如下所示，插上SD卡以后一直出现这个情况，求解。能识别到SD卡，但是无法查看SD卡中的内容。原先是好的，后来经几次插拔就成这样了。求解。已验证，不是SD卡的问题，因为此卡在mini2440上一切正常，其他平台一切正常，而且也尝试换了好几个卡了， 问题依旧。 因为此问题导致现在刷系统都无法刷，曾想过用minitools来代替SD的刷机方式，但是得知使用minitools之前还得用SD卡来设置成USB模式。故，此方法亦是不通。
请大家帮帮忙指点一下此错误解决方法，亦或不通过SD卡来刷机的方法。 谢谢！
[ 129.896676] mmc0: new high speed SDHC card at address e624
[ 129.899068] mmcblk0: mmc0:e624 SU04G 3.69 GiB
[ 129.899553] mmcblk0:
[ 132.717154] mmcblk0: retrying using single block read
[ 135.534515] end_request: I/O error, dev mmcblk0, sector 0
[ 138.351872] end_request: I/O error, dev mmcblk0, sector 1
[ 141.169234] end_request: I/O error, dev mmcblk0, sector 2
[ 143.986564] end_request: I/O error, dev mmcblk0, sector 3
[ 146.803892] end_request: I/O error, dev mmcblk0, sector 4
[ 149.621208] end_request: I/O error, dev mmcblk0, sector 5
[ 152.438518] end_request: I/O error, dev mmcblk0, sector 6
[ 155.255834] end_request: I/O error, dev mmcblk0, sector 7
[ 155.255891] Buffer I/O error on device mmcblk0, logical block 0
[ 158.073287] mmcblk0: retrying using single block read
[ 160.890607] end_request: I/O error, dev mmcblk0, sector 0
[ 163.707916] end_request: I/O error, dev mmcblk0, sector 1
[ 166.525232] end_request: I/O error, dev mmcblk0, sector 2
[ 169.342550] end_request: I/O error, dev mmcblk0, sector 3
[ 此帖被yhq448239218在2013-07-25 15:32重新编辑 ]
