我现在烧好系统后,从nand flash启动需要手动选择B选项 boot the system 能不能直接进入 不用手选 我在FriengdlyARM.ini里的配置是这样的
LCD-Mode = No
LCD-Type = VGA1024X768
CheckOneButton=No
Action=install
OS= Linux
VerifyNandWrite=No
StatusType = Beeper| LED
#################### Linux #####################
Linux-BootLoader = superboot-6410.bin
Linux-Kernel = Linux/zImage
Linux-CommandLine = root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs init=/linuxrc console=ttySAC0,115200
Linux-RootFs-InstallImage = Linux/rootfs_qtopia_qt4-slc.ubi
Linux-RootFs-RunImage = Linux/rootfs_qtopia_qt4.ext3
有人说把Linux-BootLoader = superboot-6410.bin删掉 就可以了 可是我试过了 同样需要手动选择!