• «
  • 1
  • 2
  • »
  • Pages: 2/2     Go
主题 : superboot  烧入sd卡无法运行 复制链接 | 浏览器收藏 | 打印
自由,自强,共享,共创。
级别: 论坛版主
UID: 12573
精华: 27
发帖: 8838
金钱: 46490 两
威望: 9298 点
贡献值: 27 点
综合积分: 18216 分
注册时间: 2010-01-09
最后登录: 2019-07-16
10楼  发表于: 2010-11-16 18:02

 Re:superboot 烧入sd卡无法运行

有可能是接触问题,使用小卡+卡套常会遇到类似问题。
新手如何向我们反馈有效的信息,以便解决问题,见此贴:
http://www.arm9home.net/read.php?tid-14431.html

[注]: 此处签名链接仅为指引方向,而非解答问题本身.
级别: 新手上路
UID: 34899
精华: 0
发帖: 3
金钱: 15 两
威望: 3 点
贡献值: 0 点
综合积分: 6 分
注册时间: 2010-12-22
最后登录: 2012-03-10
11楼  发表于: 2010-12-25 19:26

 Re:superboot 烧入sd卡无法运行

我来自香港的,同样不能用SD启动Win CE系统:
I have tried the following SD and Superboot did not respond:
1. Toshiba Micro SD 8G
2. SanDisk SDHC Card 8G
In the instruction manual for ARM11 (6410) on DVD, vendor
suggests SD storage size should be greater than 4G especially
for large OS image like Ubuntu.
There was no sound from the buzzer and LEDs did not blink at
all (in sequence) and there was no "Windows CE6 download logo"
image displayed. Is it possible that you can ask them to give you
the Superboot binary that can boot under Windows XP and I will try
to compare the two binaries (one comes with DVD and the one that
works under Windows XP for 6410) in Linux if possible. By the way,
the Superboot on DVD dated 20101117.
自由,自强,共享,共创。
级别: 论坛版主
UID: 12573
精华: 27
发帖: 8838
金钱: 46490 两
威望: 9298 点
贡献值: 27 点
综合积分: 18216 分
注册时间: 2010-01-09
最后登录: 2019-07-16
12楼  发表于: 2010-12-25 20:06

 Re:Re:superboot 烧入sd卡无法运行

引用第11楼tecbook于2010-12-25 19:26发表的 Re:superboot 烧入sd卡无法运行 :
我来自香港的,同样不能用SD启动Win CE系统:
I have tried the following SD and Superboot did not respond:
1. Toshiba Micro SD 8G
2. SanDisk SDHC Card 8G
In the instruction manual for ARM11 (6410) on DVD, vendor
.......

请使用外接的USB读卡器烧写试试。
新手如何向我们反馈有效的信息,以便解决问题,见此贴:
http://www.arm9home.net/read.php?tid-14431.html

[注]: 此处签名链接仅为指引方向,而非解答问题本身.
级别: 新手上路
UID: 34899
精华: 0
发帖: 3
金钱: 15 两
威望: 3 点
贡献值: 0 点
综合积分: 6 分
注册时间: 2010-12-22
最后登录: 2012-03-10
13楼  发表于: 2010-12-27 20:19

 Re:superboot 烧入sd卡无法运行

你好。 我们换了2张SD卡都不行。
请发最新版的superboot--xxxx.bin 给我。我现在是使用superboot-20101117.bin。
tecbook@yahoo.com.hk

谢谢
级别: 新手上路
UID: 34899
精华: 0
发帖: 3
金钱: 15 两
威望: 3 点
贡献值: 0 点
综合积分: 6 分
注册时间: 2010-12-22
最后登录: 2012-03-10
14楼  发表于: 2010-12-29 19:36

 Re:superboot 烧入sd卡无法运行

我的硬件: mini6410+7"屏+RAM:256MB+1GBFlash ,触屏型号:LCD-A70i.
我以8GB SD卡成功安装Linux和Android到NandFlash,可启动和正常使用。但是在按装WindowsCE6时,可以成功安装到Nandflash, 可以用鼠标控制,设置指针校正时,不能操作。
当中使用的系统影象文件是NK_A70.bin, 2010年11月19日, 下午 08:02:24(光盘日期)。配置文件ini如下:
#This line cannot be removed. by FriendlyARM(www.arm9.net)

CheckOneButton=No
Action=Install
OS=CE6

VerifyNandWrite=No
StatusType = Beeper| LED

################### WindowsCE6 #################
WindowsCE6-Bootloader= WindowsCE6\NBOOT_A70-RAM256.nb0
WindowsCE6-BootLogo = WindowsCE6\bootlogo.bmp
WindowsCE6-InstallImage = WindowsCE6\NK_A70.bin
#WindowsCE6-RunImage = WindowsCE6\NK_A70.bin

因为以上的做法不能设置笔针校下和使用屏屏,你建议说触屏型号是LCD-A70i.所以必须使用NK_A70-i.bin(2010年11月19日, 下午 07:42:56), 所以配置ini文件改为:
#This line cannot be removed. by FriendlyARM(www.arm9.net)

CheckOneButton=No
Action=Install
OS=CE6

VerifyNandWrite=No
StatusType = Beeper| LED

################### WindowsCE6 #################
WindowsCE6-Bootloader= WindowsCE6\NBOOT_A70-RAM256.nb0
WindowsCE6-BootLogo = WindowsCE6\bootlogo.bmp
WindowsCE6-InstallImage = WindowsCE6\NK_A70-i.bin
#WindowsCE6-RunImage = WindowsCE6\NK_A70-i.bin
按此配置,SD的CE6安装过程正常,即有BEEP响声及LED灯依序点亮及最后BEEP,BEEP响了2声,CE6应该已安装到NANDFlash中,所以S2调到以NANDFlash启动,启动画面出现了(即有地球的图片及进度条),但是看不到系统正常启动的画面。
请指正!!
  • «
  • 1
  • 2
  • »
  • Pages: 2/2     Go