主题 : 收藏 uboot引导内核错误——booting the kernel 复制链接 | 浏览器收藏 | 打印
级别: 新手上路
UID: 74119
精华: 0
发帖: 13
金钱: 65 两
威望: 13 点
贡献值: 0 点
综合积分: 26 分
注册时间: 2012-07-19
最后登录: 2017-09-13
楼主  发表于: 2012-12-20 16:48

 收藏 uboot引导内核错误——booting the kernel

U-Boot 1.1.6 (Dec 20 2012 - 13:58:04)
DRAM:  64 MB
Flash:  2 MB
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0

NAND read: device 0 offset 0x60000, size 0x500000
5242880 bytes read: OK
## Booting image at 30008000 ...
   Image Name:   Linux kernel Image by embedclub
   Created:      2012-05-08   8:32:07 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2288308 Bytes =  2.2 MB
   Load Address: 30008000
   Entry Point:  30008040
   Verifying Checksum ... OK
   XIP Kernel Image ... OK

Starting kernel ...

Uncompressing Linux.................................................................................................................................................... done, booting the kernel.

uboot引导内核到这就死掉了,不知道什么原因 ,机器码正确,内核也用2010.03的uboot测试过,可以引导启动,郁闷中、、难道不同版本的uboot的内核还要重新编译,不要了吧!!谁给点信息啊
级别: 风云使者
UID: 36096
精华: 3
发帖: 2513
金钱: 14075 两
威望: 2815 点
贡献值: 3 点
综合积分: 5086 分
注册时间: 2011-01-11
最后登录: 2015-11-15
1楼  发表于: 2012-12-20 19:42
楼上帖子不错,标记一下
极度缺钱,求捐赠……支付宝兼邮箱:huming2207@qq.com