新买的开发板,触摸屏好用。
按照教程安装了linux后,校准时触摸屏没有反应,
在 Android-CommandLine 参数上加上 skipcali=yes 来跳过校准,也不好用。
使用的FriendlyARM.init文件如下,请大神门帮帮忙!
#This line cannot be removed. by FriendlyARM(
www.arm9.net)
CheckOneButton=No
Action = Install
OS = Linux
LowFormat = Yes
VerifyNandWrite = No
CheckCRC32=No
StatusType = Beeper | LED
################### Linux ####################
Linux-BootLoader = Superboot210.bin
Linux-Kernel = Linux/zImage
Linux-CommandLine = root=/dev/mtdblock4 console=ttySAC0,115200 init=/linuxrc skipcali=yes ctp=1
Linux-RootFs-InstallImage = Linux/rootfs_qtopia_qt4.img
################### Android 4.0.3 ####################
#Android-BootLoader = Superboot210.bin
#Android-Kernel = Android/zImage
#Android-CommandLine = root=/dev/mtdblock4 rootfstype=yaffs2 console=ttySAC0,115200 init=/linuxrc androidboot.console=ttySAC0 gs=0 skipcali=yes
#Android-RootFs-InstallImage = Android/rootfs_android.img
[ 此帖被jxy在2014-11-01 15:28重新编辑 ]