主题 : Tiny6410 刷入ubuntu系统一直失败,求助、求指导。。。。。。。 复制链接 | 浏览器收藏 | 打印
级别: 新手上路
UID: 131639
精华: 0
发帖: 5
金钱: 30 两
威望: 6 点
贡献值: 0 点
综合积分: 10 分
注册时间: 2017-03-27
最后登录: 2017-04-26
楼主  发表于: 2017-04-25 18:05

 Tiny6410 刷入ubuntu系统一直失败,求助、求指导。。。。。。。


Tiny6410 刷入ubuntu系统一直失败,无论是设置从SD运行ubuntu系统,还是在nand flash 运行ubuntu系统,一直失败。。。。。。求助啊。。。。。。。

板子的基本信息
Superboot6410
Ver: 150707
CPU: S3C6410 533MHz
RAM: 256MB
NAND: 256MB(SLC) ID:ECDA1095
Touch Device: 1-wire
LCD Type: S70(Auto)



=================== 从SD卡上运行ubuntu系统信息      =======================
FriendlyARM.ini 文件配置如下:
#LCD-Mode = Yes
#LCD-Type = S70

CheckOneButton=No
Action=Run
OS= Ubuntu

VerifyNandWrite=No

StatusType = Beeper| LED


下面是串口输出的信息:

。。。。。。。。
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
sdhci: Secure Digital Host Controller Interface driver
one_wire_status: 4
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (42333333 Hz)
one_wire_status: 4
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (84666666 Hz)
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa SL16G 14.8 GiB
mmcblk0: p1
AC97: Unable to activate!
AC97: Unable to activate!
AC97: Unable to read!
AC97: Unable to activate!
AC97: Unable to activate!
AC97: Unable to read!
AC97: Unable to activate!
AC97: Unable to activate!
AC97: Unable to read!
Failed to reset WM9713: AC97 link error
wm9713-codec wm9713-codec: asoc: failed to probe CODEC wm9713-codec: -5
asoc: failed to instantiate card MINI6410: -5
ALSA device list:
  No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: one_wire_status: 4
implementor 41 architecture 1 part 20 variant b rev 5
s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 05:29:28 UTC (946704568)
Freeing init memory: 1412K
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
losetup: /dev/loop0: No such file or directory
bio too big device loop0 (2 > 0)
EXT3-fs (loop0): error: unable to read superblock
mount: mounting /dev/loop0 on /r failed: Invalid argument
mount: mounting /sdcard on /r/sdcard failed: No such file or directory
1Wire touchscreen OK
/init: line 103: can't open /r/dev/console: no such file
Kernel panic - not syncing: Attempted to kill init!
[<c0178c44>] (unwind_backtrace+0x0/0xe4) from [<c05159c8>] (panic+0x58/0x174)
[<c05159c8>] (panic+0x58/0x174) from [<c018aeb0>] (do_exit+0x68/0x5e4)
[<c018aeb0>] (do_exit+0x68/0x5e4) from [<c018b6f0>] (do_group_exit+0x90/0xc4)
[<c018b6f0>] (do_group_exit+0x90/0xc4) from [<c018b734>] (sys_exit_group+0x10/0x18)
one_wire_status: 2
[<c018b734>] (sys_exit_group+0x10/0x18) from [<c01735e0>] (ret_fast_syscall+0x0/0x30)
one_wire_status: 4
。。。。。。然后一直死在这里了。。。。。


=================== 从nand flash 上运行ubuntu系统信息      =======================
FriendlyARM.ini 文件配置如下:
#LCD-Mode = Yes
#LCD-Type = S70

CheckOneButton=No
Action=Install
OS= Ubuntu

VerifyNandWrite=No

StatusType = Beeper| LED

下面是串口输出信息:
Superboot6410
Ver: 150707
CPU: S3C6410 533MHz
RAM: 256MB
NAND: 256MB(SLC) ID:ECDA1095
Touch Device: 1-wire
LCD Type: S70(Auto)

Installing OS 'UBUNTU'
Installing bootloader...
file: /images/Superboot-6410.bin: 264 KB(270336 Byte)
Installing bootloader succeed
Installing kernel...
file: /images/Ubuntu/uzImage: 3 MB(3763668 Byte)
Installing kernel succeed
Installing ubifs-image...
file: /images/Ubuntu/rootfs_ubuntu-slc.ubi: 301 MB(316014592 Byte)
Skip block 0x2ee
Skip block 0x67f
Installing ubifs-image failed
。。。。。。。。。。。。这里就失败,LCD屏上显示运行83%就失败了。。。。



我尝试了三个DVD版本的superboot和/images/ubuntu镜像文件,结果都是一样的,都在相同的位置出错了。。
tiny6410-DVD-20151113
tiny6410-DVD-20150518
tiny6410-DVD-20141129


求各位指导一下,到底是哪个位置出错了。万分感谢!!!