• «
  • 1
  • 2
  • »
  • Pages: 1/2     Go
主题 : 通过在超级终端上显示的内容,怎么分析ARM4412的运行状况? 复制链接 | 浏览器收藏 | 打印
坦然接受一段艰苦的生活,会让我们学会珍惜和感恩。
级别: 新手上路
UID: 107791
精华: 0
发帖: 6
金钱: 30 两
威望: 6 点
贡献值: 0 点
综合积分: 12 分
注册时间: 2014-09-04
最后登录: 2015-05-27
楼主  发表于: 2015-01-26 13:48

 通过在超级终端上显示的内容,怎么分析ARM4412的运行状况?

最近在玩ARM4412的开发板,然后自己做了个4412(ADK)的底板,换上之后,发现触摸屏不能用,USB口也不能用。看超级终端上说是“android_usb: already disabled”。
怎么根据超级终端上的内容分析系统的运行状况呢?望各位坛友帮忙指导指导,谢谢!
下面是超级终端显示的详细状况:

=================================================================================================

Superboot-4412 V1.6(20140317) by FriendlyARM


Booting from eMMC

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-FriendlyARM (root@tzs-friendlyarm) (gcc version 4.5.1

(ctng-1.8.1-FA) ) #1 SMP PREEMPT Tue Apr 22 18:20:33 HKT 2014
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: TINY4412
[    0.000000] TINY4412: S70 selected
[    0.000000] cma: CMA: reserved 32 MiB at 5d000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] CPU EXYNOS4412 (id 0xe4412011)
[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[    0.000000] s3c_register_clksrc: clock armclk has no registers set
[    0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
[    0.000000] audiocdclk: no parent clock specified
[    0.000000] EXYNOS4: PLL settings, A=1500000000, M=800000000, E=96000000 V=350000000
[    0.000000] EXYNOS4: ARMCLK=1500000000, DMC=400000000, ACLK200=160000000
[    0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
[    0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimd: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_jpeg: source is mout_jpeg0 (0), rate is 50000000
[    0.000000] sclk_fimg2d: source is mout_g2d0 (0), rate is 200000000
[    0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 50000000
[    0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 50000000
[    0.000000] PERCPU: Embedded 8 pages/cpu @c19ae000 s11712 r8192 d12864 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 251394
[    0.000000] Kernel command line: console=ttySAC0,115200n8 androidboot.console=ttySAC0

ctp=2 skipcali=y vmalloc=512m lcd=S70
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 384MB 607MB = 991MB total
[    0.000000] Memory: 961944k/961944k available, 85608k reserved, 539648K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07fdef0   (8152 kB)
[    0.000000]       .init : 0xc07fe000 - 0xc0830dc0   ( 204 kB)
[    0.000000]       .data : 0xc0832000 - 0xc08e0440   ( 698 kB)
[    0.000000]        .bss : 0xc08e0464 - 0xc094d770   ( 437 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:549
[    0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every

4294967291ms
[    0.045000] Calibrating delay loop... 2991.71 BogoMIPS (lpj=7479296)
[    0.045000] pid_max: default: 32768 minimum: 301
[    0.045000] Mount-cache hash table entries: 512
[    0.045000] Initializing cgroup subsys debug
[    0.045000] Initializing cgroup subsys cpuacct
[    0.045000] Initializing cgroup subsys freezer
[    0.045000] CPU: Testing write buffer coherency: ok
[    0.045000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[    0.045000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.045000] Setting up static identity map for 0x405aed68 - 0x405aedc0
[    0.045000] L310 cache controller enabled
[    0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576

B
[    0.095000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[    0.135000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[    0.175000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[    0.175000] Brought up 4 CPUs
[    0.175000] SMP: Total of 4 processors activated (11966.87 BogoMIPS).
[    0.175000] NET: Registered protocol family 16
[    0.185000] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.185000] HW revision: 0
[    0.185000] samsung-adc-v3: no platform data supplied
[    0.190000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.190000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.190000] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.190000] EXYNOS4x12 PMU Initialize
[    0.190000] EXYNOS: Initializing architecture
[    0.190000] s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk,

base 8
[    0.190000] s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk,

base 0
[    0.195000] bio: create slab <bio-0> at 0
[    0.195000] exynos_ion_heap_create: 34
[    0.195000] exynos_ion_heap_create: 34
[    0.195000] exynos_ion_heap_create: 34
[    0.195000] SCSI subsystem initialized
[    0.195000] usbcore: registered new interface driver usbfs
[    0.195000] usbcore: registered new interface driver hub
[    0.195000] usbcore: registered new device driver usb
[    0.195000] s3c-i2c s3c2440-i2c.0: slave address 0x10
[    0.195000] s3c-i2c s3c2440-i2c.0: bus frequency set to 195 KHz
[    0.195000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[    0.195000] s3c-i2c s3c2440-i2c.1: slave address 0x10
[    0.195000] s3c-i2c s3c2440-i2c.1: bus frequency set to 195 KHz
[    0.195000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[    0.195000] s3c-i2c s3c2440-i2c.2: slave address 0x10
[    0.195000] s3c-i2c s3c2440-i2c.2: bus frequency set to 97 KHz
[    0.195000] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[    0.195000] s3c-i2c s3c2440-i2c.3: slave address 0x10
[    0.195000] s3c-i2c s3c2440-i2c.3: bus frequency set to 195 KHz
[    0.195000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[    0.195000] s3c-i2c s3c2440-i2c.7: slave address 0x10
[    0.195000] s3c-i2c s3c2440-i2c.7: bus frequency set to 195 KHz
[    0.195000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[    0.195000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
[    0.195000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 390 KHz
[    0.195000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
[    0.195000] Linux media interface: v0.10
[    0.195000] Linux video capture interface: v2.00
[    0.195000] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.195000] Bluetooth: Core ver 2.16
[    0.195000] NET: Registered protocol family 31
[    0.195000] Bluetooth: HCI device and connection manager initialized
[    0.195000] Bluetooth: HCI socket layer initialized
[    0.195000] Bluetooth: L2CAP socket layer initialized
[    0.195000] Bluetooth: SCO socket layer initialized
[    0.195000] cfg80211: Calling CRDA to update world regulatory domain
[    0.195000] Switching to clocksource mct-frc
[    0.200000] NET: Registered protocol family 2
[    0.200000] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.200000] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.200000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    0.200000] TCP: Hash tables configured (established 65536 bind 65536)
[    0.200000] TCP: reno registered
[    0.200000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.200000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.200000] NET: Registered protocol family 1
[    0.200000] Trying to unpack rootfs image as initramfs...
[    0.225000] Freeing initrd memory: 656K
[    0.225000] Attached IOMMU controller to exynos4-fimc.0 device.
[    0.225000] Attached IOMMU controller to exynos4-fimc.1 device.
[    0.225000] Attached IOMMU controller to exynos4-fimc.2 device.
[    0.225000] Attached IOMMU controller to exynos4-fimc.3 device.
[    0.225000] Attached IOMMU controller to s5p-mfc-l device.
[    0.225000] Attached IOMMU controller to s5p-mfc-r device.
[    0.225000] Attached IOMMU controller to s5p-mixer device.
[    0.225000] Attached IOMMU controller to s5p-fimg2d device.
[    0.225000] Attached IOMMU controller to s5p-jpeg.0 device.
[    0.225000] platform exynos-fimc-lite.0: No SYSMMU found
[    0.225000] Attached IOMMU controller to exynos-fimc-lite.0 device.
[    0.230000] platform exynos-fimc-lite.1: No SYSMMU found
[    0.230000] Attached IOMMU controller to exynos-fimc-lite.1 device.
[    0.230000] s3c-adc samsung-adc-v4: attached adc driver
[    0.230000] Failed to declare coherent memory for MFC device (0 bytes at 0x43000000)
[    0.230000] highmem bounce pool size: 64 pages
[    0.235000] fuse init (API version 7.19)
[    0.235000] msgmni has been set to 890
[    0.235000] io scheduler noop registered
[    0.235000] io scheduler deadline registered
[    0.235000] io scheduler cfq registered (default)
[    0.250000] s3c-fb exynos4-fb.0: window 0: fb
[    0.265000] s3c-fb exynos4-fb.0: window 1: fb
[    0.280000] s3c-fb exynos4-fb.0: window 2: fb
[    0.300000] s3c-fb exynos4-fb.0: window 3: fb
[    0.315000] s3c-fb exynos4-fb.0: window 4: fb
[    0.315000] Start display and show logo
[    0.315000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
[    0.315000] dma-pl330 dma-pl330.0:     DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events

-32
[    0.320000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
[    0.320000] dma-pl330 dma-pl330.1:     DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events

-32
[    0.320000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.320000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
[    1.210000] console [ttySAC0] enabled
[    1.215000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
[    1.220000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
[    1.230000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
[    1.235000] leds    initialized
[    1.240000] pwm    initialized
[    1.240000] backlight    initialized
[    1.245000] tiny4412-adc    initialized
[    1.250000] Mali: init_mali_clock mali_clock c085de64 at 440 MHz
[    1.255000] Mali: Mali device driver loaded
[    1.260000] brd: module loaded
[    1.265000] loop: module loaded
[    1.265000] tun: Universal TUN/TAP device driver, 1.6
[    1.270000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.275000] PPP generic driver version 2.4.2
[    1.280000] PPP BSD Compression module registered
[    1.285000] PPP Deflate Compression module registered
[    1.290000] PPP MPPE Compression module registered
[    1.295000] NET: Registered protocol family 24
[    1.300000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[    1.305000] usbcore: registered new interface driver pegasus
[    1.315000] usbcore: registered new interface driver asix
[    1.320000] usbcore: registered new interface driver cdc_ether
[    1.325000] usbcore: registered new interface driver dm9601
[    1.330000] usbcore: registered new interface driver dm9620
[    1.335000] usbcore: registered new interface driver net1080
[    1.340000] usbcore: registered new interface driver cdc_subset
[    1.345000] usbcore: registered new interface driver zaurus
[    1.350000] usbcore: registered new interface driver cdc_ncm
[    1.360000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.365000] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[    1.370000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[    1.375000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
[    1.390000] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[    1.390000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.395000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.400000] usb usb1: Product: S5P EHCI Host Controller
[    1.405000] usb usb1: Manufacturer: Linux 3.5.0-FriendlyARM ehci_hcd
[    1.415000] usb usb1: SerialNumber: s5p-ehci
[    1.415000] hub 1-0:1.0: USB hub found
[    1.420000] hub 1-0:1.0: 3 ports detected
[    1.425000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.430000] exynos-ohci exynos-ohci: PHY already ON
[    1.435000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
[    1.440000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
[    1.450000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
[    1.510000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.510000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.510000] usb usb2: Product: EXYNOS OHCI Host Controller
[    1.510000] usb usb2: Manufacturer: Linux 3.5.0-FriendlyARM ohci_hcd
[    1.515000] usb usb2: SerialNumber: exynos-ohci
[    1.520000] hub 2-0:1.0: USB hub found
[    1.525000] hub 2-0:1.0: 3 ports detected
[    1.525000] Initializing USB Mass Storage driver...
[    1.530000] usbcore: registered new interface driver usb-storage
[    1.540000] USB Mass Storage support registered.
[    1.545000] usbcore: registered new interface driver usbserial
[    1.550000] usbcore: registered new interface driver usbserial_generic
[    1.555000] USB Serial support registered for generic
[    1.560000] usbserial: USB Serial Driver core
[    1.565000] usbcore: registered new interface driver aircable
[    1.570000] USB Serial support registered for aircable
[    1.575000] usbcore: registered new interface driver ark3116
[    1.580000] USB Serial support registered for ark3116
[    1.585000] usbcore: registered new interface driver belkin_sa
[    1.590000] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial

Adapter
[    1.600000] usbcore: registered new interface driver ch341
[    1.605000] USB Serial support registered for ch341-uart
[    1.610000] usbcore: registered new interface driver cp210x
[    1.615000] USB Serial support registered for cp210x
[    1.620000] usbcore: registered new interface driver cyberjack
[    1.625000] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[    1.635000] usbcore: registered new interface driver cypress_m8
[    1.640000] USB Serial support registered for DeLorme Earthmate USB
[    1.645000] USB Serial support registered for HID->COM RS232 Adapter
[    1.655000] USB Serial support registered for Nokia CA-42 V2 Adapter
[    1.660000] usbcore: registered new interface driver digi_acceleport
[    1.665000] USB Serial support registered for Digi 2 port USB adapter
[    1.670000] USB Serial support registered for Digi 4 port USB adapter
[    1.680000] usbcore: registered new interface driver io_edgeport
[    1.685000] USB Serial support registered for Edgeport 2 port adapter
[    1.690000] USB Serial support registered for Edgeport 4 port adapter
[    1.700000] USB Serial support registered for Edgeport 8 port adapter
[    1.705000] USB Serial support registered for EPiC device
[    1.710000] usbcore: registered new interface driver io_ti
[    1.715000] USB Serial support registered for Edgeport TI 1 port adapter
[    1.720000] USB Serial support registered for Edgeport TI 2 port adapter
[    1.730000] usbcore: registered new interface driver empeg
[    1.735000] USB Serial support registered for empeg
[    1.740000] usbcore: registered new interface driver f81232
[    1.745000] USB Serial support registered for f81232
[    1.750000] usbcore: registered new interface driver ftdi_sio
[    1.755000] USB Serial support registered for FTDI USB Serial Device
[    1.760000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[    1.765000] usbcore: registered new interface driver funsoft
[    1.775000] USB Serial support registered for funsoft
[    1.780000] usbcore: registered new interface driver garmin_gps
[    1.785000] USB Serial support registered for Garmin GPS usb/tty
[    1.790000] usbcore: registered new interface driver hp4x
[    1.795000] USB Serial support registered for hp4X
[    1.800000] usbcore: registered new interface driver ipaq
[    1.805000] USB Serial support registered for PocketPC PDA
[    1.810000] usbcore: registered new interface driver ipw
[    1.815000] USB Serial support registered for IPWireless converter
[    1.820000] usbcore: registered new interface driver ir_usb
[    1.825000] USB Serial support registered for IR Dongle
[    1.835000] ir_usb: v0.5:USB IR Dongle driver
[    1.835000] usbcore: registered new interface driver iuu_phoenix
[    1.845000] USB Serial support registered for iuu_phoenix
[    1.850000] usbcore: registered new interface driver keyspan
[    1.855000] USB Serial support registered for Keyspan - (without firmware)
[    1.860000] USB Serial support registered for Keyspan 1 port adapter
[    1.865000] USB Serial support registered for Keyspan 2 port adapter
[    1.875000] USB Serial support registered for Keyspan 4 port adapter
[    1.880000] usbcore: registered new interface driver keyspan_pda
[    1.885000] USB Serial support registered for Keyspan PDA
[    1.890000] USB Serial support registered for Keyspan PDA - (prerenumeration)
[    1.900000] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[    1.905000] usbcore: registered new interface driver kl5kusb105
[    1.910000] USB Serial support registered for KL5KUSB105D / PalmConnect
[    1.920000] usbcore: registered new interface driver kobil_sct
[    1.925000] USB Serial support registered for KOBIL USB smart card terminal
[    1.930000] usbcore: registered new interface driver mct_u232
[    1.935000] USB Serial support registered for MCT U232
[    1.940000] usbcore: registered new interface driver metro_usb
[    1.950000] USB Serial support registered for Metrologic USB to Serial
[    1.955000] usbcore: registered new interface driver mos7720
[    1.960000] USB Serial support registered for Moschip 2 port adapter
[    1.965000] usbcore: registered new interface driver mos7840
[    1.970000] USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[    1.980000] usbcore: registered new interface driver moto_modem
[    1.985000] USB Serial support registered for moto-modem
[    1.990000] usbcore: registered new interface driver navman
[    1.995000] USB Serial support registered for navman
[    2.000000] usbcore: registered new interface driver omninet
[    2.005000] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[    2.015000] usbcore: registered new interface driver opticon
[    2.020000] USB Serial support registered for opticon
[    2.025000] usbcore: registered new interface driver option
[    2.030000] USB Serial support registered for GSM modem (1-port)
[    2.035000] usbcore: registered new interface driver oti6858
[    2.040000] USB Serial support registered for oti6858
[    2.045000] usbcore: registered new interface driver pl2303
[    2.055000] USB Serial support registered for pl2303
[    2.060000] usbcore: registered new interface driver qcaux
[    2.065000] USB Serial support registered for qcaux
[    2.070000] usbcore: registered new interface driver qcserial
[    2.075000] USB Serial support registered for Qualcomm USB modem
[    2.080000] usbcore: registered new interface driver quatech2
[    2.085000] USB Serial support registered for Quatech 2nd gen USB to Serial Driver
[    2.095000] safe_serial: v0.1:USB Safe Encapsulated Serial
[    2.100000] usbcore: registered new interface driver safe_serial
[    2.105000] USB Serial support registered for safe_serial
[    2.110000] usbcore: registered new interface driver siemens_mpi
[    2.115000] USB Serial support registered for siemens_mpi
[    2.120000] usbcore: registered new interface driver sierra
[    2.125000] USB Serial support registered for Sierra USB modem
[    2.130000] usbcore: registered new interface driver spcp8x5
[    2.140000] USB Serial support registered for SPCP8x5
[    2.145000] usbcore: registered new interface driver ssu100
[    2.150000] USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[    2.155000] usbcore: registered new interface driver symbolserial
[    2.160000] USB Serial support registered for symbol
[    2.165000] usbcore: registered new interface driver ti_usb_3410_5052
[    2.175000] USB Serial support registered for TI USB 3410 1 port adapter
[    2.180000] USB Serial support registered for TI USB 5052 2 port adapter
[    2.185000] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[    2.195000] usbcore: registered new interface driver visor
[    2.200000] USB Serial support registered for Handspring Visor / Palm OS
[    2.205000] USB Serial support registered for Sony Clie 5.0
[    2.210000] USB Serial support registered for Sony Clie 3.5
[    2.215000] usbcore: registered new interface driver whiteheat
[    2.220000] USB Serial support registered for Connect Tech - WhiteHEAT -

(prerenumeration)
[    2.230000] USB Serial support registered for Connect Tech - WhiteHEAT
[    2.235000] usbcore: registered new interface driver vivopay_serial
[    2.245000] USB Serial support registered for vivopay-serial
[    2.250000] usbcore: registered new interface driver zio
[    2.255000] USB Serial support registered for zio
[    2.260000] s3c-hsotg s3c-hsotg: regs dfd00000, irq 103
[    2.265000] s3c-hsotg s3c-hsotg: PHY already ON
[    2.270000] s3c-hsotg s3c-hsotg: EPs:15
[    2.270000] s3c-hsotg s3c-hsotg: dedicated fifos
[    2.275000] s3c-hsotg s3c-hsotg: still being used
[    2.280000] file system registered
[    2.285000]  gadget: Mass Storage Function, version: 2009/09/11
[    2.290000]  gadget: Number of LUNs=1
[    2.295000]  lun0: LUN: removable file: (no medium)
[    2.300000]  gadget: android_usb ready
[    2.305000] s3c-hsotg s3c-hsotg: bound driver android_usb
[    2.310000] s3c-hsotg s3c-hsotg: PHY already ON
[    2.315000] s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst
[    2.320000] s3c-hsotg s3c-hsotg: still being used
[    2.325000] mousedev: PS/2 mouse device common for all mice
[    2.330000] usbcore: registered new interface driver xpad
[    2.335000] input: ft5x0x_ts as /devices/virtual/input/input0
[    2.350000] read reg (0xa6) error, -6
[    2.350000] ft5x0x_ts 1-0038: chip not found
[    2.375000] ft5x0x_ts 1-0038: probe ft5x0x TouchScreen failed, -6
[    2.375000] touchscreen-1wire    initialized
[    2.375000] backlight-1wire    initialized
[    2.375000] setup_irq: ret = 0
[    2.375000] PWM clock = 100000000
[    2.375000] TCNT_FOR_SAMPLE_BIT = 650, TCFG1 = 00010004
[    2.375000] input: fa_ts_input as /devices/virtual/input/input1
[    2.380000] ts-if    initialized
[    2.385000] wake enabled for irq 442
[    2.390000] wake enabled for irq 443
[    2.390000] wake enabled for irq 444
[    2.395000] wake enabled for irq 445
[    2.400000] GPIO Input Driver: Start gpio inputs for tiny4412-key in interrupt mode
[    2.405000] input: tiny4412-key as /devices/virtual/input/input2
[    2.415000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[    2.420000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[    2.425000] 2: TCNTB=0000028a, TCNTO=0000018b, TINT_CSTAT=00000008
[    2.430000] s3c-rtc s3c64xx-rtc: warning: invalid RTC value so initializing it
[    2.435000] i2c /dev entries driver
[    2.440000] lirc_dev: IR Remote Control driver registered, major 250
[    2.445000] IR NEC protocol handler initialized
[    2.450000] IR RC5(x) protocol handler initialized
[    2.455000] IR RC6 protocol handler initialized
[    2.460000] IR JVC protocol handler initialized
[    2.465000] IR Sony protocol handler initialized
[    2.470000] IR RC5 (streamzap) protocol handler initialized
[    2.475000] 4: TCNTB=0000028a, TCNTO=0000026c, TINT_CSTAT=00000008
[    2.480000] IR SANYO protocol handler initialized
[    2.485000] IR LIRC bridge handler initialized
[    2.490000] Registered IR keymap rc-empty
[    2.495000] input: gpio_ir_recv as /devices/virtual/rc/rc0/input3
[    2.500000] rc0: gpio_ir_recv as /devices/virtual/rc/rc0
[    2.505000] rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor =

0
[    2.515000] gspca_main: v2.14.0 registered
[    2.520000] usbcore: registered new interface driver benq
[    2.525000] usbcore: registered new interface driver conex
[    2.530000] usbcore: registered new interface driver cpia1
[    2.535000] usbcore: registered new interface driver etoms
[    2.540000] usbcore: registered new interface driver finepix
[    2.545000] usbcore: registered new interface driver jeilinj
[    2.550000] usbcore: registered new interface driver jl2005bcd
[    2.560000] usbcore: registered new interface driver kinect
[    2.565000] usbcore: registered new interface driver konica
[    2.570000] usbcore: registered new interface driver mars
[    2.575000] usbcore: registered new interface driver mr97310a
[    2.580000] usbcore: registered new interface driver nw80x
[    2.585000] usbcore: registered new interface driver ov519
[    2.590000] usbcore: registered new interface driver ov534
[    2.595000] usbcore: registered new interface driver ov534_9
[    2.600000] usbcore: registered new interface driver pac207
[    2.605000] usbcore: registered new interface driver gspca_pac7302
[    2.615000] usbcore: registered new interface driver pac7311
[    2.620000] usbcore: registered new interface driver se401
[    2.625000] usbcore: registered new interface driver sn9c2028
[    2.630000] usbcore: registered new interface driver gspca_sn9c20x
[    2.635000] usbcore: registered new interface driver sonixb
[    2.640000] usbcore: registered new interface driver sonixj
[    2.650000] usbcore: registered new interface driver spca500
[    2.655000] usbcore: registered new interface driver spca501
[    2.660000] usbcore: registered new interface driver spca505
[    2.665000] usbcore: registered new interface driver spca506
[    2.670000] usbcore: registered new interface driver spca508
[    2.675000] usbcore: registered new interface driver spca561
[    2.680000] usbcore: registered new interface driver spca1528
[    2.685000] usbcore: registered new interface driver sq905
[    2.695000] usbcore: registered new interface driver sq905c
[    2.700000] usbcore: registered new interface driver sq930x
[    2.705000] usbcore: registered new interface driver sunplus
[    2.710000] usbcore: registered new interface driver stk014
[    2.715000] usbcore: registered new interface driver stv0680
[    2.720000] usbcore: registered new interface driver t613
[    2.725000] usbcore: registered new interface driver gspca_topro
[    2.730000] usbcore: registered new interface driver tv8532
[    2.740000] usbcore: registered new interface driver vc032x
[    2.745000] usbcore: registered new interface driver vicam
[    2.750000] usbcore: registered new interface driver xirlink-cit
[    2.755000] usbcore: registered new interface driver gspca_zc3xx
[    2.760000] usbcore: registered new interface driver ALi m5602
[    2.765000] usbcore: registered new interface driver STV06xx
[    2.770000] usbcore: registered new interface driver gspca_gl860
[    2.805000] FIMC-IS probe completed
[    2.805000] [INFO]flite_probe:756: fimc-lite0 probe success
[    2.805000] [INFO]flite_probe:756: fimc-lite1 probe success
[    2.805000] s5p-fimc-md: Registered fimc.0.m2m as /dev/video0
[    2.805000] s5p-fimc-md: Registered fimc.0.capture as /dev/video1
[    2.810000] s5p-fimc-md: Registered fimc.1.m2m as /dev/video2
[    2.815000] s5p-fimc-md: Registered fimc.1.capture as /dev/video3
[    2.820000] s5p-fimc-md: Registered fimc.2.m2m as /dev/video4
[    2.830000] s5p-fimc-md: Registered fimc.2.capture as /dev/video5
[    2.835000] s5p-fimc-md: Registered fimc.3.m2m as /dev/video6
[    2.840000] s5p-fimc-md: Registered fimc.3.capture as /dev/video7
[    2.845000] s5p-mfc s5p-mfc: decoder registered as /dev/video8
[    2.850000] s5p-mfc s5p-mfc: encoder registered as /dev/video9
[    2.860000] HDMI unplugged
[    2.860000] s5p-hdmiphy 8-0038: probe successful
[    2.865000] s5p-hdmi exynos4-hdmi: probe successful
[    2.870000] i2c i2c-7: attached s5p_ddc into i2c adapter successfully
[    2.875000] i2c-core: driver [s5p_ddc] using legacy suspend method
[    2.880000] i2c-core: driver [s5p_ddc] using legacy resume method
[    2.890000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
[    2.895000] s5p-mixer s5p-mixer: probe start
[    2.900000] s5p-mixer s5p-mixer: resources acquired
[    2.905000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-

hdmi'
[    2.915000] s5p-mixer s5p-mixer: module s5p-sdo is missing
[    2.920000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video10
[    2.925000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video11
[    2.930000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video12
[    2.940000] s5p-mixer s5p-mixer: probe successful
[    2.945000] Initialize JPEG driver
[    2.945000] s5p-jpeg s5p-jpeg.0: JPEG driver is registered to /dev/video13
[    2.955000] Exynos Graphics 2D driver, (c) 2011 Samsung Electronics
[    2.960000] [fimg2d_probe] base address: 0x10800000
[    2.965000] [fimg2d_probe] irq: 121
[    2.970000] [fimg2d_clk_setup] parent clk: mout_g2d0
[    2.975000] [fimg2d_clk_setup] sclk: sclk_fimg2d
[    2.980000] [fimg2d_clk_setup] clkrate: 200000000 parent clkrate: 800000000
[    2.985000] [fimg2d_clk_setup] gate clk: fimg2d
[    2.990000] [fimg2d_probe] enable runtime pm
[    2.995000] [fimg2d_probe] sysmmu disabled for fimg2d
[    3.000000] usbcore: registered new interface driver uvcvideo
[    3.005000] USB Video Class driver (1.1.1)
[    3.010000] samsung-fake-battery samsung-fake-battery: samsung_fake_bat_probe
[    3.035000] mma7660 3-004c: no device
[    3.035000] i2c-core: driver [mma7660] using legacy suspend method
[    3.035000] i2c-core: driver [mma7660] using legacy resume method
[    3.035000] MMA7660 sensor driver registered.
[    3.035000] Exynos: Kernel Thermal management registered
[    3.040000] s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[    3.050000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
[    3.055000] device-mapper: uevent: version 1.0.3
[    3.060000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-

devel@redhat.com
[    3.070000] Bluetooth: Virtual HCI driver ver 1.3
[    3.075000] Bluetooth: HCI UART driver ver 2.2
[    3.080000] Bluetooth: HCI H4 protocol initialized
[    3.080000] Bluetooth: HCI BCSP protocol initialized
[    3.085000] Bluetooth: HCILL protocol initialized
[    3.090000] usbcore: registered new interface driver bcm203x
[    3.100000] usbcore: registered new interface driver bpa10x
[    3.105000] usbcore: registered new interface driver bfusb
[    3.110000] usbcore: registered new interface driver btusb
[    3.115000] cpuidle: using governor ladder
[    3.120000] cpuidle: using governor menu
[    3.120000] sdhci: Secure Digital Host Controller Interface driver
[    3.130000] sdhci: Copyright(c) Pierre Ossman
[    3.135000] Synopsys Designware Multimedia Card Interface Driver
[    3.140000] dw_mmc dw_mmc: Using internal DMA controller.
[    3.175000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual

396825HZ div = 63)
[    3.175000] dw_mmc dw_mmc: Version ID is 240a
[    3.175000] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128

deep fifo
[    3.175000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (100000000 Hz)
[    3.215000] mmc1: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
[    3.215000] s3c-sdhci exynos4-sdhci.3: clock source 2: mmc_busclk.2 (100000000 Hz)
[    3.220000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual

50000000HZ div = 0)
[    3.220000] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual

50000000HZ div = 1)
[    3.225000] mmc0: new high speed DDR MMC card at address 0001
[    3.230000] mmcblk0: mmc0:0001 M8G1WA 7.28 GiB
[    3.235000] mmcblk0boot0: mmc0:0001 M8G1WA partition 1 2.00 MiB
[    3.240000] mmcblk0boot1: mmc0:0001 M8G1WA partition 2 2.00 MiB
[    3.245000] mmc2: SDHCI controller on samsung-hsmmc [exynos4-sdhci.3] using ADMA
[    3.245000] usbcore: registered new interface driver usbhid
[    3.245000] usbhid: USB HID core driver
[    3.265000] ashmem: initialized
[    3.265000]  mmcblk0: p1 p2 p3 p4
[    3.265000]  mmcblk0boot1: unknown partition table
[    3.265000]  mmcblk0boot0: unknown partition table
[    3.280000] logger: created 256K log 'log_main'
[    3.285000] logger: created 256K log 'log_events'
[    3.290000] logger: created 256K log 'log_radio'
[    3.295000] logger: created 256K log 'log_system'
[    3.300000] Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
[    3.305000] audss_init: RCLK SRC[busclk]
[    3.310000] Samsung SRP driver, (c)2011 Samsung Electronics
[    3.315000] GACT probability NOT on
[    3.320000] Mirror/redirect action on
[    3.320000] u32 classifier
[    3.325000]     Actions configured
[    3.325000] Netfilter messages via NETLINK v0.30.
[    3.330000] nf_conntrack version 0.5.0 (15552 buckets, 62208 max)
[    3.340000] ctnetlink v0.93: registering with nfnetlink.
[    3.345000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    3.350000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    3.355000] xt_time: kernel timezone is -0000
[    3.360000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.365000] arp_tables: (C) 2002 David S. Miller
[    3.370000] TCP: cubic registered
[    3.375000] Initializing XFRM netlink socket
[    3.380000] NET: Registered protocol family 10
[    3.385000] mip6: Mobile IPv6
[    3.385000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.390000] sit: IPv6 over IPv4 tunneling driver
[    3.395000] NET: Registered protocol family 17
[    3.400000] NET: Registered protocol family 15
[    3.405000] Bluetooth: RFCOMM TTY layer initialized
[    3.410000] Bluetooth: RFCOMM socket layer initialized
[    3.415000] Bluetooth: RFCOMM ver 1.11
[    3.420000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.425000] Bluetooth: BNEP filters: protocol multicast
[    3.430000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.435000] NET: Registered protocol family 35
[    3.440000] EXYNOS4X12: Adaptive Support Voltage init
[    3.445000] EXYNOS4X12(SG): ORIG : 3 MOD : 0 RESULT : 3
[    3.450000] EXYNOS: Fail to get HPM Value
[    3.455000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    3.460000] ThumbEE CPU extension supported.
[    3.465000] Registering SWP/SWPB emulation handler
[    3.470000] [ 6 ] Memory Type Undertermined.
[    3.475000] DVFS : VDD_INT Voltage table set with 0 Group
[    3.505000] Failed to init busfreq.
[    3.505000] s3c-rtc s3c64xx-rtc: setting system clock to 2013-01-01 12:00:01 UTC

(1357041601)
[    3.505000] hotplug_policy_init: intialised with policy : DVFS_NR_BASED_HOTPLUG
[    3.505000] ALSA device list:
[    3.505000]   No soundcards found.
[    3.505000] Freeing init memory: 200K
[    3.510000] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj

instead.
[    3.680000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.695000] EXT4-fs (mmcblk0p4): warning: maximal mount count reached, running e2fsck is

recommended
[    3.695000] EXT4-fs (mmcblk0p4): recovery complete
[    3.695000] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts:

nomblk_io_submit,errors=panic
[    3.845000] EXT4-fs (mmcblk0p3): recovery complete
[    3.845000] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts:

nomblk_io_submit,noauto_da_alloc,errors=panic
[    3.925000] init: cannot find '/system/etc/install-recovery.sh', disabling

'flash_recovery'
[    3.925000] android_usb: already disabled
[    3.925000] android_usb: already disabled
[    3.930000] adb_open
[    3.930000] mtp_bind_config
[    3.930000] adb_bind_config
[    3.930000] s3c-hsotg s3c-hsotg: PHY already ON
[    3.935000] s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst
shell@android:/ $ [    4.000000] FriendlyARM http://www.arm9.net
[    4.000000] wm8960-codec 0-001a: Failed to issue reset
[    4.000000] wm8960-codec 0-001a: asoc: failed to probe CODEC wm8960-codec.0-001a: -6
[    4.000000] asoc: failed to instantiate card tiny4412: -6
[    4.000000] tiny4412-audio tiny4412-audio: snd_soc_register_card() failed:-6
[    4.075000] rtw driver version=v3.4.4_4749.20121105
[    4.075000] Build at: Sep  5 2013 11:49:58
[    4.075000] usbcore: registered new interface driver rtl8192cu
[    4.090000] warning: `rild' uses 32-bit capabilities (legacy support in use)
[    5.485000] Mali: :::exynos4_result_of_asv : 3
[    5.485000] Mali: mali_dvfs[0].vol = 900000
[    5.485000] Mali: :::exynos4_result_of_asv : 3
[    5.485000] Mali: mali_dvfs[1].vol = 925000
[    5.485000] Mali: :::exynos4_result_of_asv : 3
[    5.485000] Mali: mali_dvfs[2].vol = 1000000
[    5.485000] Mali: :::exynos4_result_of_asv : 3
[    5.490000] Mali: mali_dvfs[3].vol = 1050000
[   12.310000] acc_open
[   12.310000] acc_release
[   15.515000] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit
[   22.215000] init: untracked pid 1304 exited
级别: 新手上路
UID: 116273
精华: 0
发帖: 9
金钱: 55 两
威望: 11 点
贡献值: 0 点
综合积分: 18 分
注册时间: 2015-06-12
最后登录: 2016-04-17
1楼  发表于: 2015-06-19 22:37
帮你顶一下,路过;
级别: 新手上路
UID: 117653
精华: 0
发帖: 5
金钱: 25 两
威望: 5 点
贡献值: 0 点
综合积分: 10 分
注册时间: 2015-07-23
最后登录: 2018-04-19
2楼  发表于: 2015-08-02 20:40
为什么我在超级终端上什么都看不到?倒是终端和板子可以通过串口互相发送信息,疑惑中,搞不定中。。
级别: 风云使者
UID: 39598
精华: 0
发帖: 2713
金钱: 84685 两
威望: 16937 点
贡献值: 0 点
综合积分: 5426 分
注册时间: 2011-03-10
最后登录: 2017-07-08
3楼  发表于: 2017-07-07 01:29
一楼的位置好啊..
级别: 风云使者
UID: 43453
精华: 0
发帖: 2712
金钱: 84640 两
威望: 16928 点
贡献值: 0 点
综合积分: 5424 分
注册时间: 2011-04-17
最后登录: 2017-09-24
4楼  发表于: 2017-07-07 04:12
我也来顶一下..
级别: 风云使者
UID: 39598
精华: 0
发帖: 2713
金钱: 84685 两
威望: 16937 点
贡献值: 0 点
综合积分: 5426 分
注册时间: 2011-03-10
最后登录: 2017-07-08
5楼  发表于: 2017-07-07 07:27
晕  不信啊
级别: 风云使者
UID: 39598
精华: 0
发帖: 2713
金钱: 84685 两
威望: 16937 点
贡献值: 0 点
综合积分: 5426 分
注册时间: 2011-03-10
最后登录: 2017-07-08
6楼  发表于: 2017-07-07 09:47
呵呵,支持一下哈
级别: 风云使者
UID: 39598
精华: 0
发帖: 2713
金钱: 84685 两
威望: 16937 点
贡献值: 0 点
综合积分: 5426 分
注册时间: 2011-03-10
最后登录: 2017-07-08
7楼  发表于: 2017-07-07 15:47
太美了
级别: 风云使者
UID: 133552
精华: 0
发帖: 2682
金钱: 13410 两
威望: 2682 点
贡献值: 0 点
综合积分: 5364 分
注册时间: 2017-07-06
最后登录: 2017-07-11
8楼  发表于: 2017-07-07 18:21
我呆了
级别: 风云使者
UID: 133551
精华: 0
发帖: 2689
金钱: 13445 两
威望: 2689 点
贡献值: 0 点
综合积分: 5378 分
注册时间: 2017-07-06
最后登录: 2017-07-08
9楼  发表于: 2017-07-07 21:43
都是水何必装纯,都是狼何必装羊?
  • «
  • 1
  • 2
  • »
  • Pages: 1/2     Go