运行还是出现
Board type: 2
NAND Low-level formating...
NAND Low-level formatted...
Running OS 'LINUX'
Loading kernel...
file: /images/Linux/zImage: 4 MB(4293336 Byte)
Load kernel succeed
Start Linux kernel...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.7-FriendlyARM (root@jensen) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #1 PREEMPT Thu Mar 1 17:38:57 HKT 2012
[ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: MINI210
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Normal zone: 1 pages exceeds realsize 0
[ 0.000000] Normal zone: 1 pages exceeds realsize 0
[ 0.000000] MINI210: S70 selected
[ 0.000000] CPU S5PV210/S5PC110 (id 0x43110220)
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
[ 0.000000] S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
[ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
[ 0.000000] sclk_dmc: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000
[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000
[ 0.000000] sclk_spdif: source is sclk_audio (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_g2d: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_mdnie: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x20b6d000
[ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x30204000
[ 0.000000] s5pv210: 25165824 bytes system memory reserved for fimc0 at 0x32604000
[ 0.000000] s5pv210: 10137600 bytes system memory reserved for fimc1 at 0x33e04000
[ 0.000000] s5pv210: 25165824 bytes system memory reserved for fimc2 at 0x347af000
[ 0.000000] s5pv210: 8388608 bytes system memory reserved for jpeg at 0x22f6d000
[ 0.000000] s5pv210: 3072000 bytes system memory reserved for fimd at 0x35faf000
[ 0.000000] s5pv210: 4194304 bytes system memory reserved for texstream at 0x3629d000
[ 0.000000] s5pv210: 5683200 bytes system memory reserved for pmem at 0x2376d000
[ 0.000000] s5pv210: 3379200 bytes system memory reserved for pmem_gpu1 at 0x23cd9000
[ 0.000000] s5pv210: 1536000 bytes system memory reserved for pmem_adsp at 0x24012000
[ 0.000000] s5pv210: 8388608 bytes system memory reserved for g2d at 0x24189000
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttySAC0 root=/dev/nfs nfsroot=192.168.0.77:/opt/FriendlyARM/tiny210/linux/rootfs_qropia_qt4 ip=192.168.0.73:192.168.0.77:192.168.0.77:255.255.255.0:tiny210.arm9.net:eth0:off
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 256MB 256MB = 512MB total
[ 0.000000] Memory: 343544k/343544k available, 180744k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
[ 0.000000] vmalloc : 0xe0800000 - 0xfc000000 ( 440 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc016e000 (1432 kB)
[ 0.000000] .text : 0xc016e000 - 0xc07c0000 (6472 kB)
[ 0.000000] .data : 0xc07c0000 - 0xc0907b40 (1311 kB)
[ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=4
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:393
[ 0.000000] VIC @fd000000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd010000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd020000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd030000: id 0x00041192, vendor 0x41
[ 0.000000] mult[140737]
[ 0.000000] max_delta_ns[2937815369]
[ 0.000000] min_delta_ns[30517]
[ 0.000000] rate[32768]
[ 0.000000] HZ[256]
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttySAC0] enabled
[ 0.496753] Calibrating delay loop... 998.15 BogoMIPS (lpj=1949696)
[ 0.581953] pid_max: default: 32768 minimum: 301
[ 0.582043] Mount-cache hash table entries: 512
[ 0.582348] Initializing cgroup subsys debug
[ 0.582392] Initializing cgroup subsys cpuacct
[ 0.582434] Initializing cgroup subsys freezer
[ 0.584551] CPU: Testing write buffer coherency: ok
[ 0.591416] regulator: core version 0.5
[ 0.593315] NET: Registered protocol family 16
[ 0.603560] MINI210: S70 selected
[ 0.603598] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.607167] pmstats at 00000000
[ 0.610432] mini210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.617757] mini210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.625204] mini210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.632655] mini210_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.640555] S5PV210: Initializing architecture
[ 0.644840] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
[ 0.652956] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
[ 0.661360] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
[ 0.669849] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
[ 0.678472] regulator: pd_audio_supply: 5000 mV normal
[ 0.683615] regulator: pd_cam_supply: 5000 mV normal
[ 0.688640] regulator: pd_tv_supply: 5000 mV normal
[ 0.693569] regulator: pd_lcd_supply: 5000 mV normal
[ 0.698601] regulator: pd_g3d_supply: 5000 mV normal
[ 0.703631] regulator: pd_mfc_supply: 5000 mV normal
[ 0.716683] bio: create slab <bio-0> at 0
[ 0.717219] SCSI subsystem initialized
[ 0.717393] usbcore: registered new interface driver usbfs
[ 0.721823] usbcore: registered new interface driver hub
[ 0.727098] usbcore: registered new device driver usb
[ 0.732510] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.737611] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.742911] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 0.748485] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.754901] Bluetooth: Core ver 2.15
[ 0.758072] NET: Registered protocol family 31
[ 0.762450] Bluetooth: HCI device and connection manager initialized
[ 0.768776] Bluetooth: HCI socket layer initialized
[ 0.773647] Switching to clocksource clock_source_systimer
[ 0.784645] NET: Registered protocol family 2
[ 0.784856] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.791045] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.797792] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[ 0.804531] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.810636] TCP reno registered
[ 0.813746] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.819668] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.826111] NET: Registered protocol family 1
[ 0.830534] RPC: Registered udp transport module.
[ 0.834989] RPC: Registered tcp transport module.
[ 0.839664] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.856441] PMU: registered new PMU device of type 0
[ 0.856524] SMDKC110/V210 RTC, (c) 2010 Samsung Electronics
[ 0.856614] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[ 0.862756] smdkc110-rtc smdkc110-rtc: rtc core: registered s3c as rtc0
[ 0.869232] cpuidle: phy_regs_save:0x2ff11000
[ 0.873582] Loaded driver for PL330 DMAC-0 s3c-pl330
[ 0.878407] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
[ 0.884540] Loaded driver for PL330 DMAC-1 s3c-pl330
[ 0.889411] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.895553] Loaded driver for PL330 DMAC-2 s3c-pl330
[ 0.900416] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.906512] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.917065] ashmem: initialized
[ 0.917603] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.920433] msgmni has been set to 670
[ 0.926520] alg: No test for stdrng (krng)
[ 0.928192] io scheduler noop registered
[ 0.932076] io scheduler deadline registered
[ 0.936298] io scheduler cfq registered (default)
[ 0.941622] s3cfb s3cfb: [fb2] dma: 0x35faf000, cpu: 0xe0c00000, size: 0x002ee000
[ 0.956601] Console: switching to colour frame buffer device 100x30
[ 0.962092] FIMD src sclk = 166750000
[ 1.082674] s3cfb s3cfb: registered successfully
[ 1.085865] leds initialized
[ 1.085960] buttons initialized
[ 1.086080] pwm initialized
[ 1.086213] mini210-adc initialized
[ 1.086700] PA FB = 0x35FAF000, bits per pixel = 32
[ 1.086746] screen width=800 height=480 va=0xd5faf000 pa=0x35faf000
[ 1.088348] xres_virtual = 800, yres_virtual = 960, xoffset = 0, yoffset = 0
[ 1.095353] fb_size=3072000
[ 1.098129] Back frameBuffer[0].VAddr=d6126000 PAddr=36126000 size=1536000
[ 1.105240] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
[ 1.113279] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
[ 1.121395] s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
[ 1.129535] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
[ 1.139978] loop: module loaded
[ 1.141144] S3C NAND Driver, (c) 2008 Samsung Electronics
[ 1.146163] S3C NAND Driver is using hardware ECC.
[ 1.150851] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
[ 1.159236] Creating 5 MTD partitions on "s5pv210-nand":
[ 1.164510] 0x0000000c0000-0x000000100000 : "misc"
[ 1.170070] 0x000000100000-0x000000600000 : "recovery"
[ 1.175906] 0x000000600000-0x000000b00000 : "kernel"
[ 1.180843] 0x000000b00000-0x000000e00000 : "ramdisk"
[ 1.185512] 0x000000e00000-0x000040000000 : "system"
[ 1.370303] PPP generic driver version 2.4.2
[ 1.370471] PPP Deflate Compression module registered
[ 1.370518] PPP BSD Compression module registered
[ 1.370561] NET: Registered protocol family 24
[ 1.372103] dm9000 Ethernet Driver, V1.31
[ 1.373247] eth0: dm9000a at e0892000,e089800c IRQ 39 MAC: 08:90:00:a0:02:10 (platform data)
[ 1.378861] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.385497] s5p-ehci s5p-ehci: s5pv210 EHCI
[ 1.389574] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 1.396591] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
[ 1.411993] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[ 1.412173] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.413906] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.421119] usb usb1: Product: s5pv210 EHCI
[ 1.425270] usb usb1: Manufacturer: Linux 2.6.35.7-FriendlyARM ehci_hcd
[ 1.431856] usb usb1: SerialNumber: s5pv210
[ 1.436424] hub 1-0:1.0: USB hub found
[ 1.439763] hub 1-0:1.0: 1 port detected
[ 1.443990] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.449939] s5p-ohci s5p-ohci: s5pv210 OHCI
[ 1.453999] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
[ 1.460993] s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
[ 1.521686] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.521746] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.521808] usb usb2: Product: s5pv210 OHCI
[ 1.521846] usb usb2: Manufacturer: Linux 2.6.35.7-FriendlyARM ohci_hcd
[ 1.524127] usb usb2: SerialNumber: s5pv210
[ 1.528679] hub 2-0:1.0: USB hub found
[ 1.532037] hub 2-0:1.0: 1 port detected
[ 1.536405] usbcore: registered new interface driver usbserial
[ 1.541783] USB Serial support registered for generic
[ 1.546831] usbcore: registered new interface driver usbserial_generic
[ 1.553260] usbserial: USB Serial Driver core
[ 1.557629] USB Serial support registered for aircable
[ 1.562761] usbcore: registered new interface driver aircable
[ 1.568461] USB Serial support registered for ark3116
[ 1.573506] usbcore: registered new interface driver ark3116
[ 1.579081] ark3116:v0.6:USB ARK3116 serial/IrDA driver
[ 1.584317] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 1.592575] usbcore: registered new interface driver belkin
[ 1.598055] belkin_sa: v1.3:USB Belkin Serial converter driver
[ 1.603900] USB Serial support registered for ch341-uart
[ 1.609208] usbcore: registered new interface driver ch341
[ 1.614654] USB Serial support registered for cp210x
[ 1.619619] usbcore: registered new interface driver cp210x
[ 1.625092] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[ 1.631899] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 1.639455] usbcore: registered new interface driver cyberjack
[ 1.645200] cyberjack: v1.01 Matthias Bruestle
[ 1.649614] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[ 1.657282] USB Serial support registered for DeLorme Earthmate USB
[ 1.663525] USB Serial support registered for HID->COM RS232 Adapter
[ 1.669847] USB Serial support registered for Nokia CA-42 V2 Adapter
[ 1.676196] usbcore: registered new interface driver cypress
[ 1.681769] cypress_m8: v1.10:Cypress USB to Serial Driver
[ 1.687265] USB Serial support registered for debug
[ 1.692140] usbcore: registered new interface driver debug
[ 1.697583] USB Serial support registered for Digi 2 port USB adapter
[ 1.703990] USB Serial support registered for Digi 4 port USB adapter
[ 1.710427] usbcore: registered new interface driver digi_acceleport
[ 1.716693] digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
[ 1.724961] USB Serial support registered for Edgeport 2 port adapter
[ 1.731374] USB Serial support registered for Edgeport 4 port adapter
[ 1.737791] USB Serial support registered for Edgeport 8 port adapter
[ 1.744199] USB Serial support registered for EPiC device
[ 1.749607] usbcore: registered new interface driver io_edgeport
[ 1.755512] io_edgeport: v2.7:Edgeport USB Serial Driver
[ 1.760839] USB Serial support registered for Edgeport TI 1 port adapter
[ 1.767518] USB Serial support registered for Edgeport TI 2 port adapter
[ 1.774209] usbcore: registered new interface driver io_ti
[ 1.779601] io_ti: v0.7mode043006:Edgeport USB Serial Driver
[ 1.785278] USB Serial support registered for empeg
[ 1.790158] usbcore: registered new interface driver empeg
[ 1.795551] empeg: v1.3:USB Empeg Mark I/II Driver
[ 1.800354] USB Serial support registered for FTDI USB Serial Device
[ 1.806783] usbcore: registered new interface driver ftdi_sio
[ 1.812358] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 1.818210] USB Serial support registered for funsoft
[ 1.823255] usbcore: registered new interface driver funsoft
[ 1.828864] USB Serial support registered for Garmin GPS usb/tty
[ 1.834866] usbcore: registered new interface driver garmin_gps
[ 1.840697] garmin_gps: v0.33:garmin gps driver
[ 1.845241] USB Serial support registered for hp4X
[ 1.850018] usbcore: registered new interface driver hp4X
[ 1.855342] hp4x: v1.00:HP4x (48/49) Generic Serial driver
[ 1.860844] USB Serial support registered for PocketPC PDA
[ 1.866384] usbcore: registered new interface driver ipaq
[ 1.871631] ipaq: v1.0:USB PocketPC PDA driver
[ 1.876094] USB Serial support registered for IPWireless converter
[ 1.882272] usbcore: registered new interface driver ipwtty
[ 1.887748] ipw: v0.4:IPWireless tty driver
[ 1.891953] USB Serial support registered for IR Dongle
[ 1.897174] usbcore: registered new interface driver ir-usb
[ 1.902652] ir_usb: v0.5:USB IR Dongle driver
[ 1.907031] USB Serial support registered for iuu_phoenix
[ 1.912425] usbcore: registered new interface driver iuu_phoenix
[ 1.918337] iuu_phoenix: v0.11:Infinity USB Unlimited Phoenix driver
[ 1.924710] USB Serial support registered for Keyspan - (without firmware)
[ 1.931552] USB Serial support registered for Keyspan 1 port adapter
[ 1.937878] USB Serial support registered for Keyspan 2 port adapter
[ 1.944207] USB Serial support registered for Keyspan 4 port adapter
[ 1.950556] usbcore: registered new interface driver keyspan
[ 1.956122] keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
[ 1.962318] USB Serial support registered for Keyspan PDA
[ 1.967695] USB Serial support registered for Keyspan PDA - (prerenumeration)
[ 1.974795] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[ 1.982794] usbcore: registered new interface driver keyspan_pda
[ 1.988702] keyspan_pda: v1.1:USB Keyspan PDA Converter driver
[ 1.994555] USB Serial support registered for KL5KUSB105D / PalmConnect
[ 2.001160] usbcore: registered new interface driver kl5kusb105d
[ 2.007074] kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
[ 2.014572] USB Serial support registered for KOBIL USB smart card terminal
[ 2.021531] usbcore: registered new interface driver kobil
[ 2.026919] kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
[ 2.034764] USB Serial support registered for MCT U232
[ 2.039897] usbcore: registered new interface driver mct_u232
[ 2.045555] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
[ 2.052792] USB Serial support registered for Moschip 2 port adapter
[ 2.059067] mos7720: 2.1:Moschip USB Serial Driver
[ 2.063899] usbcore: registered new interface driver moschip7720
[ 2.069863] USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 2.077266] mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
[ 2.083142] usbcore: registered new interface driver mos7840
[ 2.088754] USB Serial support registered for moto-modem
[ 2.094046] usbcore: registered new interface driver moto-modem
[ 2.099932] USB Serial support registered for navman
[ 2.104889] usbcore: registered new interface driver navman
[ 2.110413] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[ 2.117385] usbcore: registered new interface driver omninet
[ 2.122934] omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
[ 2.128608] USB Serial support registered for opticon
[ 2.133656] usbcore: registered new interface driver opticon
[ 2.139272] USB Serial support registered for GSM modem (1-port)
[ 2.145342] usbcore: registered new interface driver option
[ 2.150751] option: v0.7.2:USB Driver for GSM modems
[ 2.155735] USB Serial support registered for oti6858
[ 2.160779] usbcore: registered new interface driver oti6858
[ 2.166391] USB Serial support registered for pl2303
[ 2.171359] usbcore: registered new interface driver pl2303
[ 2.176834] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 2.182858] USB Serial support registered for qcaux
[ 2.187722] usbcore: registered new interface driver qcaux
[ 2.193168] USB Serial support registered for Qualcomm USB modem
[ 2.199179] usbcore: registered new interface driver qcserial
[ 2.204827] safe_serial: v0.1:USB Safe Encapsulated Serial
[ 2.210332] USB Serial support registered for safe_serial
[ 2.215720] usbcore: registered new interface driver safe_serial
[ 2.221682] USB Serial support registered for siemens_mpi
[ 2.227062] usbcore: registered new interface driver siemens_mpi
[ 2.232987] Driver for Siemens USB/MPI adapter
[ 2.237404] Version 0.1 09/26/2005 Thomas
Hergenhahn@web.de http://libnodave.sf.net[ 2.245077] USB Serial support registered for Sierra USB modem
[ 2.250911] usbcore: registered new interface driver sierra
[ 2.256385] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[ 2.262928] USB Serial support registered for SPCP8x5
[ 2.267980] usbcore: registered new interface driver spcp8x5
[ 2.273542] spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver
[ 2.279480] USB Serial support registered for symbol
[ 2.284444] usbcore: registered new interface driver symbol
[ 2.289967] USB Serial support registered for TI USB 3410 1 port adapter
[ 2.296645] USB Serial support registered for TI USB 5052 2 port adapter
[ 2.303333] usbcore: registered new interface driver ti_usb_3410_5052
[ 2.309681] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[ 2.315874] USB Serial support registered for Handspring Visor / Palm OS
[ 2.322546] USB Serial support registered for Sony Clie 3.5
[ 2.328094] USB Serial support registered for Sony Clie 5.0
[ 2.333663] usbcore: registered new interface driver visor
[ 2.339056] visor: USB HandSpring Visor / Palm OS driver
[ 2.344387] USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[ 2.352617] USB Serial support registered for Connect Tech - WhiteHEAT
[ 2.359139] usbcore: registered new interface driver whiteheat
[ 2.364882] whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
[ 2.370555] USB Serial support registered for vivopay-serial
[ 2.376196] usbcore: registered new interface driver vivopay-serial
[ 2.382386] vivopay_serial: v1.0:ViVOpay USB Serial Driver
[ 2.387884] USB Serial support registered for zio
[ 2.392572] usbcore: registered new interface driver zio
[ 2.397811] Initializing USB Mass Storage driver...
[ 2.402772] usbcore: registered new interface driver usb-storage
[ 2.408641] USB Mass Storage support registered.
[ 2.413358] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
[ 2.413365] s3c-udc : version 15 March 2009 (DMA Mode)
[ 2.426756] android init
[ 2.429297] android_probe pdata: c07ceb68
[ 2.433317] android_bind
[ 2.435870] android_usb gadget: android_usb ready
[ 2.456057] f_acm init
[ 2.456082] android_register_function acm
[ 2.456118] f_adb init
[ 2.456140] android_register_function adb
[ 2.456175] f_mass_storage init
[ 2.456238] fsg_probe pdev: c07cdae8, pdata: c07ceb8c
[ 2.461276] android_register_function usb_mass_storage
[ 2.466351] f_mtp init
[ 2.468693] android_register_function mtp
[ 2.472675] f_rndis init
[ 2.475255] android_register_function rndis
[ 2.479355] rndis_function_bind_config MAC: 02:4D:48:46:48:3B
[ 2.485092] android_usb gadget: using random self ethernet address
[ 2.491230] android_usb gadget: using random host ethernet address
[ 2.498305] usb0: MAC 5e:a5:5b:72:0c:59
[ 2.501173] usb0: HOST MAC da:3d:cc:e2:03:93
[ 2.505652] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.512284] android_usb gadget: Number of LUNs=1
[ 2.516873] lun0: LUN: removable file: (no medium)
[ 2.521802] adb_bind_config
[ 2.524927] mtp_bind_config
[ 2.527610] mice: PS/2 mouse device common for all mice
[ 2.532706] touchscreen-1wire initialized
[ 2.536459] backlight-1wire initialized
[ 2.540326] setup_irq: ret = 0
[ 2.543319] PWM clock = 66700000
[ 2.546530] TCNT_FOR_SAMPLE_BIT = 3472
[ 2.550234] TCFG1 = 00000003 - 00000003
[ 2.554291] input: fa_ts_input as /devices/virtual/input/input0
[ 2.560214] ts-if initialized
[ 2.563094] using rtc device, s3c, for alarms
[ 2.567146] i2c /dev entries driver
[ 2.571065] Linux video capture interface: v2.00
[ 2.575291] 3 - TCNTB = 00000d90, TCNTO = 000001b9
[ 2.580049] TINT_CSTAT = 00000008
[ 2.583505] s3c-csis: Samsung MIPI-CSI2 driver probed successfully
[ 2.589550] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
[ 2.589556]
[ 2.597729] 4 - TCNTB = 00000d90, TCNTO = 000008e4
[ 2.602489] TINT_CSTAT = 00000008
[ 2.606272] S3C JPEG Driver, (c) 2007 Samsung Electronics
[ 2.611167] JPEG driver for S5PV210
[ 2.615217] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
[ 2.621073] S5PC11X HPD Driver, (c) 2009 Samsung Electronics
[ 2.626893] S5PC11X CEC Driver, (c) 2009 Samsung Electronics
[ 2.632855] usbcore: registered new interface driver uvcvideo
[ 2.638028] USB Video Class driver (v0.1.0)
[ 2.642182] s3c_bat_init
[ 2.644732] sec-fake-battery sec-fake-battery: s3c_bat_probe
[ 2.650725] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[ 2.656466] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
[ 2.663936] device-mapper: uevent: version 1.0.3
[ 2.671864] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised:
dm-devel@redhat.com[ 2.676879] Bluetooth: HCI UART driver ver 2.2
[ 2.681266] Bluetooth: HCI H4 protocol initialized
[ 2.686029] Bluetooth: HCILL protocol initialized
[ 2.690707] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 2.696379] usbcore: registered new interface driver btusb
[ 2.701776] cpuidle: using governor ladder
[ 2.705864] cpuidle: using governor menu
[ 2.709730] sdhci: Secure Digital Host Controller Interface driver
[ 2.715843] sdhci: Copyright(c) Pierre Ossman
[ 2.720285] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
[ 2.726782] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
[ 2.733361] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
[ 2.740381] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[ 2.747173] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
[ 2.753727] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz)
[ 2.760314] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
[ 2.767280] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[ 2.774131] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
[ 2.780670] s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
[ 2.787264] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
[ 2.794230] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[ 2.801073] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
[ 2.807620] s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)
[ 2.814208] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
[ 2.821195] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
[ 2.828126] usb 1-1: new high speed USB device using s5p-ehci and address 2
[ 2.835250] usbcore: registered new interface driver usbhid
[ 2.840457] usbhid: USB HID core driver
[ 2.844754] S5PC11X RP driver, (c) 2010 Samsung Electronics
[ 2.849894] ALSA device list:
[ 2.852754] No soundcards found.
[ 2.856165] GACT probability NOT on
[ 2.859609] Mirror/redirect action on
[ 2.863242] u32 classifier
[ 2.865925] Actions configured
[ 2.869314] Netfilter messages via NETLINK v0.30.
[ 2.874054] nf_conntrack version 0.5.0 (5367 buckets, 21468 max)
[ 2.880125] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 2.887338] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 2.895218] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 2.902004] ctnetlink v0.93: registering with nfnetlink.
[ 2.906778] xt_time: kernel timezone is -0000
[ 2.913142] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.916385] arp_tables: (C) 2002 David S. Miller
[ 2.920937] TCP cubic registered
[ 2.924107] NET: Registered protocol family 10
[ 2.930358] lo: Disabled Privacy Extensions
[ 2.938500] Mobile IPv6
[ 2.938528] IPv6 over IPv4 tunneling driver
[ 2.940801] sit0: Disabled Privacy Extensions
[ 2.946437] ip6tnl0: Disabled Privacy Extensions
[ 2.949517] NET: Registered protocol family 17
[ 2.952618] NET: Registered protocol family 15
[ 2.959204] Bluetooth: L2CAP ver 2.14
[ 2.960630] Bluetooth: L2CAP socket layer initialized
[ 2.965685] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.970176] Bluetooth: SCO socket layer initialized
[ 2.975122] Bluetooth: RFCOMM TTY layer initialized
[ 2.979906] Bluetooth: RFCOMM socket layer initialized
[ 2.984994] Bluetooth: RFCOMM ver 1.11
[ 2.988719] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.994011] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.999966] ThumbEE CPU extension supported.
[ 3.004259] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[ 3.012141] regulator_init_complete: disabling pd_mfc_supply
[ 3.017419] regulator_init_complete: disabling pd_tv_supply
[ 3.022952] regulator_init_complete: disabling pd_cam_supply
[ 3.028633] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[ 3.034580] smdkc110-rtc smdkc110-rtc: setting system clock to 2012-01-02 14:29:13 UTC (1325514553)
[ 3.045051] FIMC0 registered successfully
[ 3.048860] FIMC1 registered successfully
[ 3.052785] FIMC2 registered successfully
[ 3.055563] <6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
[ 3.062261] s5p-tvout s5p-tvout: hpd status is cable removed
[ 3.106482] mmc0: new high speed SD card at address 0002
[ 3.106767] mmcblk0: mmc0:0002 00000 1.86 GiB
[ 3.107014] mmcblk0: p1
[ 3.146741] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 3.146801] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.147373] hub 1-1:1.0: USB hub found
[ 3.147467] hub 1-1:1.0: 4 ports detected
[ 3.420018] usb 1-1.4: new low speed USB device using s5p-ehci and address 3
[ 3.531348] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0020
[ 3.531413] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.531478] usb 1-1.4: Product: PS2toUSB Adapter
[ 3.531520] usb 1-1.4: Manufacturer: GASIA
[ 3.536366] input: GASIA PS2toUSB Adapter as /devices/platform/s5p-ehci/usb1/1-1/1-1.4/1-1.4:1.0/input/input1
[ 3.542032] generic-usb 0003:0E8F:0020.0001: input: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-s5pv210-1.4/input0
[ 3.570594] input: GASIA PS2toUSB Adapter as /devices/platform/s5p-ehci/usb1/1-1/1-1.4/1-1.4:1.1/input/input2
[ 3.570949] generic-usb 0003:0E8F:0020.0002: input: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-s5pv210-1.4/input1
[ 3.607310] eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 4.611336] IP-Config: Complete:
[ 4.611368] device=eth0, addr=192.168.0.73, mask=255.255.255.0, gw=192.168.0.77,
[ 4.611446] host=tiny210, domain=, nis-domain=arm9.net,
[ 4.611495] bootserver=192.168.0.77, rootserver=192.168.0.77, rootpath=
[ 4.612881] DBUG_PORT must not use AFC!
[ 4.616812] Freeing init memory: 1432K
mount: 192.168.0.77:/opt/FriendlyARM/tiny210/linux/rootfs_qropia_qt4 failed, reason given by server: Permission denied
1Wire touchscreen OK
/init: line 103: can't open /r/dev/console: no such file
[ 4.665960] Kernel panic - not syncing: Attempted to kill init!
[ 4.666021] Backtrace:
[ 4.666067] [<c0172efc>] (dump_backtrace+0x0/0x110) from [<c05bdaa4>] (dump_stack+0x18/0x1c)
[ 4.666144] r6:cfc24000 r5:c07d3d40 r4:c07d259c r3:00000000
[ 4.666210] [<c05bda8c>] (dump_stack+0x0/0x1c) from [<c05bdb1c>] (panic+0x74/0xf0)
[ 4.673637] [<c05bdaa8>] (panic+0x0/0xf0) from [<c019acb0>] (do_exit+0x74/0x5f4)
[ 4.680991] r3:c07d3d40 r2:00000000 r1:00000022 r0:c0731874
[ 4.686616] [<c019ac3c>] (do_exit+0x0/0x5f4) from [<c019b514>] (do_group_exit+0x98/0xc8)
[ 4.694683] r7:000000f8
[ 4.697198] [<c019b47c>] (do_group_exit+0x0/0xc8) from [<c019b55c>] (sys_exit_group+0x18/0x20)
[ 4.706037] r7:000000f8 r6:00000001 r5:bed58f14 r4:00000004
[ 4.711400] [<c019b544>] (sys_exit_group+0x0/0x20) from [<c016efc0>] (ret_fast_syscall+0x0/0x30)
[ 4.720162] Rebooting in 5 seconds..
[ 9.807873] Restarting Linux versBoard type: 2
NAND Low-level formating...
