffffffff r1 : b358cdc8 r0 : 810eea58
[ 3.228000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 3.228000] Control: 10c5387d Table: 7333c04a DAC: 00000015
[ 3.228000]
[ 3.228000] PC: 0x800be260:
[ 3.228000] e260 f57ff05f e1921f9f e2811000 e182cf91 e33c0000 1afffffa f57ff05f e2013001
[ 3.228000] e280 e5801050 e2230001 e12fff1e e30a3b4c e3a02001 e3483086 e3a00000 e5832000
[ 3.228000] e2a0 e12fff1e f57ff05f e3a00000 e12fff1e e3013200 e3483088 e59302c8 e12fff1e
[ 3.228000] e2c0 e3013200 e3483088 e59302c8 e12fff1e e1a0300d e3c33d7f e3c3303f e593200c
[ 3.228000] e2e0 e592319c e2833001 e582319c e12fff1e e590304c e1a02000 e283100c f57ff05f
[ 3.228000] e300 e1910f9f e2800000 e181cf90 e33c0000 1afffffa f57ff05f e3100001 e5921050
[ 3.228000] e320 0a000004 e30f3ffe e34f3fff e0613003 e1730000 4a000004 e5923054 e3a00001
[ 3.228000] e340 e0833000 e5823054 e12fff1e e5923080 e3051490 e348105f e5911000 e3530000
[ 3.228000]
[ 3.228000] LR: 0x8010c254:
[ 3.228000] c254 e2116001 1a000004 e30b3100 e3483086 e5933038 e3530000 0a000017 e284300c
[ 3.228000] c274 f57ff05f e3e05000 e1932f9f e0822005 e1831f92 e3310000 1afffffa f57ff05f
[ 3.228000] c294 e3520000 ba000018 e3560000 1a000008 e30b3100 e3483086 e5933038 e3530000
[ 3.228000] c2b4 1a000003 e5dd3003 e3530000 1a00001e ebfecdfc e28dd008 e8bd8070 ebfec7fe
[ 3.228000] c2d4 e30b30f8 e5cd6003 e3483086 e5933000 e3530000 0affffe0 e1a00004 e28d1003
[ 3.228000] c2f4 e28d2004 eb005b0b eaffffdb e3560000 e1a00004 0a000005 eb005c02 e1a00004
[ 3.228000] c314 e3a01007 ebffc57b e28dd008 e8bd8070 e3a01008 ebffc577 e1a00004 e1a01006
[ 3.228000] c334 e1a02005 eb005b2e eaffffd8 e1a00004 e28d1004 eb005b22 eaffffdc e92d4ff0
[ 3.228000]
[ 3.228000] SP: 0xb3331d90:
[ 3.228000] 1d90 c4ec4ec5 80853038 00000000 00020200 00000000 00000063 b3aa018c 80978fc0
[ 3.228000] 1db0 800be2e0 600f0013 ffffffff b3331dfc b3331ec8 8000e8d8 810eea58 b358cdc8
[ 3.228000] 1dd0 ffffffff b3230000 810eea58 b3aa02e8 00000000 810eea58 b3331ec8 76f88000
[ 3.228000] 1df0 76eba000 00000000 00073ff7 b3331e10 8010c2d4 800be2e0 600f0013 ffffffff
[ 3.228000] 1e10 00000000 b3aa02b8 b3aa02ec b3aa02e8 b329b790 80103824 ffffffff b333ddbc
[ 3.228000] 1e30 00000000 73f6659f 80978fc0 80871c9c b32c21c0 810e3e9c 76f88000 b3330000
[ 3.228000] 1e50 b333ddb8 76f87fff b3331e6c fffffff4 00000000 00000000 00000000 b329b790
[ 3.228000] 1e70 ffffffff b3331ec8 00000000 b3331ec4 00000000 b3330008 00000000 801044d8
[ 3.228000]
[ 3.228000] R0: 0x810ee9d8:
[ 3.228000] e9d8 00000003 810ee9b8 810eea6c 00000000 00000000 00080068 b3a9c031 000000d9
[ 3.228000] e9f8 00000001 00000002 809b26d4 810eb8a4 00000000 00000000 00020228 b35968f0
[ 3.228000] ea18 00000008 ffffffff 00000001 810e77f4 810eb0e8 00000000 00000000 00080068
[ 3.228000] ea38 b38ec091 00076ff0 00000001 00000002 809d11e4 810ef00c 00000000 00000000
[ 3.228000] ea58 0002026c b358cdc8 0000000b 00000001 00000003 810ee9dc 810eea90 00000000
[ 3.228000] ea78 00000000 0002026c b358cdc8 0000000c 00000001 00000003 810eea6c 810eeab4
[ 3.228000] ea98 00000000 00000000 0002026c b358cdc8 0000000d 00000001 00000003 810eea90
[ 3.228000] eab8 810eead8 00000000 00000000 0002026c b358cdc8 0000000e 00000001 00000003
[ 3.228000]
[ 3.228000] R1: 0xb358cd48:
[ 3.228000] cd48 000006e8 00000000 000dc6dc 00000000 00000000 00000000 00000001 00000000
[ 3.228000] cd68 00000000 b358cd6c b358cd6c 00000000 00000000 00000000 8134fd54 b358cd84
[ 3.228000] cd88 b358cd84 b358cd8c b358cd8c b358cb1c b358d00c b34045cc b34045cc 00000001
[ 3.228000] cda8 0000000c 00000000 00000000 00000000 00000000 00000000 80602e00 00000000
[ 3.228000] cdc8 b358ccf0 00000002 00000020 b3588e41 01d901d9 00000000 00000000 b3a9a188
[ 3.228000] cde8 00010008 b358cdec b358cdec 00000001 00070007 00000000 b358ce00 b358ce00
[ 3.228000] ce08 00000000 000000dd 00000000 80602f9c 000200da b31d00c0 00000000 00000000
[ 3.228000] ce28 b358ce28 b358ce28 00000000 b358ce34 b358ce34 00000000 00000000 00000000
[ 3.228000]
[ 3.228000] R3: 0xb322ff80:
[ 3.228000] ff80 fffdffff ffffffff fffbdfff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 3.228000] ffa0 ffffffff ffffffff ffdbefff ffffffff afffffff fffeffff ffffffff fffbffff
[ 3.228000] ffc0 ffffffff ffffffff ffdfffff ffffffff fffdffff ffffff7f ffffffff ffffffff
[ 3.228000] ffe0 ffffffff ffffffff ff7fffff ffffffff fffef5ff ffffffff ffffffff ffffffff
[ 3.228000] 0000 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 3.228000] 0020 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 3.228000] 0040 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 3.228000] 0060 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 3.228000]
[ 3.228000] R4: 0x810ee9d8:
[ 3.228000] e9d8 00000003 810ee9b8 810eea6c 00000000 00000000 00080068 b3a9c031 000000d9
[ 3.228000] e9f8 00000001 00000002 809b26d4 810eb8a4 00000000 00000000 00020228 b35968f0
[ 3.228000] ea18 00000008 ffffffff 00000001 810e77f4 810eb0e8 00000000 00000000 00080068
[ 3.228000] ea38 b38ec091 00076ff0 00000001 00000002 809d11e4 810ef00c 00000000 00000000
[ 3.228000] ea58 0002026c b358cdc8 0000000b 00000001 00000003 810ee9dc 810eea90 00000000
[ 3.228000] ea78 00000000 0002026c b358cdc8 0000000c 00000001 00000003 810eea6c 810eeab4
[ 3.228000] ea98 00000000 00000000 0002026c b358cdc8 0000000d 00000001 00000003 810eea90
[ 3.228000] eab8 810eead8 00000000 00000000 0002026c b358cdc8 0000000e 00000001 00000003
[ 3.228000]
[ 3.228000] R5: 0xb3aa0268:
[ 3.228000] 0268 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3.228000] 0288 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3.228000] 02a8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3.228000] 02c8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3.228000] 02e8 00000000 73f6759f 73f6859f 73f6959f 73f6a59f 73f6b59f 73f6c59f 73f6d59f
[ 3.228000] 0308 73f6e59f 73f6f59f 73f7059f 00000000 73f7259f 00000000 00000000 00000000
[ 3.228000] 0328 00000000 00000000 00000000 00000000 00000000 00000000 73e8059f 00000000
[ 3.228000] 0348 00000000 00000000 73e7c59f 00000000 73e7a59f 00000000 00000000 00000000
[ 3.228000]
[ 3.228000] R7: 0x810ee9d8:
[ 3.228000] e9d8 00000003 810ee9b8 810eea6c 00000000 00000000 00080068 b3a9c031 000000d9
[ 3.228000] e9f8 00000001 00000002 809b26d4 810eb8a4 00000000 00000000 00020228 b35968f0
[ 3.228000] ea18 00000008 ffffffff 00000001 810e77f4 810eb0e8 00000000 00000000 00080068
[ 3.228000] ea38 b38ec091 00076ff0 00000001 00000002 809d11e4 810ef00c 00000000 00000000
[ 3.228000] ea58 0002026c b358cdc8 0000000b 00000001 00000003 810ee9dc 810eea90 00000000
[ 3.228000] ea78 00000000 0002026c b358cdc8 0000000c 00000001 00000003 810eea6c 810eeab4
[ 3.228000] ea98 00000000 00000000 0002026c b358cdc8 0000000d 00000001 00000003 810eea90
[ 3.228000] eab8 810eead8 00000000 00000000 0002026c b358cdc8 0000000e 00000001 00000003
[ 3.228000]
[ 3.228000] R8: 0xb3331e48:
[ 3.228000] 1e48 76f88000 b3330000 b333ddb8 76f87fff b3331e6c fffffff4 00000000 00000000
[ 3.228000] 1e68 00000000 b329b790 ffffffff b3331ec8 00000000 b3331ec4 00000000 b3330008
[ 3.228000] 1e88 00000000 801044d8 b3331ec4 00000000 b3331ee8 b3321898 b32c21c0 00000000
[ 3.228000] 1ea8 b3331ee8 00000000 b3330000 80109f84 b3331ec4 00000000 8085672c 0000002a
[ 3.228000] 1ec8 b32c21c0 00000001 00000000 b329b4d0 00000001 0000002c 00000400 b334c000
[ 3.228000] 1ee8 b32c21c0 b31dc600 b32c2200 b3330000 00000000 805f0a1c 00000001 b3330010
[ 3.228000] 1f08 b3331f1c b32c21c0 b31dc600 b31dca1c b32c21fc 800422a8 b32c21c0 80048744
[ 3.228000] 1f28 00000000 805f04dc b31dc600 00000000 b31dc600 b3330000 000000f8 80048a90
[ 3.228000] Process systemd-insserv (pid: 93, stack limit = 0xb33302f0)
[ 3.228000] Stack: (0xb3331e10 to 0xb3332000)
[ 3.228000] 1e00: 00000000 b3aa02b8 b3aa02ec b3aa02e8
[ 3.228000] 1e20: b329b790 80103824 ffffffff b333ddbc 00000000 73f6659f 80978fc0 80871c9c
[ 3.228000] 1e40: b32c21c0 810e3e9c 76f88000 b3330000 b333ddb8 76f87fff b3331e6c fffffff4
[ 3.228000] 1e60: 00000000 00000000 00000000 b329b790 ffffffff b3331ec8 00000000 b3331ec4
[ 3.228000] 1e80: 00000000 b3330008 00000000 801044d8 b3331ec4 00000000 b3331ee8 b3321898
[ 3.228000] 1ea0: b32c21c0 00000000 b3331ee8 00000000 b3330000 80109f84 b3331ec4 00000000
[ 3.228000] 1ec0: 8085672c 0000002a b32c21c0 00000001 00000000 b329b4d0 00000001 0000002c
[ 3.228000] 1ee0: 00000400 b334c000 b32c21c0 b31dc600 b32c2200 b3330000 00000000 805f0a1c
[ 3.228000] 1f00: 00000001 b3330010 b3331f1c b32c21c0 b31dc600 b31dca1c b32c21fc 800422a8
[ 3.228000] 1f20: b32c21c0 80048744 00000000 805f04dc b31dc600 00000000 b31dc600 b3330000
[ 3.228000] 1f40: 000000f8 80048a90 b329bec8 00000001 b32c21fc 00090009 00001000 80282768
[ 3.228000] 1f60: b32c2200 b31e5d40 00000000 b3330000 000000f8 8000eec4 b3330000 00000000
[ 3.228000] 1f80: 00000000 800491bc 00000000 000788b2 000788c6 00000001 000000f8 80049238
[ 3.228000] 1fa0: 00000000 8000ed40 000788b2 000788c6 00000000 76ff46e0 00000008 00000000
[ 3.228000] 1fc0: 000788b2 000788c6 00000001 000000f8 00000000 76f994b8 00000001 00000000
[ 3.228000] 1fe0: 000000f8 7efc7cf4 76f207e3 76ec68e6 600f0030 00000000 73ff8811 73ff8c11
[ 3.228000] [<800be2e0>] (__rcu_read_lock+0x10/0x20) from [<8010c2d4>] (page_remove_rmap+0x94/0x110)
[ 3.228000] [<8010c2d4>] (page_remove_rmap+0x94/0x110) from [<80103824>] (unmap_single_vma+0x36c/0x67c)
[ 3.228000] [<80103824>] (unmap_single_vma+0x36c/0x67c) from [<801044d8>] (unmap_vmas+0x5c/0x70)
[ 3.228000] [<801044d8>] (unmap_vmas+0x5c/0x70) from [<80109f84>] (exit_mmap+0xe4/0x1dc)
[ 3.228000] [<80109f84>] (exit_mmap+0xe4/0x1dc) from [<800422a8>] (mmput+0x58/0x108)
[ 3.228000] [<800422a8>] (mmput+0x58/0x108) from [<80048744>] (exit_mm+0x120/0x138)
[ 3.228000] [<80048744>] (exit_mm+0x120/0x138) from [<80048a90>] (do_exit+0x128/0x7dc)
[ 3.228000] [<80048a90>] (do_exit+0x128/0x7dc) from [<800491bc>] (do_group_exit+0x4c/0xb8)
[ 3.228000] [<800491bc>] (do_group_exit+0x4c/0xb8) from [<80049238>] (__wake_up_parent+0x0/0x18)
[ 3.228000] Code: e1a0300d e3c33d7f e3c3303f e593200c (e592319c)
[ 4.216000] ---[ end trace a86f72640eb3bf21 ]---
[ 4.220000] Fixing recursive fault but reboot is needed!