我使用的开发板是tiny6410核心板加Easykit简易底板,256M RAM,MLC 2G Nandflash, N43 LCD
superboot安装Linux串口输出如下:
复制代码-
- Superboot-6410
- Ver: 1134
- CPU: S3C6410 533MHz
- RAM: 256MB
- NAND: 2GB(MLC2) ID:ECD58472
- Touch Device: 1-wire
- LCD Type: N43(Auto)
- Installing OS 'LINUX'
- Installing bootloader...
- file: /images/superboot-20110826.bin: 520 KB(532480 Byte)
- Installing bootloader succeed
- Installing kernel...
- file: /images/Linux/zImage_n43: 3 MB(3763320 Byte)
- Installing kernel succeed
- Installing ubifs-image...
- file: /images/Linux/rootfs_qtopia_qt4-mlc2.ubi: 163 MB(170917888 Byte)
- Installing ubifs-image succeed
- OS 'LINUX' Installed
|
配置文件使用的是
复制代码- #This line cannot be removed. by FriendlyARM(www.arm9.net)
- LCD-Mode = Yes
- LCD-Type = N43
- CheckOneButton=No
- Action=install
- OS= Linux
- VerifyNandWrite=No
- StatusType = Beeper| LED
- #################### Linux #####################
- Linux-BootLoader = superboot-20110826.bin
- Linux-Kernel = Linux/zImage_n43
- Linux-CommandLine = root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs init=/linuxrc console=ttySAC0,115200
- Linux-RootFs-InstallImage = Linux/rootfs_qtopia_qt4-mlc2.ubi
- Linux-RootFs-RunImage = Linux/rootfs_qtopia_qt4.ext3
- ################### Android ####################
- Android-BootLoader = superboot-20110826.bin
- Android-Kernel = Android/azImage_n43
- Android-CommandLine = root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs init=/linuxrc console=ttySAC0,115200 androidboot.console=s3c2410_serial0
- Android-RootFs-InstallImage = Android/rootfs_android-mlc2.ubi
- Android-RootFs-RunImage = Android/rootfs_android.ext3
- ################### WindowsCE6 #################
- WindowsCE6-Bootloader= superboot-20110826.bin
- WindowsCE6-BootLogo = WindowsCE6\bootlogo.bmp
- WindowsCE6-InstallImage = WindowsCE6\NK_n43-i.bin
- WindowsCE6-RunImage = WindowsCE6\NK_n43-i.bin
- #################### Ubuntu #####################
- Ubuntu-BootLoader = superboot-20110826.bin
- Ubuntu-Kernel = Ubuntu/uzImage_n43
- Ubuntu-CommandLine = root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs init=/linuxrc console=ttySAC0,115200
- Ubuntu-RootFs-InstallImage = Ubuntu/rootfs_ubuntu-mlc2.ubi
- Ubuntu-RootFs-RunImage = Ubuntu/rootfs_ubuntu.ext3
- ############### UserBin #################
- UserBin-Image=WindowsCE/NK_n43-i.nb0
- userBin-StartAddress=50100000
|
文件系统路径F:\images\Linux\rootfs_qtopia_qt4-mlc2.ubi
superboot版本superboot-20110826.bin
出现的问题是切换到Nandflash启动后串口输出
复制代码- Load Kernel...
- Uncompressing Linux...
|
之后就系统就不再运行,偶尔会出现uncompression error system halted的信息
之前这块板子也是烧过系统的,可以运行,但刷机后就出现了问题