主题 : 使用uboot引导linux内核会卡在某个地方。请问是什么原因呢。 复制链接 | 浏览器收藏 | 打印
级别: 新手上路
UID: 140236
精华: 0
发帖: 6
金钱: 30 两
威望: 6 点
贡献值: 0 点
综合积分: 12 分
注册时间: 2018-11-17
最后登录: 2018-12-14
楼主  发表于: 27天前

 使用uboot引导linux内核会卡在某个地方。请问是什么原因呢。

各位大哥们,小弟遇到一个问题,困扰了好久。    
开发板是smart210 (tiny210 v2)。使用的内核是光盘里的内核按照android的配置编译生成zImage后再转成uImage。
文件系统是友善之臂给的。
使用uboot 烧写好文件系统和zImage内核后使用MiniTools的快速启动就可以成功启动。
而用同样的zImage转换的uImage就会卡在挂载文件系统后的某一个位置,
一般是android的logo亮一会后。
请问是什么原因呢
这是uboot启动时内核输出的信息:[Ver130913-TINY210v2]# bootm 21000000 
## Booting kernel from Legacy Image at 21000000 ...
   Image Name:   linux-3.0.8
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4629540 Bytes = 4.4 MiB
   Load Address: 20008000

   Entry Point:  20008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.8-FriendlyARM (root@wangzh-Precision-3630-Tower) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #2 PREEMPT Tu8
[    0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: MINI210
[    0.000000] MINI210: S70 selected
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] CPU S5PV210/S5PC110 (id 0x43110220)
[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[    0.000000] S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
[    0.000000] S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
[    0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
[    0.000000] sclk_dmc: source is sclk_a2m (0), rate is 200000000
[    0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000

[    0.000000] uclk1: source is mout_mpll (6), rate is 66700000

[    0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[    0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[    0.000000] uclk1: source is mout_mpll (6), rate is 66700000

[    0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000
[    0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
[    0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857   //这两行和Minitools的快速启动输出的信息不同,那个地方是80000000
[    0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[    0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[    0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
[    0.000000] sclk_g2d: source is sclk_a2m (0), rate is 200000000
[    0.000000] sclk_g3d: source is sclk_a2m (0), rate is 200000000
[    0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[    0.000000] s5p: 36864 kbytes system memory reserved for mfc at 0x3dbf5000, 0-bank base(0x3dbf5000)     //这几行也和Minitools快速启动的输出不同 
[    0.000000] s5p: 36864 kbytes system memory reserved for mfc at 0x3b7f5000, 1-bank base(0x00000000)
[    0.000000] s5p: 6144 kbytes system memory reserved for fimc0 at 0x3b1f5000, 1-bank base(0x00000000)
[    0.000000] s5p: 16 kbytes system memory reserved for fimc1 at 0x3b1f1000, 1-bank base(0x00000000)
[    0.000000] s5p: 6144 kbytes system memory reserved for fimc2 at 0x3abf1000, 1-bank base(0x00000000)
[    0.000000] s5p: 8192 kbytes system memory reserved for jpeg at 0x3a3f1000, 0-bank base(0x3a3f1000)
[    0.000000] s5p: 13060 kbytes system memory reserved for fimd at 0x39730000, 1-bank base(0x00000000)  

[    0.000000] s5p: 8192 kbytes system memory reserved for g2d at 0x38f30000, 0-bank base(0x38f30000)
[    0.000000] s5p: 1800 kbytes system memory reserved for pmem_gpu1 at 0x38d6e000, 0-bank base(0x38d6e000)
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 100729
[    0.000000] Kernel command line: root=/dev/mtdblock4 rootfstype=yaffs2 console=ttySAC0,115200 init=/linuxrc androidboot.console=t0

[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 397MB 0MB = 397MB total
[    0.000000] Memory: 392064k/509340k available, 14948k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
[    0.000000]     vmalloc : 0xe0800000 - 0xfd000000   ( 456 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .init : 0xc0008000 - 0xc0174000   (1456 kB)
[    0.000000]       .text : 0xc0174000 - 0xc0881ddc   (7224 kB)
[    0.000000]       .data : 0xc0882000 - 0xc08d9a40   ( 351 kB)
[    0.000000]        .bss : 0xc08d9a64 - 0xc0a1eba0   (1301 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:393
[    0.000000] VIC @fd000000: id 0x00041192, vendor 0x41
[    0.000000] VIC @fd010000: id 0x00041192, vendor 0x41
[    0.000000] VIC @fd020000: id 0x00041192, vendor 0x41
[    0.000000] VIC @fd030000: id 0x00041192, vendor 0x41
[    0.000000] mult[140737]
[    0.000000] max_delta_ns[2937815369]
[    0.000000] min_delta_ns[30517]
[    0.000000] rate[32768]
[    0.000000] HZ[256]
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttySAC0] enabled
[    0.452788] Calibrating delay loop... 994.84 BogoMIPS (lpj=1941504)
[    0.476555] pid_max: default: 32768 minimum: 301
[    0.476772] Mount-cache hash table entries: 512
[    0.477257] Initializing cgroup subsys debug
[    0.477310] Initializing cgroup subsys cpuacct
[    0.477364] Initializing cgroup subsys freezer
[    0.481284] CPU: Testing write buffer coherency: ok
[    0.491663] print_constraints: dummy: 
[    0.491945] NET: Registered protocol family 16
[    0.510697] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.528076] fimd at 0x39730000
[    0.528184] hsmmc0: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.528255] hsmmc1: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.528319] hsmmc2: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.528384] hsmmc3: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.536168] S5PV210: Initializing architecture
[    0.540477] s3c-adc s5pv210-adc: attached adc driver
[    0.543759] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
[    0.552822] print_constraints: pd_tv_supply: 5000 mV normal 
[    0.557765] print_constraints: pd_lcd_supply: 5000 mV normal 
[    0.563490] print_constraints: pd_g3d_supply: 5000 mV normal 
[    0.569200] print_constraints: pd_mfc_supply: 5000 mV normal 
[    0.574907] print_constraints: pd_audio_supply: 5000 mV normal 
[    0.689085] bio: create slab <bio-0> at 0
[    0.691863] SCSI subsystem initialized
[    0.697196] usbcore: registered new interface driver usbfs
[    0.698029] usbcore: registered new interface driver hub
[    0.698544] usbcore: registered new device driver usb
[    0.700313] s3c-i2c s3c2440-i2c.0: slave address 0x10
[    0.700376] s3c-i2c s3c2440-i2c.0: bus frequency set to 378 KHz

[    0.703435] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[    0.707290] s3c-i2c s3c2440-i2c.1: slave address 0x10
[    0.712126] s3c-i2c s3c2440-i2c.1: bus frequency set to 65 KHz
[    0.718696] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[    0.723417] s3c-i2c s3c2440-i2c.2: slave address 0x10
[    0.728317] s3c-i2c s3c2440-i2c.2: bus frequency set to 378 KHz
[    0.735398] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[    0.741263] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.747205] Bluetooth: Core ver 2.16
[    0.749720] NET: Registered protocol family 31
[    0.754008] Bluetooth: HCI device and connection manager initialized
[    0.760171] Bluetooth: HCI socket layer initialized
[    0.765029] Bluetooth: L2CAP socket layer initialized
[    0.770037] Bluetooth: SCO socket layer initialized
[    0.775608] Switching to clocksource clock_source_systimer
[    0.781278] Switched to NOHz mode on CPU #0
[    0.820795] NET: Registered protocol family 2
[    0.821064] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.821853] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.822164] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[    0.824074] TCP: Hash tables configured (established 16384 bind 16384)
[    0.830186] TCP reno registered
[    0.833271] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.839162] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)[    0.845794] NET: Registered protocol family 1
[    0.850314] RPC: Registered named UNIX socket transport module.
[    0.855801] RPC: Registered udp transport module.
[    0.860375] RPC: Registered tcp transport module.
[    0.865039] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.888060] PMU: registered new PMU device of type 0
[    0.888782] cpuidle: phy_regs_save:0x38b29000
[    0.889060] Loaded driver for PL330 DMAC-0 s3c-pl330
[    0.889114]  DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
[    0.892031] Loaded driver for PL330 DMAC-1 s3c-pl330
[    0.896857]  DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.902923] Loaded driver for PL330 DMAC-2 s3c-pl330
[    0.907703]  DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.922824] ashmem: initialized
[    0.955363] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.956024] msgmni has been set to 765
[    0.958828] io scheduler noop registered
[    0.958875] io scheduler deadline registered
[    0.959120] io scheduler cfq registered (default)
[    0.959167] start plist test
[    0.965252] end plist test

[    0.965975] s3cfb s3cfb: win 2: pmem_start=0x39b95000
[    0.966034] s3cfb s3cfb: [fb2] dma: 0x39b95000, cpu: 0xe1000000, size: 0x0085c000
[    0.981510] FIMD src sclk = 166750000
[    0.981623] s3cfb s3cfb: registered successfully
[    0.981671] Start display and show logo
[    1.003860] s5pv210-uart.0: ttySAC0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
[    1.011155] s5pv210-uart.1: ttySAC1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
[    1.018964] s5pv210-uart.2: ttySAC2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
[    1.026751] s5pv210-uart.3: ttySAC3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
[    1.035971] leds     initialized
[    1.036501] pwm      initialized
[    1.037087] mini210-adc      initialized
[    1.037963] backlight        initialized
[    1.040041] PA FB = 0x39B95000, bits per pixel = 32
[    1.040094] screen width=800 height=480 va=0xd9b95000 pa=0x39b95000
[    1.040149] xres_virtual = 800, yres_virtual = 1440, xoffset = 0, yoffset = 0
[    1.044601] fb_size=8765440
[    1.047237] Back frameBuffer[0].VAddr=d9d0c000 PAddr=39d0c000 size=1536000
[    1.054077] Back frameBuffer[1].VAddr=d9e83000 PAddr=39e83000 size=1536000
[    1.060901] Video Y Buffer[0].VAddr=d9ffa000 PAddr=39ffa000 size=921600
[    1.067471] Video Y Buffer[1].VAddr=da0db000 PAddr=3a0db000 size=921600
[    1.074052] Video Y Buffer[2].VAddr=da1bc000 PAddr=3a1bc000 size=921600
[    1.080629] Video UV Buffer[0].VAddr=da29d000 PAddr=3a29d000 size=462848
[    1.087312] Video UV Buffer[1].VAddr=da30e000 PAddr=3a30e000 size=462848
[    1.093977] Video UV Buffer[2].VAddr=da37f000 PAddr=3a37f000 size=462848
[    1.116922] brd: module loaded
[    1.125551] loop: module loaded
[    1.125678] pmem_gpu1: 1 init
[    1.126705] Android kernel panic handler initialized (bind=kpanic)
[    1.129928] S3C NAND Driver, (c) 2008 Samsung Electronics
[    1.233602] S3C NAND Driver is not using software ECC.
[    1.233735] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
[    1.233820] NAND_ECC_NONE selected by board driver. This is not recommended !!
[    1.233885] NAND subpage size: 2048 bytes
[    1.236051] Creating 5 MTD partitions on "s5pv210-nand":
[    1.241379] 0x0000000c0000-0x000000100000 : "misc"
[    1.248599] 0x000000100000-0x000000600000 : "recovery"
[    1.255513] 0x000000600000-0x000000b00000 : "kernel"
[    1.260231] 0x000000b00000-0x000000e00000 : "ramdisk"
[    1.264648] 0x000000e00000-0x000040000000 : "system"
[    1.625658] PPP generic driver version 2.4.2
[    1.626575] PPP Deflate Compression module registered
[    1.626634] PPP BSD Compression module registered
[    1.627809] PPP MPPE Compression module registered
[    1.627865] NET: Registered protocol family 24
[    1.630297] tun: Universal TUN/TAP device driver, 1.6
[    1.631567] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.638437] dm9000 Ethernet Driver, V1.31

[    1.643533] eth0: dm9000a at e0838000,e083c00c IRQ 39 MAC: 00:40:5c:26:0a:5b (chip)
[    1.650287] usbcore: registered new interface driver dm9620

[    1.655379] sdhci: Secure Digital Host Controller Interface driver
[    1.661189] sdhci: Copyright(c) Pierre Ossman
[    1.665575] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
[    1.672045] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
[    1.678863] mmc0: no vmmc regulator found
[    1.683628] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[    1.689953] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
[    1.696401] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
[    1.705241] mmc1: no vmmc regulator found
[    1.708045] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[    1.714293] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
[    1.720810] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
[    1.727618] mmc2: no vmmc regulator found
[    1.735547] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[    1.738657] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
[    1.745122] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
[    1.751941] mmc3: no vmmc regulator found
[    1.759934] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
[    1.763353] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.769729] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[    1.774656] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[    1.781685] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
[    1.796242] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[    1.797583] hub 1-0:1.0: USB hub found
[    1.797663] hub 1-0:1.0: 1 port detected
[    1.801048] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.806357] s5p-ohci s5p-ohci: EXYNOS OHCI Host Controller
[    1.812693] mmc0: new high speed SDHC card at address aaaa
[    1.816977] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2

[    1.824590] mmcblk0: mmc0:aaaa SS08G 7.40 GiB 

[    1.828717] s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
[    1.835356]  mmcblk0: p1
[    1.891301] hub 2-0:1.0: USB hub found
[    1.891378] hub 2-0:1.0: 1 port detected
[    1.893327] usbcore: registered new interface driver usbserial
[    1.893800] USB Serial support registered for generic
[    1.894290] usbcore: registered new interface driver usbserial_generic
[    1.894358] usbserial: USB Serial Driver core
[    1.902268] USB Serial support registered for aircable
[    1.903866] usbcore: registered new interface driver aircable
[    1.909735] USB Serial support registered for ark3116

[    1.914732] usbcore: registered new interface driver ark3116
[    1.922049] ark3116:v0.6:USB ARK3116 serial/IrDA driver
[    1.925402] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[    1.933769] usbcore: registered new interface driver belkin
[    1.942244] belkin_sa: v1.3:USB Belkin Serial converter driver
[    1.944998] USB Serial support registered for ch341-uart
[    1.950449] usbcore: registered new interface driver ch341
[    1.955823] USB Serial support registered for cp210x
[    1.962861] usbcore: registered new interface driver cp210x
[    1.966002] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[    1.972999] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[    1.984002] usbcore: registered new interface driver cyberjack
[    1.985951] cyberjack: v1.01 Matthias Bruestle
[    1.990508] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[    2.000691] USB Serial support registered for DeLorme Earthmate USB
[    2.004683] USB Serial support registered for HID->COM RS232 Adapter
[    2.011105] USB Serial support registered for Nokia CA-42 V2 Adapter
[    2.017477] usbcore: registered new interface driver cypress
[    2.023754] cypress_m8: v1.10:Cypress USB to Serial Driver
[    2.030469] USB Serial support registered for Digi 2 port USB adapter
[    2.034910] USB Serial support registered for Digi 4 port USB adapter
[    2.041397] usbcore: registered new interface driver digi_acceleport
[    2.047319] digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
[    2.056186] USB Serial support registered for Edgeport 2 port adapter
[    2.062343] USB Serial support registered for Edgeport 4 port adapter
[    2.068638] USB Serial support registered for Edgeport 8 port adapter
[    2.075067] USB Serial support registered for EPiC device
[    2.082608] usbcore: registered new interface driver io_edgeport
[    2.086089] io_edgeport: v2.7:Edgeport USB Serial Driver
[    2.091643] USB Serial support registered for Edgeport TI 1 port adapter
[    2.098409] USB Serial support registered for Edgeport TI 2 port adapter
[    2.105264] usbcore: registered new interface driver io_ti
[    2.110196] usb 1-1: new high speed USB device number 2 using s5p-ehci
[    2.117718] io_ti: v0.7mode043006:Edgeport USB Serial Driver
[    2.124825] USB Serial support registered for empeg
[    2.127545] usbcore: registered new interface driver empeg
[    2.132638] empeg: v1.3:USB Empeg Mark I/II Driver
[    2.137717] USB Serial support registered for FTDI USB Serial Device
[    2.144301] usbcore: registered new interface driver ftdi_sio
[    2.149501] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[    2.155655] USB Serial support registered for funsoft
[    2.160691] usbcore: registered new interface driver funsoft
[    2.166284] USB Serial support registered for Garmin GPS usb/tty
[    2.172357] usbcore: registered new interface driver garmin_gps
[    2.177842] garmin_gps: v0.36:garmin gps driver
[    2.182776] USB Serial support registered for hp4X
[    2.187441] usbcore: registered new interface driver hp4X
[    2.194439] hp4x: v1.00:HP4x (48/49) Generic Serial driver
[    2.198154] USB Serial support registered for PocketPC PDA
[    2.203816] usbcore: registered new interface driver ipaq
[    2.208753] ipaq: v1.0:USB PocketPC PDA driver[    2.213470] USB Serial support registered for IPWireless converter
[    2.222891] usbcore: registered new interface driver ipwtty
[    2.224753] ipw: v0.4:IPWireless tty driver
[    2.229347] USB Serial support registered for IR Dongle
[    2.234817] usbcore: registered new interface driver ir-usb
[    2.239819] ir_usb: v0.5:USB IR Dongle driver
[    2.244404] USB Serial support registered for iuu_phoenix
[    2.249894] usbcore: registered new interface driver iuu_phoenix
[    2.255619] iuu_phoenix: v0.12:Infinity USB Unlimited Phoenix driver
[    2.263374] USB Serial support registered for Keyspan PDA
[    2.267531] hub 1-1:1.0: USB hub found
[    2.271070] USB Serial support registered for Keyspan PDA - (prerenumeration)
[    2.279949] hub 1-1:1.0: 4 ports detected
[    2.282855] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[    2.291120] usbcore: registered new interface driver keyspan_pda
[    2.295949] keyspan_pda: v1.1:USB Keyspan PDA Converter driver
[    2.302073] USB Serial support registered for KL5KUSB105D / PalmConnect
[    2.311898] usbcore: registered new interface driver kl5kusb105d
[    2.314230] kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
[    2.322020] USB Serial support registered for KOBIL USB smart card terminal
[    2.329089] usbcore: registered new interface driver kobil
[    2.334127] kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
[    2.342245] USB Serial support registered for MCT U232
[    2.347497] usbcore: registered new interface driver mct_u232
[    2.352780] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
[    2.360258] USB Serial support registered for Moschip 2 port adapter
[    2.366304] mos7720: 2.1:Moschip USB Serial Driver
[    2.371427] usbcore: registered new interface driver moschip7720
[    2.377362] USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[    2.384456] mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
[    2.393096] usbcore: registered new interface driver mos7840
[    2.396260] USB Serial support registered for moto-modem
[    2.401750] usbcore: registered new interface driver moto-modem
[    2.407532] USB Serial support registered for navman
[    2.415681] usbcore: registered new interface driver navman
[    2.417964] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[    2.425018] usbcore: registered new interface driver omninet
[    2.430181] omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
[    2.436154] USB Serial support registered for opticon
[    2.441325] usbcore: registered new interface driver opticon
[    2.446771] USB Serial support registered for GSM modem (1-port)
[    2.453033] usbcore: registered new interface driver option
[    2.459953] option: v0.7.2:USB Driver for GSM modems
[    2.463163] USB Serial support registered for oti6858
[    2.468403] usbcore: registered new interface driver oti6858
[    2.473929] USB Serial support registered for pl2303
[    2.478951] usbcore: registered new interface driver pl2303
[    2.485084] pl2303: Prolific PL2303 USB to serial adaptor driver
[    2.492412] USB Serial support registered for qcaux
[    2.495254] usbcore: registered new interface driver qcaux
[    2.500690] USB Serial support registered for Qualcomm USB modem
[    2.506794] usbcore: registered new interface driver qcserial
[    2.512049] safe_serial: v0.1:USB Safe Encapsulated Serial
[    2.517829] USB Serial support registered for safe_serial
[    2.523325] usbcore: registered new interface driver safe_serial
[    2.529225] USB Serial support registered for siemens_mpi
[    2.534798] usbcore: registered new interface driver siemens_mpi
[    2.540231] Driver for Siemens USB/MPI adapter
[    2.544566] Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net
[    2.552635] USB Serial support registered for Sierra USB modem
[    2.560471] usbcore: registered new interface driver sierra
[    2.563564] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[    2.570363] USB Serial support registered for SPCP8x5
[    2.575556] usbcore: registered new interface driver spcp8x5
[    2.580774] spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver
[    2.590116] USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[    2.594635] usbcore: registered new interface driver ssu100
[    2.599725] ssu100: v0.1:Quatech SSU-100 USB to Serial Driver
[    2.605748] USB Serial support registered for symbol
[    2.610841] usbcore: registered new interface driver symbol
[    2.616359] USB Serial support registered for TI USB 3410 1 port adapter
[    2.623011] USB Serial support registered for TI USB 5052 2 port adapter
[    2.629745] usbcore: registered new interface driver ti_usb_3410_5052
[    2.635737] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[    2.642187] USB Serial support registered for Handspring Visor / Palm OS
[    2.649061] USB Serial support registered for Sony Clie 3.5
[    2.654399] USB Serial support registered for Sony Clie 5.0
[    2.660055] usbcore: registered new interface driver visor
[    2.667087] visor: USB HandSpring Visor / Palm OS driver
[    2.670647] USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[    2.679069] USB Serial support registered for Connect Tech - WhiteHEAT
[    2.685561] usbcore: registered new interface driver whiteheat
[    2.691909] whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
[    2.698928] USB Serial support registered for vivopay-serial
[    2.702617] usbcore: registered new interface driver vivopay-serial
[    2.708400] vivopay_serial: v1.0:ViVOpay USB Serial Driver
[    2.714248] USB Serial support registered for zio
[    2.718955] usbcore: registered new interface driver zio
[    2.723844] Initializing USB Mass Storage driver...
[    2.729128] usbcore: registered new interface driver usb-storage
[    2.734689] USB Mass Storage support registered.
[    2.739650] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
[    2.739664] s3c-udc : version 15 March 2009 (DMA Mode)
[    2.759943] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.760013] android_usb gadget: Number of LUNs=1
[    2.764227]  lun0: LUN: removable file: (no medium)
[    2.770004] android_usb gadget: android_usb ready
[    2.789455] Registered gadget driver 'android_usb'
[    2.790462] mousedev: PS/2 mouse device common for all mice
[    2.792015] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    2.794269] touchscreen-1wire        initialized
[    2.794546] backlight-1wire  initialized
[    2.798656] setup_irq: ret = 0
[    2.801519] PWM clock = 66700000
[    2.804664] TCNT_FOR_SAMPLE_BIT = 433, TCFG1 = 00010000
[    2.810804] input: fa_ts_input as /devices/virtual/input/input1
[    2.817522] ts-if    initialized
[    2.819462] input: ft5x0x_ts as /devices/virtual/input/input2
[    2.831568] ft5x0x_ts 2-0038: Firmware version 0x07
[    2.831633] ft5x0x_ts 2-0038: FocalTech ft5x0x 4.3 TouchScreen initialized
[    2.837931] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
[    2.841742] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[    2.847128] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[    2.852451] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[    2.857894] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[    2.863324] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[    2.869904] using rtc device, s3c, for alarms
[    2.873091] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[    2.879583] i2c /dev entries driver
[    2.884795] Linux video capture interface: v2.00
[    2.887592] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
[    2.887603] 
[    2.899149] S3C JPEG Driver, (c) 2007 Samsung Electronics
[    2.900788] JPEG driver for S5PV210
[    2.905427] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
[    2.911082] S5PC11X HPD Driver, (c) 2010 Samsung Electronics
[    2.917291] S5PC11X CEC Driver, (c) 2010 Samsung Electronics
[    2.924587] usbcore: registered new interface driver uvcvideo
[    2.927652] USB Video Class driver (v1.1.0)
[    2.974203] input: mma7660 as /devices/platform/s3c2440-i2c.0/i2c-0/0-004c/input/input3
[    2.974900] mma7660 0-004c: MMA7660 device is probed successfully.
[    2.975327] i2c-core: driver [mma7660] using legacy suspend method
[    2.975390] i2c-core: driver [mma7660] using legacy resume method
[    2.978329] MMA7660 sensor driver registered.
[    2.982636] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[    2.989293] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
[    2.998556] device-mapper: uevent: version 1.0.3
[    3.002005] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    3.009296] Bluetooth: Virtual HCI driver ver 1.3
[    3.014436] Bluetooth: HCI UART driver ver 2.2
[    3.018256] Bluetooth: HCI H4 protocol initialized
[    3.023017] Bluetooth: HCI BCSP protocol initialized
[    3.027956] Bluetooth: HCILL protocol initialized
[    3.032650] Bluetooth: HCIATH3K protocol initialized
[    3.037576] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
[    3.044078] usbcore: registered new interface driver bcm203x
[    3.049294] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[    3.055706] usbcore: registered new interface driver bpa10x
[    3.060718] Bluetooth: BlueFRITZ! USB driver ver 1.2
[    3.066084] usbcore: registered new interface driver bfusb
[    3.071118] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    3.077174] usbcore: registered new interface driver btusb
[    3.082137] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[    3.088045] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[    3.093987] usbcore: registered new interface driver ath3k
[    3.099615] cpuidle: using governor ladder
[    3.103689] cpuidle: using governor menu
[    3.107670] twmulti : loaded
[    3.131617] usbcore: registered new interface driver usbhid
[    3.131677] usbhid: USB HID core driver
[    3.132964] logger: created 256K log 'log_main'
[    3.133563] logger: created 256K log 'log_events'
[    3.134150] logger: created 256K log 'log_radio'
[    3.134740] logger: created 256K log 'log_system'
[    3.141339] ALSA device list:
[    3.141379]   No soundcards found.
[    3.143903] oprofile: hardware counters not available
[    3.148928] oprofile: using timer interrupt.
[    3.153378] GACT probability NOT on
[    3.156651] Mirror/redirect action on
[    3.160283] u32 classifier
[    3.162966]     Actions configured
[    3.166351] Netfilter messages via NETLINK v0.30.
[    3.171129] nf_conntrack version 0.5.0 (6126 buckets, 24504 max)
[    3.178490] ctnetlink v0.93: registering with nfnetlink.
[    3.182358] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    3.189239] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    3.195892] xt_time: kernel timezone is -0000
[    3.201155] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.204911] arp_tables: (C) 2002 David S. Miller
[    3.209328] TCP cubic registered
[    3.214984] NET: Registered protocol family 10
[    3.223007] Mobile IPv6

[    3.223103] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.225051] IPv6 over IPv4 tunneling driver
[    3.235107] NET: Registered protocol family 17
[    3.235224] NET: Registered protocol family 15
[    3.237939] Bluetooth: RFCOMM TTY layer initialized
[    3.242539] Bluetooth: RFCOMM socket layer initialized
[    3.247632] Bluetooth: RFCOMM ver 1.11
[    3.251360] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.256648] Bluetooth: BNEP filters: protocol multicast
[    3.261846] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.268269] NET: Registered protocol family 35
[    3.272481] Registering the dns_resolver key type
[    3.276890] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[    3.284465] ThumbEE CPU extension supported.
[    3.289202] s5pv210_cpufreq_init: S5PV210 cpu-freq driver
[    3.295772] regulator_init_complete: pd_mfc_supply: disabling
[    3.299809] regulator_init_complete: pd_tv_supply: disabling
[    3.305491] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[    3.310934] s3c-rtc s3c64xx-rtc: setting system clock to 2012-01-03 13:10:43 UTC (1325596243)
[    3.322182] FIMC0 registered successfully
[    3.326868] FIMC1 registered successfully
[    3.329200] FIMC2 registered successfully
[    3.331851] S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
[    3.337921] s5p-tvout s5p-tvout: hpd status is cable removed
[    3.351204] Freeing init memory: 1456K
[    3.372782] yaffs: dev is 32505860 name is "mtdblock4" rw
[    3.372838] yaffs: passed flags ""               //一般卡再这句以后的某个地方
[   12.499860] linuxrc (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[   12.851497] init: cannot open '/initlogo.rle'
[   13.026651] dm9000 dm9000: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   13.031435] init: cannot find '/system/bin/zte_mf210_dial', disabling 'pppd_gprs'
[   13.040834] android_usb: already disabled
[   13.041520] adb_bind_config
[   13.047660] android_work: did not send uevent (0 0   (null))
[   13.159589] adb_open
[   13.319726] android_work: sent uevent USB_STATE=CONNECTED
[   13.467418] android_usb gadget: high speed config #1: android
[   13.468101] android_work: sent uevent USB_STATE=CONFIGURED
/ # [   14.995588] PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [543, drivers/gpu/pvr/s5pc110/sysconfig.c]
[   15.718445] FriendlyARM http://www.arm9.net
[   15.860465] asoc: wm8960-hifi <-> samsung-i2s.0 mapping okasoc: wm8960-hifi <-> samsung-i2s.0 mapping ok //这次卡在这个地方了
各位大哥们,有没有遇到过类似的情况,给小弟指点一二。这是什么原因呢。android一次都启动不了。    
[ 此帖被tulipper在2018-11-19 20:22重新编辑 ]