主板:NanoPi 2
电源:开关电源 5v,max:6A
TF卡:闪迪(SanDisk)至尊高速移动MicroSDHC UHS-I存储卡 TF卡 16GB Class10 读速80Mb/s(
http://item.jd.com/1875996.html)
系统:官方wiki最新版nanopi2-debian-sd4g-wifiap.img [
http://pan.baidu.com/s/1dDE0Gwh?qq-pf-to=pcqq.c2c#path=%252FNanoPi2]
输出串口信息:
--------------------------------------------------------------------------------
Second Boot by Nexell Co. : Built on Nov 19 2014 20:10:38
--------------------------------------------------------------------------------
PLL0: 550000000 PLL1: 1200000000 PLL2: 800000000 PLL3: 612000000
Divider0 PLL: 1 CPU:1200000000 CPU BUS:300000000
Divider1 PLL: 2 BCLK:400000000 PCLK:200000000
Divider2 PLL: 2 MDCLK:800000000 MCLK:800000000
MBCLK:400000000 MPCLK:200000000
Divider3 PLL: 0 G3D BCLK:550000000
Divider4 PLL: 2 MPEG BCLK:400000000 MPEG PCLK:200000000
123
DDR3 POR Init Start
phy init
########## READ/GATE Level ##########
DDR3 Init Done!
Loading from sdmmc...
Image Loading Done!
Launch to 0x42C00000
U-Boot 2014.07-gef5d902 (Dec 15 2015 - 16:08:05)
PLL : [0] = 550000000, [1] = 1200000000, [2] = 800000000, [3] = 614399000
PLL1: CPU FCLK = 1200000000, HCLK = 300000000
PLL2: BUS BCLK = 400000000, PCLK = 200000000
PLL2: MEM MCLK = 800000000, DCLK = 800000000, BCLK = 400000000, PCLK = 200000000
PLL0: G3D BCLK = 550000000
PLL2: MPG BCLK = 400000000, PCLK = 200000000
I2C: ready
DRAM: 256 MiB
Heap = 0x43000000~0x45000000
Code = 0x42c00000~0x42c72984
GLD = 0x42bffeb8
GLBD = 0x42bffe68
SP = 0x42bffe68,0x42bffe50(CURR)
PC = 0x42c06114
TAGS = 0x40000100
PAGE = 0x42c80000~0x42c8c000
MACH = [4330]
VER = 1
BOARD= [nanopi2]
LCD = N/A (-1)
MMC: NXP DWMMC: 0, NXP DWMMC: 1, NXP DWMMC: 2
In: serial
Out: serial
Err: serial
switch to partitions #0, OK
mmc0 is current device
HDMI: display.0, preset 0 (1280 * 720)
HDMI: PHY Ready!!!
DONE: Logo bmp 800 by 480 (3bpp), len=1152056
DRAW: 0x47000000 -> 0x46000000
Hit any key to stop autoboot: 1 0
## Booting kernel from Legacy Image at 48000000 ...
Image Name: Linux-3.4.39-FriendlyARM
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4460296 Bytes = 4.3 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.39-FriendlyARM (root@jensen) (gcc version 4.9.3 (ctng-1.21.0-229g-FA) ) #3 SMP PREEMPT Fri Dec 18 14:46:14 HKT 2015
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: NANOPI2
[ 0.000000] Display: HDMI selected
[ 0.000000] nxp_reserve_mem: reserve CMA: size 201326592
[ 0.000000] NXP/CMA: Reserved 0x74000000/0x0c000000 for 'ion'
[ 0.000000] NXP/CMA: success register cma region for 'ion'
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU : iomap[ 0]: p 0xc0000000 -> v 0xf0000000 len=0x300000
[ 0.000000] CPU : iomap[ 1]: p 0xf0000000 -> v 0xf0300000 len=0x100000
[ 0.000000] CPU : iomap[ 2]: p 0xcf000000 -> v 0xf0400000 len=0x100000
[ 0.000000] CPU : iomap[ 3]: p 0x2c000000 -> v 0xf0500000 len=0x100000
[ 0.000000] CPU : iomap[ 4]: p 0x00000000 -> v 0xf0600000 len=0x100000
[ 0.000000] CPU : DMA Zone Size =16M, CORE 4
[ 0.000000] CPU : VERSION = 2 (0xE153000A), Assign Peripheral Exclusive Bus
[ 0.000000] s5p4418-NanoPi2: Board initialized
[ 0.000000] CPU : Clock Generator= 64 EA, DVFS = support, PLL.1
[ 0.000000] PLL : [0] = 550000000, [1] = 1200000000, [2] = 800000000, [3] = 614399000
[ 0.000000] PLL1: CPU FCLK = 1200000000, HCLK = 300000000
[ 0.000000] PLL2: BUS BCLK = 400000000, PCLK = 200000000
[ 0.000000] PLL2: MEM MCLK = 800000000, DCLK = 800000000, BCLK = 400000000, PCLK = 200000000
[ 0.000000] PLL0: G3D BCLK = 550000000
[ 0.000000] PLL2: MPG BCLK = 400000000, PCLK = 200000000
[ 0.000000] PERCPU: Embedded 8 pages/cpu @81298000 s12288 r8192 d12288 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
[ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 init=/sbin/init systemd.show_status=false g_ether.host_addr=82:cf:ce:fa:44:18 lcd=HDMI720P60
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 829944k/829944k available, 218632k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc0800000 - 0xfee00000 ( 998 MB)
[ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB)
[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
[ 0.000000] .text : 0x80008000 - 0x80810ce4 (8228 kB)
[ 0.000000] .init : 0x80811000 - 0x80848000 ( 220 kB)
[ 0.000000] .data : 0x80848000 - 0x808b7380 ( 445 kB)
[ 0.000000] .bss : 0x808b73a4 - 0x80990b00 ( 870 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:288
[ 0.000000] VIC @f0002000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @f0003000: id 0x00041192, vendor 0x41
[ 0.000000] GPIO @f001a000: start 64, mask 0xffffffff (gpio 53)
[ 0.000000] GPIO @f001b000: start 96, mask 0xffffffff (gpio 54)
[ 0.000000] GPIO @f001c000: start 128, mask 0xffffffff (gpio 55)
[ 0.000000] GPIO @f001d000: start 160, mask 0xffffffff (gpio 56)
[ 0.000000] GPIO @f001e000: start 192, mask 0xffffffff (gpio 57)
[ 0.000000] ALIVE @f0010800: start 224, mask 0x000000ff (alive 4)
[ 0.000000] GIC @f0301000: start 256 (vic 31)
[ 0.000000] timer.0: source, 10000000(HZ:250), mult:3355443200
[ 0.000000] timer.1: event , 10000000(HZ:250), mult:42949673
[ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 4294967292ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 2390.01 BogoMIPS (lpj=4780032)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.036000] Security Framework initialized
[ 0.036000] SELinux: Initializing.
[ 0.036000] Mount-cache hash table entries: 512
[ 0.036000] Initializing cgroup subsys debug
[ 0.036000] Initializing cgroup subsys cpuacct
[ 0.036000] Initializing cgroup subsys memory
[ 0.036000] Initializing cgroup subsys freezer
[ 0.036000] CPU: Testing write buffer coherency: ok
[ 0.036000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[ 0.036000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.036000] Setting up static identity map for 0x405ec2e0 - 0x405ec338
[ 0.036000] L310 cache controller enabled
[ 0.036000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x70470001, Cache size: 1048576 B
[ 0.076000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[ 0.108000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[ 0.140000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[ 0.140000] Brought up 4 CPUs
[ 0.140000] SMP: Total of 4 processors activated (9560.06 BogoMIPS).
[ 0.140000] devtmpfs: initialized
[ 0.144000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.144000] pwm: max = 50000000 hz
[ 0.144000] prepare_gpio_suspend:
[ 0.144000] alfn[0][0]: 0x00000000, alfn[0][1]: 0x00000000
[ 0.144000] alfn[1][0]: 0x66800000, alfn[1][1]: 0x55555566
[ 0.144000] alfn[2][0]: 0x55555555, alfn[2][1]: 0x00555555
[ 0.144000] alfn[3][0]: 0x00000000, alfn[3][1]: 0x00000000
[ 0.144000] alfn[4][0]: 0x00000000, alfn[4][1]: 0x55540000
[ 0.144000] dummy:
[ 0.144000] NET: Registered protocol family 16
[ 0.144000] [Register machine platform devices]
[ 0.144000] mach: add amba device uart-pl011.0
[ 0.144000] mach: add amba device uart-pl011.1
[ 0.144000] mach: add amba device uart-pl011.3
[ 0.144000] mach: add amba device uart-pl011.4
[ 0.144000] mach: add amba device pl08xdmac.0
[ 0.144000] mach: add amba device pl08xdmac.1
[ 0.144000] mach: add amba device ssp-pl022.0
[ 0.148000] mach: add device syncgen [2]
[ 0.148000] mach: add device hdmi
[ 0.148000] mach: add device i2c bus (array:3)
[ 0.148000] mach: add device Real Time Clock
[ 0.148000] mach: add device generic pwm (array:1)
[ 0.148000] mach: add device generic gpio (array:6)
[ 0.148000] mach: add device i2s (array:1)
[ 0.148000] mach: add device spdif tx
[ 0.148000] mach: add device usb_ehci
[ 0.148000] mach: add device usb_ohci
[ 0.148000] mach: add device usb otg
[ 0.148000] mach: add device ion-nxp
[ 0.148000] mach: add device adc
[ 0.148000] mach: add graphic device opengl|es
[ 0.148000] [Register board platform devices]
[ 0.148000] plat: board revision 0
[ 0.148000] plat: add dynamic frequency (pll.1)
[ 0.148000] plat: add framebuffer
[ 0.148000] plat: add device sdmmc [0]
[ 0.152000] plat: add device sdmmc [1]
[ 0.152000] plat: add device sdmmc [2]
[ 0.152000] plat: add backlight pwm device
[ 0.152000] plat: add device keypad
[ 0.152000] plat: add device fixed voltage
[ 0.152000] plat: add device spdif playback
[ 0.152000] plat: add device nxp-v4l2
[ 0.152000] camera_power_control: failed to regulator_get() for vcam1_1.8Vplat: register spidev
[ 0.160000] plat: add touch(ft5x0x) device
[ 0.160000] plat: add device gpio_led
[ 0.160000]
[ 0.160000] hw-breakpoint: Debug register access (0xee113e95) caused undefined instruction on CPU 3
[ 0.160000] hw-breakpoint: Debug register access (0xee113e95) caused undefined instruction on CPU 1
[ 0.160000] hw-breakpoint: Debug register access (0xee113e95) caused undefined instruction on CPU 2
[ 0.160000] hw-breakpoint: CPU 1 debug is powered down!
[ 0.160000] hw-breakpoint: CPU 2 debug is powered down!
[ 0.160000] hw-breakpoint: CPU 3 debug is powered down!
[ 0.160000] hw-breakpoint: Debug register access (0xee113e95) caused undefined instruction on CPU 0
[ 0.160000] hw-breakpoint: CPU 0 debug is powered down!
[ 0.160000] Serial: AMBA PL011 UART driver
[ 0.160000] uart-pl011.0: ttyAMA0 at MMIO 0xc00a1000 (irq = 7) is a PL011 rev3
[ 0.164000] console [ttyAMA0] enabled
[ 0.168000] uart-pl011.1: ttyAMA1 at MMIO 0xc00a0000 (irq = 6) is a PL011 rev3
[ 0.172000] uart-pl011.3: ttyAMA2 at MMIO 0xc00a3000 (irq = 9) is a PL011 rev3
[ 0.176000] uart-pl011.4: ttyAMA3 at MMIO 0xc006d000 (irq = 10) is a PL011 rev3
[ 0.192000] bio: create slab <bio-0> at 0
[ 0.196000] gpiochip_add: registered GPIOs 0 to 31 on device: nxp-gpio.0
[ 0.200000] gpiochip_add: registered GPIOs 32 to 63 on device: nxp-gpio.1
[ 0.204000] gpiochip_add: registered GPIOs 64 to 95 on device: nxp-gpio.2
[ 0.208000] gpiochip_add: registered GPIOs 96 to 127 on device: nxp-gpio.3
[ 0.212000] gpiochip_add: registered GPIOs 128 to 159 on device: nxp-gpio.4
[ 0.216000] gpiochip_add: registered GPIOs 160 to 167 on device: nxp-gpio.5
[ 0.220000] pl08xdmac pl08xdmac.0: Unbalanced pm_runtime_enable!
[ 0.224000] pl08xdmac pl08xdmac.0: initialized 8 virtual memcpy channels
[ 0.228000] pl08xdmac pl08xdmac.0: initialized 16 virtual slave channels
[ 0.232000] pl08xdmac pl08xdmac.0: DMA: PL080 rev1 at 0xc0000000 irq 1
[ 0.236000] pl08xdmac pl08xdmac.1: Unbalanced pm_runtime_enable!
[ 0.240000] pl08xdmac pl08xdmac.1: initialized 8 virtual memcpy channels
[ 0.244000] pl08xdmac pl08xdmac.1: initialized 15 virtual slave channels
[ 0.248000] pl08xdmac pl08xdmac.1: DMA: PL080 rev1 at 0xc0001000 irq 2
[ 0.252000] fixed_vdds: 1350 mV
[ 0.252000] nxp_ion_probe success!!!
[ 0.256000] SCSI subsystem initialized
[ 0.260000] ssp-pl022 ssp-pl022.0: ARM PL022 driver, device ID: 0x00041022
[ 0.264000] pl022: mapped registers from 0xc005b000 to f005b000
[ 0.268000] ssp-pl022 ssp-pl022.0: setup for DMA on RX dma1chan7, TX dma1chan6
[ 0.272000] ssp-pl022 ssp-pl022.0: will use autosuspend for runtime pm, delay 10ms
[ 0.276000] usbcore: registered new interface driver usbfs
[ 0.280000] usbcore: registered new interface driver hub
[ 0.284000] usbcore: registered new device driver usb
[ 0.292000] nxp-i2c.0: 390625 hz [pclk=200000000, clk = 256, scale= 1, timeout= 500 ms]
[ 0.296000] nxp-i2c.1: 97656 hz [pclk=200000000, clk = 256, scale= 7, timeout= 500 ms]
[ 0.300000] nxp-i2c.2: 195312 hz [pclk=200000000, clk = 256, scale= 3, timeout= 500 ms]
[ 0.304000] Linux media interface: v0.10
[ 0.308000] Linux video capture interface: v2.00
[ 0.312000] pps_core: LinuxPPS API ver. 1 registered
[ 0.316000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 0.320000] PTP clock support registered
[ 0.324000] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.328000] Bluetooth: Core ver 2.16
[ 0.332000] NET: Registered protocol family 31
[ 0.336000] Bluetooth: HCI device and connection manager initialized
[ 0.340000] Bluetooth: HCI socket layer initialized
[ 0.348000] Bluetooth: L2CAP socket layer initialized
[ 0.352000] Bluetooth: SCO socket layer initialized
[ 0.356000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.356000] Switching to clocksource source timer
[ 0.376000] NET: Registered protocol family 2
[ 0.380000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.388000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.396000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.404000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.412000] TCP: reno registered
[ 0.416000] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.428000] NET: Registered protocol family 1
[ 0.432000] RPC: Registered named UNIX socket transport module.
[ 0.440000] RPC: Registered udp transport module.
[ 0.444000] RPC: Registered tcp transport module.
[ 0.448000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.456000] Disply Reset Status : On
[ 0.460000] Display HDMI register operation
[ 0.464000] Display.0 fps=161 (6 ms), wait= 4 jiffies, Pixelclk=200000000hz
[ 0.472000] bt_bcm: rfkill initialized
[ 0.476000] audit: initializing netlink socket (disabled)
[ 0.480000] type=2000 audit(0.480:1): initialized
[ 0.492000] NFS: Registering the id_resolver key type
[ 0.496000] fuse init (API version 7.18)
[ 0.500000] msgmni has been set to 1620
[ 0.504000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.512000] io scheduler noop registered
[ 0.516000] io scheduler deadline registered
[ 0.520000] io scheduler cfq registered (default)
[ 0.524000] display.0 connected to fb.0 ...
[ 0.528000] nxp-fb.0: dma addr = 0x74000000, buf[0xb3105300]
[ 0.536000] nxp-fb.0: dma addr = 0x74384000, buf[0xb31054c0]
[ 0.596000] hdmi_stop entered
[ 0.600000] nxp-fb 0: out[0], 1280 * 720 - 32 bpp (phys:74000000 virt:0xb4000000 max:7372800)
[ 0.612000] uart-pl011 uart-pl011.0: no DMA platform data
[ 0.620000] uart-pl011 uart-pl011.1: no DMA platform data
[ 0.624000] uart-pl011 uart-pl011.3: no DMA platform data
[ 0.632000] uart-pl011 uart-pl011.4: no DMA platform data
[ 0.636000] loop: module loaded
[ 0.640000] tun: Universal TUN/TAP device driver, 1.6
[ 0.648000] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 0.652000] PPP generic driver version 2.4.2
[ 0.656000] PPP BSD Compression module registered
[ 0.660000] PPP Deflate Compression module registered
[ 0.668000] PPP MPPE Compression module registered
[ 0.672000] NET: Registered protocol family 24
[ 0.676000] usbcore: registered new interface driver asix
[ 0.680000] usbcore: registered new interface driver cdc_ether
[ 0.688000] usbcore: registered new interface driver net1080
[ 0.692000] usbcore: registered new interface driver cdc_subset
[ 0.700000] usbcore: registered new interface driver zaurus
[ 0.704000] usbcore: registered new interface driver cdc_ncm
[ 0.712000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.716000] nxp-ehci nxp-ehci: SLsi Synopsys EHCI Host Controller
[ 0.724000] nxp-ehci nxp-ehci: new USB bus registered, assigned bus number 1
[ 0.732000] nxp-ehci nxp-ehci: irq 50, io mem 0xc0030000
[ 0.748000] nxp-ehci nxp-ehci: USB 0.0 started, EHCI 1.00
[ 0.752000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.760000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.764000] usb usb1: Product: SLsi Synopsys EHCI Host Controller
[ 0.772000] usb usb1: Manufacturer: Linux 3.4.39-FriendlyARM ehci_hcd
[ 0.780000] usb usb1: SerialNumber: nxp-ehci
[ 0.784000] hub 1-0:1.0: USB hub found
[ 0.788000] hub 1-0:1.0: 3 ports detected
[ 0.792000] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.996000] Core Release: 2.93a
[ 1.000000] Setting default values for core params
[ 1.004000] Finished setting default values for core params
[ 1.208000] Using Descriptor DMA mode
[ 1.212000] Dedicated Tx FIFOs mode
[ 1.216000] dwc_otg dwc_otg: DWC OTG Controller
[ 1.220000] dwc_otg dwc_otg: new USB bus registered, assigned bus number 2
[ 1.228000] dwc_otg dwc_otg: irq 49, io mem 0x00000000
[ 1.232000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.240000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.248000] usb usb2: Product: DWC OTG Controller
[ 1.252000] usb usb2: Manufacturer: Linux 3.4.39-FriendlyARM dwc_otg_hcd
[ 1.260000] usb usb2: SerialNumber: dwc_otg
[ 1.264000] hub 2-0:1.0: USB hub found
[ 1.268000] hub 2-0:1.0: 1 port detected
[ 1.272000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.276000] nxp-ohci nxp-ohci: SLsi Synopsys OHCI Host Controller
[ 1.284000] nxp-ohci nxp-ohci: new USB bus registered, assigned bus number 3
[ 1.292000] nxp-ohci nxp-ohci: irq 50, io mem 0xc0020000
[ 1.356000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.360000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.368000] usb usb3: Product: SLsi Synopsys OHCI Host Controller
[ 1.376000] usb usb3: Manufacturer: Linux 3.4.39-FriendlyARM ohci_hcd
[ 1.380000] usb usb3: SerialNumber: nxp-ohci
[ 1.384000] hub 3-0:1.0: USB hub found
[ 1.388000] hub 3-0:1.0: 3 ports detected
[ 1.392000] Initializing USB Mass Storage driver...
[ 1.400000] usbcore: registered new interface driver usb-storage
[ 1.404000] USB Mass Storage support registered.
[ 1.408000] g_ether gadget: using random self ethernet address
[ 1.416000] usb0: MAC 6a:0e:05:a5:f4:a6
[ 1.420000] usb0: HOST MAC 82:cf:ce:fa:44:18
[ 1.424000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 1.428000] g_ether gadget: g_ether ready
[ 1.432000] mousedev: PS/2 mouse device common for all mice
[ 1.440000] input: Nexell Keypad as /devices/platform/nxp-keypad/input/input0
[ 1.448000] usbcore: registered new interface driver xpad
[ 1.452000] input: ft5x0x_ts as /devices/virtual/input/input1
[ 1.460000] HDMI HPD State 0x0
[ 1.468000] Fail, noack i2c.2 addr [0x70] data[0x70], trans[ 0: 1]
[ 1.472000] i2c.2 addr 0x70 (try:1)
[ 1.476000] Fail, noack i2c.2 addr [0x70] data[0x70], trans[ 0: 1]
[ 1.484000] i2c.2 addr 0x70 (try:2)
[ 1.484000] Error: i2c.2, addr:70, trans len:-11(1), try:2
[ 1.492000] Fail, noack i2c.2 addr [0x70] data[0x70], trans[ 0: 1]
[ 1.496000] i2c.2 addr 0x70 (try:1)
[ 1.500000] Fail, noack i2c.2 addr [0x70] data[0x70], trans[ 0: 1]
[ 1.508000] i2c.2 addr 0x70 (try:2)
[ 1.512000] Error: i2c.2, addr:70, trans len:-11(1), try:2
[ 1.516000] Fail, noack i2c.2 addr [0x70] data[0x70], trans[ 0: 1]
[ 1.524000] i2c.2 addr 0x70 (try:1)
[ 1.524000] Fail, noack i2c.2 addr [0x70] data[0x70], trans[ 0: 1]
[ 1.532000] i2c.2 addr 0x70 (try:2)
[ 1.536000] Error: i2c.2, addr:70, trans len:-11(1), try:2
[ 1.540000] read reg (0xa6) error, -11
[ 1.544000] ft5x0x_ts 2-0038: chip not found
[ 1.588000] ft5x0x_ts 2-0038: probe ft5x0x TouchScreen failed, -11
[ 1.592000] ft5x0x_ts: probe of 2-0038 failed with error -11
[ 1.600000] [RTC] day=2009.09.01 time=00:00:00
[ 1.604000] nxp-rtc nxp-rtc.0: rtc core: registered nxp-rtc as rtc0
[ 1.608000] i2c /dev entries driver
[ 1.612000] gspca_main: v2.14.0 registered
[ 1.620000] usbcore: registered new interface driver uvcvideo
[ 1.624000] USB Video Class driver (1.1.1)
[ 1.628000] device-mapper: uevent: version 1.0.3
[ 1.636000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-devel@redhat.com[ 1.644000] Bluetooth: HCI UART driver ver 2.2
[ 1.648000] Bluetooth: HCI H4 protocol initialized
[ 1.652000] DVFS: ASV[0] IDS(10mA, 5) Ro(110, 61)
[ 1.656000] ASV 0 = 1400000khz, 1350000 uV
[ 1.660000] ASV 1 = 1200000khz, 1250000 uV
[ 1.664000] ASV 2 = 1000000khz, 1175000 uV
[ 1.672000] ASV 3 = 800000khz, 1125000 uV
[ 1.676000] ASV 4 = 700000khz, 1100000 uV
[ 1.680000] ASV 5 = 600000khz, 1075000 uV
[ 1.684000] ASV 6 = 500000khz, 1075000 uV
[ 1.688000] ASV 7 = 400000khz, 1075000 uV
[ 1.692000] DVFS: regulator vdd_arm_1.3V
[ 1.696000] DVFS: cpu DVFS with PLL.1 [tables=8]
[ 1.700000] cpuidle: using governor ladder
[ 1.708000] cpuidle: using governor menu
[ 1.712000] Synopsys Designware Multimedia Card Interface Driver
[ 1.716000] dw_mmc dw_mmc.0: Using internal DMA controller.
[ 1.724000] mmc0: no vmmc regulator found
[ 1.728000] dw_mmc dw_mmc.0: Using external card detect irq 225 (io 161)
[ 1.736000] dw_mmc dw_mmc.0: Version ID is 250a
[ 1.740000] dw_mmc dw_mmc.0: DW MMC controller at irq 43, 32 bit host data width, 32 deep fifo hw timeout 500 ms
[ 1.748000] dw_mmc dw_mmc.1: Using PIO mode.
[ 1.752000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 1.764000] mmc1: no vmmc regulator found
[ 1.768000] dw_mmc dw_mmc.1: Version ID is 250a
[ 1.772000] dw_mmc dw_mmc.1: DW MMC controller at irq 44, 32 bit host data width, 32 deep fifo hw timeout 500 ms
[ 1.784000] dw_mmc dw_mmc.2: Using internal DMA controller.
[ 1.788000] mmc2: no vmmc regulator found
[ 1.792000] dw_mmc dw_mmc.2: Using external card detect irq 152 (io 88)
[ 1.800000] dw_mmc dw_mmc.2: Version ID is 250a
[ 1.804000] dw_mmc dw_mmc.2: DW MMC controller at irq 45, 32 bit host data width, 32 deep fifo hw timeout 500 ms
[ 1.816000] usbcore: registered new interface driver usbhid
[ 1.820000] usbhid: USB HID core driver
[ 1.824000] ADC: CHs 8, 200000(1000000 ~ 130208) sample rate, polling mode, scale=166(bit 6)
[ 1.836000] snd pcm: register sound platform 'nxp-pcm'
[ 1.840000] snd i2s: ch 0, master, iis mode, 48000(47999)hz, 32 FBITs, MCLK=12287980hz, RFS=256
[ 1.840000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 1.840000] mmc0: new high speed SDHC card at address aaaa
[ 1.844000] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 1.844000] mmcblk0: p1 p2
[ 1.860000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 1.880000] spdif-tx: 48000(47348)Hz, MCLK=12121212hz HDMI out
[ 1.888000] asoc: dit-hifi <-> nxp-spdif-tx mapping ok
[ 1.896000] GACT probability NOT on
[ 1.896000] Mirror/redirect action on
[ 1.900000] u32 classifier
[ 1.904000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
[ 1.912000] Actions configured
[ 1.916000] Netfilter messages via NETLINK v0.30.
[ 1.920000] nf_conntrack version 0.5.0 (12967 buckets, 51868 max)
[ 1.928000] ctnetlink v0.93: registering with nfnetlink.
[ 1.932000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 1.940000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 1.948000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
[ 1.956000] xt_time: kernel timezone is -0000
[ 1.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.968000] arp_tables: (C) 2002 David S. Miller
[ 1.972000] TCP: cubic registered
[ 1.976000] Initializing XFRM netlink socket
[ 1.980000] NET: Registered protocol family 10
[ 1.984000] Mobile IPv6
[ 1.988000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.992000] IPv6 over IPv4 tunneling driver
[ 1.996000] NET: Registered protocol family 17
[ 2.000000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250)
[ 2.012000] NET: Registered protocol family 15
[ 2.016000] Bluetooth: RFCOMM TTY layer initialized
[ 2.020000] Bluetooth: RFCOMM socket layer initialized
[ 2.024000] Bluetooth: RFCOMM ver 1.11
[ 2.028000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.036000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.040000] NET: Registered protocol family 35
[ 2.044000] Registering the dns_resolver key type
[ 2.048000] Registering SWP/SWPB emulation handler
[ 2.056000] otg_wakelock_init: No USB transceiver found
[ 2.060000] nxp-rtc nxp-rtc.0: setting system clock to 2009-09-01 00:00:01 UTC (1251763201)
[ 2.068000] ALSA device list:
[ 2.072000] #0: SPDIF-Transciever
使用官方的其他系统还是无法启动,更换卡、电源均不管用
看到电子发烧友论坛有同学碰到类似问题[
http://bbs.elecfans.com/jishu_535033_1_1.html]