我是mini2440 启动eclipse调试出现下面这个怎么办呢？没有进入Debug界面
target remote localhost:2331
putpkt: write failed: \346\226\255\345\274\200\347\232\204\347\256\241\351\201\223.
Remote debugging using localhost:2331
monitor endian little
"monitor" command not supported by this target.
monitor speed 30
"monitor" command not supported by this target.
monitor reset
"monitor" command not supported by this target.
monitor sleep 10
"monitor" command not supported by this target.
monitor reg cpsr = 0xd3
"monitor" command not supported by this target.
monitor cp15 7, 7, 0, 0 = 0x0
"monitor" command not supported by this target.
monitor cp15 8, 7, 0, 0 = 0x0
"monitor" command not supported by this target.
monitor cp15 1, 0, 0, 0 =0x1002
"monitor" command not supported by this target.
monitor cp15 15, 2, 0, 4 = 0x70000013
"monitor" command not supported by this target.
monitor MemU32 0x53000000 = 0x00000000
"monitor" command not supported by this target.
monitor sleep 10
"monitor" command not supported by this target.
monitor MemU32 0x4A000008 = 0xffffffff
"monitor" command not supported by this target.
monitor MemU32 0x4A00001C = 0x7fff
"monitor" command not supported by this target.
monitor MemU32 0x4C000000 = 0xFF000000
"monitor" command not supported by this target.
monitor MemU32 0x4C000014 = 0x5 #CLKDVIN_400_148
"monitor" command not supported by this target.
monitor MemU32 0x4C000004 = 0x7f021 #default clock
"monitor" command not supported by this target.
monitor MemU32 0x53000000 0x00000000
"monitor" command not supported by this target.
monitor MemU32 0x4A000008 0xFFFFFFFF
"monitor" command not supported by this target.
monitor MemU32 0x4A00001C 0x000007FF
"monitor" command not supported by this target.
monitor MemU32 0x53000000 0x00000000
"monitor" command not supported by this target.
monitor MemU32 0x56000050 0x000055AA
"monitor" command not supported by this target.
monitor MemU32 0x4C000014 0x00000007
"monitor" command not supported by this target.
monitor MemU32 0x4C000000 0x00FFFFFF
"monitor" command not supported by this target.
monitor MemU32 0x4C000004 0x00061012
"monitor" command not supported by this target.
monitor MemU32 0x4C000008 0x00040042
"monitor" command not supported by this target.
monitor MemU32 0x48000000 0x22111120
"monitor" command not supported by this target.
monitor MemU32 0x48000004 0x00002F50
"monitor" command not supported by this target.
monitor MemU32 0x48000008 0x00000700
"monitor" command not supported by this target.
monitor MemU32 0x4800000C 0x00000700
"monitor" command not supported by this target.
monitor MemU32 0x48000010 0x00000700
"monitor" command not supported by this target.
monitor MemU32 0x48000014 0x00000700
"monitor" command not supported by this target.
monitor MemU32 0x48000018 0x0007FFFC
"monitor" command not supported by this target.
monitor MemU32 0x4800001C 0x00018005
"monitor" command not supported by this target.
monitor MemU32 0x48000020 0x00018005
"monitor" command not supported by this target.
monitor MemU32 0x48000024 0x008E0459
"monitor" command not supported by this target.
monitor MemU32 0x48000028 0x00000032
"monitor" command not supported by this target.
monitor MemU32 0x4800002C 0x00000030
"monitor" command not supported by this target.
monitor MemU32 0x48000030 0x00000030
"monitor" command not supported by this target.
monitor speed auto
"monitor" command not supported by this target.
break _start
Breakpoint 1 at 0x30008004: file start.S, line 5.
load
You can't do that when your target is `exec'
问题出现在哪里？
[root@localhost JLink_Linux_V434a]# ./JLinkGDBServer
SEGGER J-Link GDB Server V4.34a
JLinkARM.dll V4.34a (DLL compiled Aug 31 2011 11:51:40)
Listening on TCP/IP port 2331
J-Link connected
Firmware: J-Link ARM V8 compiled Dec 6 2011 18:57:44
Hardware: V8.00
S/N: 308622870
Feature(s): RDI,FlashDL,FlashBP,JFlash,GDBFULL
端口号是的
