NanoPC-T1的usb摄像头驱动何时可以加载？

不想用C270，太大了。你们原本那个小的usb摄像头怎么没出来？即使没出来，也要加上驱动呀。

今天用博航拿到的那个摄像头插上了，看到Uart的输出信息如下，怎么感觉已经有驱动了呢。而且在Dev里面看到了Video15这个文件产生了。
[ 1306.045000] usb 1-2.3: new high-speed USB device number 7 using s5p-ehci
[ 1306.155000] usb 1-2.3: New USB device found, idVendor=090c, idProduct=71b3
[ 1306.155000] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1306.155000] usb 1-2.3: Product: USB 2.0 PC Cam
[ 1306.155000] usb 1-2.3: Manufacturer: Image Processor
[ 1306.165000] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (090c:71b3)
[ 1306.170000] input: USB 2.0 PC Cam as /devices/platform/s5p-ehci/usb1/1-2/1-2.3/1-2.3:1.0/input/input7

我从你们北京总代博航拿了一个小摄像头，说是可以在Smart210上无驱使用，结果在nanoPC-T1上怎么都不能用。。

今天我用uart看了看摄像头插入后的信息，拷贝如下，还请帮忙看看：
[ 1306.045000] usb 1-2.3: new high-speed USB device number 7 using s5p-ehci
[ 1306.155000] usb 1-2.3: New USB device found, idVendor=090c, idProduct=71b3
[ 1306.155000] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1306.155000] usb 1-2.3: Product: USB 2.0 PC Cam
[ 1306.155000] usb 1-2.3: Manufacturer: Image Processor
[ 1306.165000] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (090c:71b3)
[ 1306.170000] input: USB 2.0 PC Cam as /devices/platform/s5p-ehci/usb1/1-2/1-2.3/1-2.3:1.0/input/input7